Electrochemical performance of a mechanochemically prepared submicron-sized crystalline Nd1.8Ce0.2CuO4±δ cathode for intermediate temperature solid oxide fuel cells

被引：11

作者：

Khandale, A. P. ^{[1
]}

Bhoga, S. S. ^{[1
]}

机构：

[1] RTM Nagpur Univ, Dept Phys, Nagpur 440033, Maharashtra, India

来源：

ELECTROCHIMICA ACTA | 2011年 / 56卷 / 25期

关键词：

Cathode; Mixed-ionic-electronic conductors (MIECs); dc conductivity; Electrochemical impedance spectroscopy (EIS); Intermediate temperature solid oxide fuel cell (IT-SOFC); Area specific resistance (ASR); SUBSTITUTED ND2CUO4; OXYGEN;

D O I：

10.1016/j.electacta.2011.07.130

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

To produce a Nd 1.8Ce 0.2CuO 4±δ solid solution, the oxide form of the reagents were milled for 36 h and sintered at 1173 K for 8 h in a microwave furnace. The transition from a negative temperature coefficient (NTC) of conductivity to a positive temperature coefficient (PTC) was suppressed due to the submicron size of the crystallites. The low-frequency response in the complex impedance plane fit the Gerischer element. At 973 K, the area specific resistance (ASR) of Nd 1.8Ce 0.2CuO 4±δ/GDC/Nd 1.8Ce 0.2CuO 4±δ sintered at 1073 K for 2 h was 1.92 ohm cm 2. © 2011 Elsevier Ltd. All rights reserved.

引用

页码：9219 / 9223

页数：5

共 50 条

[41] Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ/Ce0.85Sm0.15O2-δ-CuO as a cathode for intermediate temperature solid oxide fuel cells
Zhao, Shuang
Tian, Ning
Yu, Ji
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 825 (825)
[42] A cobalt-free composite cathode prepared by a superior method for intermediate temperature solid oxide fuel cells
Zhu, Zhiwen
Yan, Litao
Sun, Wenping
Liu, Haowei
Liu, Tong
Liu, Wei
JOURNAL OF POWER SOURCES, 2012, 217 : 431 - 436
[43] SrFe0.8Mo0.2O3-δ: Cathode material for intermediate temperature solid oxide fuel cells
Meng, Junling
Liu, Xiaojuan
Yao, Chuangang
Han, Lin
Liang, Qingshuang
Wu, Xiaojie
Meng, Jian
SOLID STATE IONICS, 2014, 260 : 43 - 48
[44] Interface engineering to improve electrochemical performance of intermediate-temperature solid oxide fuel cells
Yoo, Hyun Sik
Kim, Seo Ju
Megra, Yonas Tsegaye
Lee, Jongseo
Suk, Ji Won
Lee, Wonyoung
APPLIED SURFACE SCIENCE, 2023, 639
[45] Electrochemical performance and stability of the cathode for solid oxide fuel cells: V. high performance and stable Pr2NiO4 as the cathode for solid oxide fuel cells
Zhou, X. -D.
Templeton, J. W.
Nie, Z.
Chen, H.
Stevenson, J. W.
Pederson, L. R.
ELECTROCHIMICA ACTA, 2012, 71 : 44 - 49
[46] Ag-composite cathode for high-performance, intermediate temperature, solid oxide fuel cells
Kim, Manjin
Chean, Neoh Ke
Li, You Kai
Choi, Hyung Jong
Shim, Joon Hyung
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2016, 251
[47] High performance cobalt-free perovskite cathode for intermediate temperature solid oxide fuel cells
Niu, Yingjie
Zhou, Wei
Sunarso, Jaka
Ge, Lei
Zhu, Zhonghua
Shao, Zongping
JOURNAL OF MATERIALS CHEMISTRY, 2010, 20 (43) : 9619 - 9622
[48] Effect of Co doping on the properties of Sr0.8Ce0.2MnO3-δ cathode for intermediate-temperature solid-oxide fuel cells
Gu, Haitao
Chen, Han
Gao, Ling
Zheng, Yifeng
Zhu, Xiaofang
Guo, Lucun
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2008, 33 (17) : 4681 - 4688
[49] Fabrication and electrochemical characterizations of Nd2NiO4+δ-Ce0.8Gd0.2O2-δ composite cathodes for anode-supported intermediate temperature solid oxide fuel cells
Li, Silin
Tu, Hengyong
Yu, Lijun
Anwar, Muhammad Tuoqeer
ELECTROCHIMICA ACTA, 2016, 212 : 303 - 312
[50] Electrochemical Performance of NiCo2O4 Spinel Cathodes for Intermediate Temperature Solid Oxide Fuel Cells
Thaheem, Imdadullah
Ali, Shamshad
Waqas, Muhammad
Hussain, Ayaz
Soomro, Afaque Manzoor
Bhutto, Zuhaibuddin
Shah, Syed Ali Raza
Muhammad, Wazir
Shah, Jalal
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2022, 219 (01):

← 1 2 3 4 5 →