HYPOEUTECTIC Al-Si ALLOY DOPED WITH CHROMIUM, TUNGSTEN AND MOLYBDENUM DESIGNATED FOR PRESSURE DIE CASTING

被引：4
|
作者：
Szymczak, T. [1 ]
Gumienny, G. [1 ]
Kurowska, B. [1 ]
Pacyniak, T. [1 ]
机构：
[1] Lodz Univ Technol, Dept Mat Engn & Prod Syst, 1-15 Stefanowskiego Str, PL-90924 Lodz, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2017年 / 62卷 / 03期
关键词：
Multicomponent Al-Si alloys; pressure die casting; DTA method; ALUMINUM ZINC-ALLOYS;
D O I：
10.1515/amm-2017-0249
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Structural modification of hypoeutectic Al-Si alloy EN-AC 46000 alloy influences its microstructure and mechanical properties. In a series of examinations the EN-AC 46000 alloy has been doped with Cr, W and Mo. The study involved the differential thermal analysis (DTA) and the light microscopy structural analysis of the samples cut from pressure die castings and from samples cast into the DTA cup. The DTA and microstructure analyses revealed new phases in the alloy doped with mentioned additives. The strength properties measurements of the alloys doped with Cr, W and Mo showed significant improvement in tensile strength and elongation, while preserving good hardness.
引用
收藏
页码：1629 / 1635
页数：7
相关论文
共 50 条
  • [21] Numerical modeling of microstructure evolution and dendrite growth for Al-Si alloy casting during low pressure die casting
    Li, B.
    Xu, Q. Y.
    Liu, B. C.
    PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 1787 - 1792
  • [22] Mechanism and Tendency of Die Erosion In Al-Si Casting alloy for Permanent Mold Casting Process
    Kim, Bonghwan
    Lee, Sangmok
    ADVANCED DESIGN TECHNOLOGY, 2012, 421 : 77 - 80
  • [23] Grain refinement and eutectic solidification mechanism of Al-Si hypoeutectic alloy in centrifugal casting with electromagnetic field
    Zhang, Zhiqing
    Li, Qiulin
    Liu, Wei
    Liu, Qing
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 3132 - +
  • [24] SOME OBSERVATIONS OF THE EFFECTS OF OVERHEATING IN A HYPOEUTECTIC AL-SI ALLOY
    PRASAD, BK
    DAN, TK
    ZEITSCHRIFT FUR METALLKUNDE, 1991, 82 (02): : 124 - 128
  • [25] Formation of the microstructure of rapidly solidified hypoeutectic Al-Si alloy
    Olga Gusakova
    Vasiliy Shepelevich
    Dmitri V. Alexandrov
    Ilya O. Starodumov
    The European Physical Journal Special Topics, 2020, 229 : 417 - 425
  • [26] THE EFFECT OF ROTATION ON THE EUTECTIC PHASE IN HYPOEUTECTIC AL-SI ALLOY
    BASAK, PS
    RAY, BC
    CHAKRABARTY, I
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1991, 10 (06) : 313 - 315
  • [27] Detection of the reheating state of semisolid hypoeutectic Al-Si alloy
    2005, Journal Office of Special Casting and Nonferrous Alloys, Hankou, China (25):
  • [28] Formation of the microstructure of rapidly solidified hypoeutectic Al-Si alloy
    Gusakova, Olga
    Shepelevich, Vasiliy
    Alexandrov, Dmitri V.
    Starodumov, Ilya O.
    EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 2020, 229 (2-3): : 417 - 425
  • [29] Nucleation and growth of eutectic cell in hypoeutectic Al-Si alloy
    Sun Yu
    Pang Shao-ping
    Liu Xue-ran
    Yang Zi-run
    Sun Guo-xiong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (10) : 2186 - 2191
  • [30] On the characterization of primary iron-rich phase in a high-pressure die-cast hypoeutectic Al-Si alloy
    Jiao, X. Y.
    Liu, C. F.
    Guo, Z. P.
    Nishat, Harood
    Tong, G. D.
    Ma, S. L.
    Bi, Y.
    Zhang, Y. F.
    Wiesner, Stuart
    Xiong, S. M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 862
12345