INVESTIGATION OF HARDNESS AND SURFACE ROUGHNESS IN END MILLING GLASS FIBRE REINFORCED POLYMER COMPOSITE

被引：0
|
作者：
Kumar, M. Senthil [1 ]
机构：
[1] Kumaraguru Coll Technol, Dept Aeronaut Engn, Coimbatore, Tamil Nadu, India
来源：
METALURGIJA | 2019年 / 58卷 / 1-2期
关键词：
GFRP; hardness; scanning electron microscopy (SEM); machining; wind turbine;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The increase use of glass fibre reinforced polymer (GFRP) composites in recent years has led to an increased demand for machining. Milling of glass fiber reinforced polymer (GFRP) composites becomes essential in order to enhance its surface quality. In this paper, optimization of machining parameters in milling of horizontal axis wind turbine (HAWT) blade wrapped with E-glass fiber reinforced plastics (GFRP) composites with multi-response criteria-based desirability function analysis (DFA). The machining parameters such as spindle speed (A), feed rate (13) and depth of cut (C) are optimized by considering multiple response characteristics namely surface roughness (Ra) and hardness (HB). The desirability at a high of 0,83 provides minimum surface roughness about 2,64 pm 0,7 and maximum hardness about 49,12 BH.
引用
收藏
页码：109 / 112
页数：4
相关论文
共 50 条
  • [21] Evaluation of delamination damage and surface roughness in end milling flax fibre composites
    Mustafa, A. R.
    Azmi, A., I
    Zakaria, M. S.
    Lih, T. C.
    6TH INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING, 2019, 670
  • [22] An investigation into the drilling of carbon and glass fibre reinforced polymer composites
    Charlton, Peter
    Curnick, Paul
    Donne, Kelvin
    Thomas, Richard
    8TH INTERNATIONAL CONFERENCE ON CONDITION MONITORING AND MACHINERY FAILURE PREVENTION TECHNOLOGIES 2011, VOLS 1 AND 2, 2011, : 1333 - 1345
  • [23] Effects of polishing on surface roughness and hardness of glass-fiber-reinforced polypropylene
    Tanimoto, Yasuhiro
    Nagakura, Manamu
    DENTAL MATERIALS JOURNAL, 2018, 37 (06) : 1017 - 1022
  • [24] Effect of Cutting Parameters On The Surface Roughness Of MWCNT Reinforced Epoxy Composite Using End-Milling Process
    Rao, G. Harii Krishna
    Ansari, M. N. M.
    NANOTECHNOLOGY 2012, VOL 1: ADVANCED MATERIALS, CNTS, PARTICLES, FILMS AND COMPOSITES, 2012, : 252 - 255
  • [25] Experimental investigation of glass powder reinforced polymer composite
    Bhaskar, K. B.
    Devaraju, A.
    Paramasivam, A.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 484 - 487
  • [26] Pocket milling of composite fibre-reinforced polymer using industrial robot
    de Melo, Ever Grisol
    Klein, Tiago Borsoi
    Reinkober, Sascha
    Gomes, Jefferson de Oliveira
    Uhlmann, Eckart
    2ND CIRP CONFERENCE ON COMPOSITE MATERIAL PARTS MANUFACTURING, 2019, 85 : 183 - 188
  • [27] Abrasive water jet machining of glass fibre reinforced polymer composite: experimental investigation, modelling and optimization
    Anil Kumar Dahiya
    Basanta Kumar Bhuyan
    Shailendra Kumar
    International Journal on Interactive Design and Manufacturing (IJIDeM), 2023, 17 : 1933 - 1947
  • [28] Abrasive water jet machining of glass fibre reinforced polymer composite: experimental investigation, modelling and optimization
    Dahiya, Anil Kumar
    Bhuyan, Basanta Kumar
    Kumar, Shailendra
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2023, 17 (04): : 1933 - 1947
  • [29] CTE ASSESSMENT OF VARIOUS GLASS FIBRE REINFORCED POLYMER COMPOSITE ARCHITECTURES
    Pop, Mihai Alin
    Luca Motoc, Dana
    Constantinescu, Alexandru
    Geaman, Virgil
    Derczeni, Rudolf Alexandru
    METALURGIA INTERNATIONAL, 2013, 18 : 131 - 134
  • [30] Glass Fibre Reinforced Polymer Composite Structures for Electrical Transmission Lines
    Toth, J. C.
    PROCEEDINGS OF THE 21ST INTERNATIONAL SYMPOSIUM ON HIGH VOLTAGE ENGINEERING, VOL 2, 2020, 599 : 549 - 561
12345