Error analysis and in-process compensation on cup wheel grinding of hard sphere

被引：8

作者：

Li, Dongdong ^{[1
]}

Xu, Mingming ^{[1
]}

Wei, Chenjun ^{[1
]}

Hu, Dejin ^{[1
]}

Xu, Liming ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai 200030, Peoples R China

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2011年 / 51卷 / 06期

关键词：

Error analysis; Sphere grinding; Cup wheel; Adjustable depth of cut; SURFACES;

D O I：

10.1016/j.ijmachtools.2011.03.004

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Grinding using cup wheel has been widely used in hard sphere machining process. In conventional sphere grinding (CSG), the linear velocity of the point with the same latitude on the sphere varies, which causes the sphericity error. The misalignment of the machine tool is another source of sphericity error. In this paper, these two types of sphericity errors are analyzed, and an adjustable depth of cut sphere grinding (ADCSG) is proposed to reduce the sphericity error. CSG and ADCSG were carried out on a home-made MD6050 NC precision sphere grinding machine, and the effectiveness of ADCSG is demonstrated with grinding tests. The results showed that ADCSG can reduce the sphericity error effectively compared with CSG. The sphericity error can reach less than 5 mu m. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：543 / 548

页数：6

共 50 条

[31] In-Situ Vision Detection and Compensation of Wheel Profile Error in Profile Grinding
Hu Y.
Xu L.
Fan F.
Zhang Z.
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2019, 53 (06): : 654 - 659
[32] Iteration-based error compensation for a worn grinding wheel in solid cutting tool flute grinding
Liu, Xianli
Chen, Zhan
Ji, Wei
Wang, Lihui
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47), 2019, 34 : 161 - 167
[33] Geometrical analysis on the side grinding of steel roll with CBN cup wheel
Zhou, Sheng
Pan, Xianjun
Feng, Baofu
Hu, Guofang
Cai, Guangqi
Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, 2003, (03):
[34] Research and Application of Automatic Compensation Technology for Grinding Wheel in the Process of Regrinding
Xia Xiaojun
Bai Song
Liu Fei
Wang Hongjuan
Dai Junlan
2013 25TH CHINESE CONTROL AND DECISION CONFERENCE (CCDC), 2013, : 3618 - 3623
[35] Geometrical analysis of roller grinding with CBN cup-shaped grinding wheel's face
Zhou, S
Pan, XJ
Hu, GF
Cai, GQ
Feng, BF
ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2 : 357 - 360
[36] The Effect of Optimum In-Process Electrolytic Dressing in the Ultraprecision Grinding of Die Steel by a Superabrasive Wheel
E.-S. Lee
The International Journal of Advanced Manufacturing Technology, 2000, 16 : 814 - 821
[37] In-process detection of grinding wheel truing and dressing conditions using a flapper nozzle arrangement
Maksoud, TMA
Mokbel, AA
Morgan, JE
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 1997, 211 (05) : 335 - 343
[38] Effect of optimum in-process electrolytic dressing in the ultraprecision grinding of die steel by a superabrasive wheel
Lee, E.-S.
1600, Springer-Verlag London Ltd., London, United Kingdom (16):
[39] The effect of optimum in-process electrolytic dressing in the ultraprecision grinding of die steel by a superabrasive wheel
Lee, ES
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2000, 16 (11): : 814 - 821
[40] In-Process Error-Matching Measurement and Compensation Method for Complex Mating
Wang, Shih-Ming
Tu, Ren-Qi
Gunawan, Hariyanto
SENSORS, 2021, 21 (22)

← 1 2 3 4 5 →