Analysis on Energy Efficiency and Optimization of HIsmelt Process

被引：17

作者：

Cao, Chao-zhen ^{[1
]}

Meng, Yu-jie ^{[1
]}

Yan, Fang-xing ^{[1
]}

Zhang, Dian-wei ^{[2
]}

Li, Xin ^{[1
]}

Zhang, Fu-ming ^{[1
]}

机构：

[1] Beijing Shougang Int Engn Technol Co Ltd, Beijing, Peoples R China

[2] Shougang Res Inst Technol, Beijing, Peoples R China

来源：

ENERGY TECHNOLOGY 2019: CARBON DIOXIDE MANAGEMENT AND OTHER TECHNOLOGIES | 2019年

关键词：

HIsmelt; Smelting reduction; Iron-making; Energy efficiency; Improvement;

D O I：

10.1007/978-3-030-06209-5_1

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

HIsmelt process is a clean and efficient iron-making technology. The production of the first HIsmelt commercial plant of China, which was built in 2016, is stable at present, and remarkable results have been achieved in environmental protection and production cost aspects. The energy efficiency and its main influencing factors of HIsmelt process were systematically analyzed in this paper, combining with China's HIsmelt plant production practice. It has been pointed out that the main restrictive factors are the high efficient utilization of high temperature and low calorific value SRV off-gas to further improve the energy efficiency of HIsmelt. It introduced the process improvement and optimization of the HIsmelt plant in China, around the hot air blast position control, iron ore powder preheating, gas purification, and waste heat recovery.

引用

页码：3 / 11

页数：9

共 50 条

[21] Enhancing the Energy Efficiency of Domestic Dryer by Drying Process Optimization
Wei, Yuhui
Gong, R. Hugh
Ning, Lin
Ding, Xuemei
DRYING TECHNOLOGY, 2018, 36 (07) : 790 - 803
[22] Analysis and optimization of energy for total process system
Yang, Wan-Hong
Meng, Xiao-Qiong
Du, Jian
Zhu, Kang-Ling
Huagong Xiandai/Modern Chemical Industry, 2002, 22 (07): : 39 - 42
[23] Green HetNet CoMP: Energy Efficiency Analysis and Optimization
Huq, Kazi Mohammed Saidul
Mumtaz, Shahid
Bachmatiuk, Joanna
Rodriguez, Jonathan
Wang, Xianbin
Aguiar, Rui L.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2015, 64 (10) : 4670 - 4683
[24] Energy efficiency analysis and resource optimization - By means of discrete event structures in the manufacturing process of a prismatic part
Rentsch, Rüdiger
Brinksmeier, Ekkard
ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2015, 110 (10): : 620 - 624
[25] Integrating process optimization with energy-efficiency scheduling to save energy for paper mills
Zeng, Zhiqiang
Hong, Mengna
Li, Jigeng
Man, Yi
Liu, Huanbin
Li, Zeeman
Zhang, Huanhuan
APPLIED ENERGY, 2018, 225 : 542 - 558
[26] Optimization of Energy and Resource Efficiency in a Multistage Drying Process of Phosphate Pellets
Meshalkin, Valery
Bobkov, Vladimir
Dli, Maksim
Dovi, Vincenzo
ENERGIES, 2019, 12 (17)
[27] IMPROVING ENERGY EFFICIENCY IN SINGLE DECK KILNS BY OPTIMIZATION OF THE PROCESS VARIABLES
ENRIQUE, JE
BLASCO, A
MONFORT, E
MALLOL, G
CFI-CERAMIC FORUM INTERNATIONAL, 1995, 72 (05): : 255 - 260
[28] Foam mat drying of coffee aqueous extract: Foam process optimization, drying kinetics, energy consumption, and energy efficiency analysis
Lopes, Melissa A.
Fernandes, Jordana A.
Perazzini, Hugo
Borel, Lidja D. M. S.
Lima-Correa, Renata A. B.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2024, 201
[29] Structure and Casting Process Optimization of Inclined Copper Cooling Stave for HIsmelt Furnace Using Process Simulation Based on Taguchi Method
Song-Ryong O
Gwang-Hi O
Won-Chol Yang
International Journal of Metalcasting, 2024, 18 : 1012 - 1025
[30] Structure and Casting Process Optimization of Inclined Copper Cooling Stave for HIsmelt Furnace Using Process Simulation Based on Taguchi Method
Song-Ryong, O.
Gwang-Hi, O.
Yang, Won-Chol
INTERNATIONAL JOURNAL OF METALCASTING, 2024, 18 (02) : 1012 - 1025

← 1 2 3 4 5 →