STRUCTURE AND MECHANICAL PROPERTIES OF EXPLOSIVE WELDED Mg/Al BIMETAL

被引:8
|
作者
Balga, D. [1 ]
Ostroushko, D. [2 ]
Saksl, K. [1 ]
Mazancova, E. [2 ]
Milkovic, O. [3 ]
机构
[1] Slovak Acad Sci, Inst Mat Res, Kosice 04001, Slovakia
[2] Tech Univ Ostrava, Fac Met & Mat Engn, Ostrava 70833, Czech Republic
[3] Tech Univ Kosice, Fac Met, Kosice 04200, Slovakia
关键词
explosive welding; Mg/Al bimetal; micro-hardness; micro-diffraction; PETRA III;
D O I
10.2478/amm-2014-0270
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
In the article we analyzed shape, local mechanical properties, chemical and phase composition of Magnesium/Aluminium cladded material prepared by explosion welding. In particular we focus our investigation on Mg/Al interface and areas close to the joint. Hardness of the joined materials measured far from their interface is similar for both materials, however in the region of interface the hardness drops down by 40%. Phase transformations in the interface was examined by a hard X-ray micro-diffraction experiment performed at beamline P07 at PETRA III at the energy of 99 keV which helped us identify in Al: fcc-Al, Al2Cu tetragonal and Al7Cu2Fe tetragonal and in Mg: hcp-Mg, Mg2Si cubic phases. In the interface we haven't observed any new intermetallics, but computation of lattice parameters and profiles of Al and Mg peaks proved an existence of solid solution with different gradient of chemical composition.
引用
收藏
页码:1593 / 1597
页数:5
相关论文
共 50 条
  • [41] Effect of Mg Loss on Mechanical Properties of Electron-Beam-Welded Al5083
    Choi, Sang-Hoon
    Ali, Basit
    Hyun, Soong-Keun
    Lee, Tae-Hyuk
    Seo, Seok-Jun
    Kim, Bum-Sung
    Kim, Taek-Soo
    Park, Kyoung-Tae
    SCIENCE OF ADVANCED MATERIALS, 2016, 8 (04) : 909 - 915
  • [42] Microstructure and mechanical properties of friction stir welded Al-Zn-Mg-Cu alloy
    Liu, Shengdan
    Dai, Yun
    Wu, Yulong
    Chen, Bin
    Zhang, Xinming
    MATERIALS SCIENCE, MECHANICAL ENGINEERING AND APPLIED RESEARCH, 2014, 628 : 7 - 11
  • [43] Microstructures and mechanical properties of TIG welded Al-Mg2Si alloy joints
    Qin, Qingdong
    Zhao, Honglong
    Li, Juan
    Zhang, Yingzhe
    Zhang, Bangrui
    Su, Xiangdong
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 : 941 - 949
  • [44] Microstructure and mechanical properties of Mg/Al joints welded by ultrasonic spot welding with Zn interlayer
    Gu, Xiaoyan
    Sui, Chenglong
    Liu, Jing
    Li, Donglai
    Meng, Zhengyu
    Zhu, Kaixuan
    MATERIALS & DESIGN, 2019, 181
  • [45] Microstructures and Mechanical Properties of Al-12.7Si-0.7Mg Alloy Welded Joints
    Wang, Dong
    He, Changshu
    Qi, Zhenyu
    Wang, Hao
    Zhao, Xiang
    Zuo, Liang
    ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4, 2013, 712-715 : 623 - +
  • [46] Microstructure and mechanical properties of spot welded Al-5.5Mg-0.3Cu alloy
    Jiang, D
    Kang, SB
    Kim, HW
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 1997, 2 (06) : 255 - 260
  • [47] Insight on Interfacial Microstructure and Corrosion Characteristics of Mg/Al Explosive Welded Composite Plates
    Lu, Yuchen
    Li, Huizhong
    Liang, Xiaopeng
    Chen, Zhi
    Zeng, Zhiheng
    Zhao, Ming-Chun
    Atrens, Andrej
    ADVANCED ENGINEERING MATERIALS, 2024, 26 (20)
  • [48] Microstructure and mechanical properties of Ti/Al explosive cladding
    Xia, Hong-bo
    Wang, Shao-gang
    Ben, Hai-feng
    MATERIALS & DESIGN, 2014, 56 : 1014 - 1019
  • [49] Effect of electromagnetic stirring on interfacial microstructure and mechanical properties of Al/Mg bimetal produced by lost foam compound casting
    Yu, Linghui
    Ma, Yuxi
    Li, Qingqing
    Xu, Yuancai
    Yu, Xiaopeng
    Peng, Ziwei
    Jiang, Wenming
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 2101 - 2111
  • [50] Combined effects of ultrasonic vibration and FeCoNiCrCu coating on interfacial microstructure and mechanical properties of Al/Mg bimetal by compound casting
    Xu, Yuan-cai
    Jiang, Wen-ming
    Li, Qing-qing
    Yu, Ling-hui
    Yu, Xiao-peng
    Fan, Zi-tian
    CHINA FOUNDRY, 2024, 21 (05) : 588 - 598