The effect of V-ring indenter on the sheared surface in the fine-blanking process of pawl

被引：42
|
作者：
Kwak, TS
Kim, YJ
Seo, MK
Bae, WB [1 ]
机构：
[1] Pusan Natl Univ, Sch Mech Engn, Pusan, South Korea
[2] Pusan Natl Univ, Grad Sch, Pusan, South Korea
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2003年 / 143卷
关键词：
fine blanking; pawl; V-ring indenter; sheared surface;
D O I：
10.1016/S0924-0136(03)00311-X
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Finite element analysis has been performed to investigate the effect of V-ring indenter on the sheared surface in the fine blanking of pawl, which is a part of the automotive safety belt and is made of AISI1045 sheet. The Cockcroft and Latham's fracture criterion and the element kill method are used in order to simulate the blanking operation successfully. Simulation results are obtained for various positions and heights of the V-ring indenter, and the experimental results are compared with theoretical results. It is shown that the FEM simulation results can be useful for predicting the optimal condition for fine blanking products. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：656 / 661
页数：6
相关论文
共 50 条
  • [41] Comparative study of v-ring indenter configurations in fineblanking in order to derive tool design guidelines
    Nuernberger, Anian
    Mueller, Daniel
    Martinitz, Lukas
    Hartmann, Christoph
    Tobie, Thomas
    Stahl, Karsten
    Volk, Wolfram
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (11-12): : 4171 - 4179
  • [42] Qualitative Analysis and Study the Workpiece Shearing Surface Quality of Fine-blanking with Negative Clearance
    Du, H.
    Zhang, Z. M.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIV, 2012, 697-698 : 371 - +
  • [43] A Study of Forming Force in the Fine-blanking Process Using the Theoretical Predication and Experimental Approach
    Elyasi, Majid
    Daeizadeh, Vahid
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 999 - +
  • [44] Application of a large-strain analysis technique to the combined fine-blanking and extrusion process
    Zheng, PF
    Lee, TC
    Chan, LC
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2005, 40 (03): : 263 - 273
  • [45] Comparative study of v-ring indenter configurations in fineblanking in order to derive tool design guidelines
    Anian Nürnberger
    Daniel Müller
    Lukas Martinitz
    Christoph Hartmann
    Thomas Tobie
    Karsten Stahl
    Wolfram Volk
    The International Journal of Advanced Manufacturing Technology, 2022, 123 : 4171 - 4179
  • [46] Formability of the heat-assisted fine-blanking process for 304 stainless steel plates
    Zheng, Qide
    Zhuang, Xincun
    Hu, Jun
    Zhao, Zhen
    MATERIALS CHARACTERIZATION, 2020, 166 (166)
  • [47] An experimental study on the die roll height according to the V-ring distance of the fine blanking tool for the seat recliner holder with various corner shapes
    Kim, Jong-Deok
    Heo, Young-Moo
    Kim, Heung-Kyu
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 2012, 626 : 109 - 113
  • [48] Fine-blanking process simulation by rigid viscous-plastic FEM coupled with void damage
    Li, YM
    Peng, YH
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2003, 39 (5-6) : 457 - 472
  • [49] 3D FEM modeling of gear wheel fine-blanking forming and the process optimization
    Xie, Xiao-Long
    Zhao, Zhen
    Yu, Song
    Chen, Jun
    Li, Ming-Hui
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2006, 40 (10): : 1649 - 1653
  • [50] Mechanical characteristic analysis of a separable stator fabricated by fine-blanking process with numerical and experimental methods
    Yanxiong Liu
    Yue Xiong
    Lin Hua
    Lin Yang
    Weijun Zeng
    The International Journal of Advanced Manufacturing Technology, 2021, 112 : 2435 - 2445
12345