Influence of curvature Ratio on Post-buckling Behaviour of Imperfect Cylindrical Panels Subjected to Axial Compressive Load

被引：0

作者：

Reddy, D. V. Ramana ^{[1
]}

Gunda, Jagadish Babu ^{[2
]}

Padal, K. T. Balaram ^{[3
]}

机构：

[1] Vardhman Coll Engn, Hyderabad 501218, Telangana, India

[2] Adv Syst Lab, Dr APJ Abdul Kalam Missile Complex, Hyderabad 500058, Telangana, India

[3] Andhra Univ, Coll Engn, Dept Mech Engn, Visakhapatnam 530003, Andhra Pradesh, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 11期

关键词：

Equilibrium path approach; Eigen imperfection shapes; Post-buckling; Imperfect cylindrical panels; Axial compressive load; Nonlinear finite element analysis approach; Curvature (or Radius) influence; knock-down factors;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Post-buckling behavior of imperfect, laminated composite cylindrical panels subjected to axial compressive load has been investigated by means of an equilibrium path approach which uses an arc-length method. Influence of the eigen imperfection shapes and its magnitude on the post-buckling behavior of the cylindrical panel with different curvature (R/t) ratios is briefly discussed for different unidirectional lay-up sequences of interest with all the sides considered as simply supported boundary configuration. Influence of curvature ratio on the post buckling behavior of cylindrical panel is briefly discussed where the thickness of the shell is considered as constant throughout this study while the radius (or curvature) of the panel varies according to the specified (R/t) ratio of the panel. (C) 2018 Elsevier Ltd. All rights reserved. Selection and/or Peer-review under responsibility of International Conference on Advances in Materials and Manufacturing Applications [IConAMMA 2017].

引用

页码：24367 / 24377

页数：11

共 50 条

[41] Axial post-buckling of thin orthotropic cylindrical shells with foam core
Huang, X
Lu, G
THIN-WALLED STRUCTURES: ADVANCES AND DEVELOPMENTS, 2001, : 477 - 482
[42] Post-buckling behaviour of graphite/epoxy stiffened panels with initial imperfections subjected to eccentric biaxial compression loading
Romeo, G
Frulla, G
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 1997, 32 (06) : 1017 - 1033
[43] Buckling and Post-buckling Behaviour of Prismatic Aluminium Columns Submitted to a Series of Compressive Loads
A. Ziółkowski
S. Imiełowski
Experimental Mechanics , 2011, 51 : 1335 - 1345
[44] EFFECTS OF ECCENTRICITY OF LOAD OR COMPRESSION ON BUCKLING AND POST-BUCKLING BEHAVIOUR OF FLAT PLATES
RHODES, J
HARVEY, JM
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1971, 13 (10) : 867 - &
[45] Modal analysis and imperfection sensitivity of the post-buckling behaviour of cylindrical steel panels under in-plane bending
Martins, Andre Dias
Silvestre, Nuno
ENGINEERING STRUCTURES, 2020, 207
[46] Buckling and Post-buckling Behaviour of Prismatic Aluminium Columns Submitted to a Series of Compressive Loads
Ziolkowski, A.
Imieowski, S.
EXPERIMENTAL MECHANICS, 2011, 51 (08) : 1335 - 1345
[47] Experimental study on ultimate strength of CK20 steel cylindrical panels subjected to compressive axial load
Shariati, M.
Sedighi, M.
Saemi, J.
Elpakchi, H. R.
Allahbakhsh, H. R.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2010, 10 (02) : 117 - 130
[48] Buckling behaviour of imperfect spherical shells subjected to different load conditions
Technical Univ of Denmark, Lyngby, Denmark
Thin-Walled Struct, 1-4 (41-55):
[49] Buckling and post-buckling of a compressible slab under combined axial compression and lateral load
Wang, Fan-Fan
Wang, Yuanbin
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 2017, 97 (06): : 686 - 698
[50] Research on the brace post-buckling compressive resistance under cyclic axial loading
Yu, Haifeng
Zhang, Wenyuan
Zhang, Yaochun
Du, Shoujun
Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2010, 43 (SUPPL. 1): : 217 - 223

← 1 2 3 4 5 →