Error analysis and in-process compensation on cup wheel grinding of hard sphere

被引：8

作者：

Li, Dongdong ^{[1
]}

Xu, Mingming ^{[1
]}

Wei, Chenjun ^{[1
]}

Hu, Dejin ^{[1
]}

Xu, Liming ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Mech Engn, Shanghai 200030, Peoples R China

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2011年 / 51卷 / 06期

关键词：

Error analysis; Sphere grinding; Cup wheel; Adjustable depth of cut; SURFACES;

D O I：

10.1016/j.ijmachtools.2011.03.004

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Grinding using cup wheel has been widely used in hard sphere machining process. In conventional sphere grinding (CSG), the linear velocity of the point with the same latitude on the sphere varies, which causes the sphericity error. The misalignment of the machine tool is another source of sphericity error. In this paper, these two types of sphericity errors are analyzed, and an adjustable depth of cut sphere grinding (ADCSG) is proposed to reduce the sphericity error. CSG and ADCSG were carried out on a home-made MD6050 NC precision sphere grinding machine, and the effectiveness of ADCSG is demonstrated with grinding tests. The results showed that ADCSG can reduce the sphericity error effectively compared with CSG. The sphericity error can reach less than 5 mu m. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：543 / 548

页数：6

共 50 条

[1] In-process error compensation for tooth form grinding works - (robust error estimation algorithm against the measuring error and experimental result of the in-process grinding error compensation)
Harada, T
Kotani, K
Miyoshi, T
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2001, 44 (02): : 360 - 366
[2] Error analysis and compensation of line contact spherical grinding with cup-shaped wheel
Yanglin Peng
Yifan Dai
Ci Song
Shanyong Chen
The International Journal of Advanced Manufacturing Technology, 2016, 83 : 293 - 299
[3] Error analysis and compensation of line contact spherical grinding with cup-shaped wheel
Peng, Yanglin
Dai, Yifan
Song, Ci
Chen, Shanyong
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (1-4): : 293 - 299
[4] Evaluation of cup-wheel truing and error compensation in aspheric grinding
Mechanical and Automotive Engineering College, Xiamen University of Technology, Xiamen, China
不详
不详
Qiangjiguang Yu Lizishu, 4
[5] Automatic compensation for grinding wheel wear by pressure based in-process measurement in wet grinding
Furutani, K
Hieu, NT
Ohguro, N
Nakamura, T
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2003, 27 (01): : 9 - 13
[6] Grinding with automatic in-process wheel balancing
Abrasives, 1994,
[7] IN-PROCESS EXAMINATION OF WHEEL SURFACE DURING GRINDING OPERATIONS
SUTO, T
WAIDA, T
SATA, T
MACHINERY AND PRODUCTION ENGINEERING, 1969, 115 (2967): : 515 - &
[8] In-process measurement of wear of grinding wheel by hydrodynamic pressure
Furutani, K
Katoh, T
Mohri, N
PROCEEDINGS OF THE FOURTEENTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1999, : 610 - 613
[9] Method for dynamic compensation of system error of in-process measuring of grinding machine based on neural network
Chen, S
Zhang, H
ICEMI'2003: PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON ELECTRONIC MEASUREMENT & INSTRUMENTS, VOLS 1-3, 2003, : 1642 - 1645
[10] Electrolytic in-process dressing grinding of sapphire with nanodiamond composite wheel
Kato, T. (kteruko@riken.jp), 1600, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (09): : 5 - 6

← 1 2 3 4 5 →