The Friction and Wear Properties of ECP Surface-Treated Kevlar Fiber-Reinforced Thermoplastic Polymide Composites

被引：8
|
作者：
Li, J. [1 ]
Cai, C. L. [1 ]
机构：
[1] Shanghai Second Polytech Univ, Sch Mech & Elect Engn, Shanghai 201209, Peoples R China
来源：
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2010年 / 49卷 / 02期
关键词：
ECP; Friction and wear; Interfacial adhesion; Kevlar fiber; PI; MICROBOND TEST; INTERFACE; STRENGTH; TESTS;
D O I：
10.1080/03602550903284263
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Epoxy chloropropane (ECP) grafting modification method was used for the surface treatment of Kevlar fiber to improve the interfacial adhesion of the Kevlar fiber-reinforced polyimide (PI) composite. The surface characteristics of untreated and treated Kevlar fiber were characterized by Fourier transform infrared (FT-IR) spectroscope. The friction and wear properties of the polyimide (PI) composites filled with differently surface treated Kevlar fibers (20 vol%), sliding against GCr15 steel, were investigated on a ball-on-block reciprocating UMT-2MT tribometer. Experimental results revealed that ECP treatment largely reduced the friction and wear of Kevlar/PI composites. Scanning electron microscope (SEM) investigation of worn surfaces of PI composites showed that ECP treated Kevlar/PI composite had the strongest interfacial adhesion and the smoothest worn surface under given load and reciprocating sliding frequency.
引用
收藏
页码：178 / 181
页数：4
相关论文
共 50 条
  • [21] Pultrusion mechanics of fiber-reinforced thermoplastic composites
    Stavrov, VP
    Tsvirko, EN
    MECHANICS OF COMPOSITE MATERIALS, 1995, 31 (04) : 402 - 407
  • [22] Tribological Properties of Cyperus pangorei Fiber-Reinforced Polyester Composites (Friction and Wear Behavior of Cyperus pangorei Fiber/Polyester Composites)
    Rajini, N.
    Mayandi, K.
    Prabhakar, Manoj M.
    Siengchin, Suchart
    Ayrilmis, Nadir
    Bennet, C.
    Ismail, S. O.
    JOURNAL OF NATURAL FIBERS, 2021, 18 (02) : 261 - 273
  • [23] Friction and wear properties of carbon fiber reinforced polypropylene composites
    Li, Jian
    Cai, Chilan
    MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 2380 - 2383
  • [24] Friction and wear properties of UHMWPE composites reinforced with carbon fiber
    Xiong, DS
    MATERIALS LETTERS, 2005, 59 (2-3) : 175 - 179
  • [25] Sliding friction and wear behavior of thermoplastic polyimide composites filled with differently surface-treated poly-p-phenylenebenzobisoxazole fibers
    Yu, Liang
    Cheng, Xianhua
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2012, 226 (J8) : 697 - 704
  • [26] Viscoelastic and heat-resistant behavior of surface-treated areca fruit husk fiber-reinforced polymer composites
    Binoj, Joseph Selvi
    Jaafar, Mariatti
    Mansingh, Bright Brailson
    Raghu, Raman
    IRANIAN POLYMER JOURNAL, 2023, 32 (07) : 841 - 853
  • [27] Viscoelastic and heat-resistant behavior of surface-treated areca fruit husk fiber-reinforced polymer composites
    Joseph Selvi Binoj
    Mariatti Jaafar
    Bright Brailson Mansingh
    Raman Raghu
    Iranian Polymer Journal, 2023, 32 : 841 - 853
  • [28] FTIR Study and Mechanical Properties of Cellulose Fiber-Reinforced Thermoplastic Composites
    Merkel, Katarzyna
    Rydarowski, Henryk
    JOURNAL OF BIOBASED MATERIALS AND BIOENERGY, 2012, 6 (04) : 399 - 409
  • [29] Effect of surface modification of Kevlar fibre on friction and wear properties of UHMWPE composites
    Li, J.
    Ye, F. B.
    PLASTICS RUBBER AND COMPOSITES, 2010, 39 (06) : 264 - 267
  • [30] Comprehensive Review of the Properties and Modifications of Carbon Fiber-Reinforced Thermoplastic Composites
    Alshammari, Basheer A.
    Alsuhybani, Mohammed S.
    Almushaikeh, Alaa M.
    Alotaibi, Bander M.
    Alenad, Asma M.
    Alqahtani, Naif B.
    Alharbi, Abdullah G.
    POLYMERS, 2021, 13 (15)
12345