Characterization of mixing in an optimized designed T-T mixer with cylindrical elements

被引:19
|
作者
Dundi, T. Manoj [1 ]
Raju, V. R. K. [1 ]
Chandramohan, V. P. [1 ]
机构
[1] Natl Inst Technol Warangal, Mech Engn Dept, Warangal, Telangana, India
关键词
CFD-simulation; Cylindrical elements; Micromixers; Mixing quality; Obstructions; T-T-mixer; BUBBLY FLOWS; MICROMIXER; PERFORMANCE; MICROCHANNELS;
D O I
10.1016/j.cjche.2019.01.030
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Passive micromixers are preferred over active mixers for many microfluidic applications due to their relative ease in integration into complex systems and operational flexibility. They also incur very low cost of manufacturing. However, the degree of mixing is comparatively low in passive mixers than active mixers due to the absence of disturbance in the flow by external forces and the inherent laminar nature of microchannel flows. Various designs of complex channel structures and three-dimensional geometries have been investigated in the past to obtain an efficient mixing in passive mixers. But the studies on mixing enhancement with simple planar geometries of passive mixers have been few and limited. The present work aims to investigate the possibility of mixing enhancement by employing simple planar type designs, such as T-mixer and T-T mixer with cylindrical elements placed in the mixing channel. The mixing performance has been evaluated in the Reynolds number range of 6 to 700. Numerical results have shown that T-T mixer with cylindrical elements performed significantly well and obtained very good mixing quality over basic T-mixer for the entire range of Reynolds number (6 to 700). The device has also shown better mixing as compared to basic T-T mixer and T-mixer with cylindrical elements. A larger pair of vortices formed in the stagnation area due to the presence of a cylindrical element in the junction. Cylindrical elements downstream caused significant enhancement in mixing due to splitting and recombining action. The size of the cylindrical element in the T-T mixer has been optimized to obtain better mixing performance of the device. Remarkable improvement in mixing quality by T-T mixer with cylindrical elements has been obtained at the expense of small rise in pressure drop as compared to other passive designs considered in this study. Therefore, the current design of T-T mixer with cylindrical elements can act as an effective and simple passive mixing device for various micromixing applications. (C) 2019 The Chemical Industry and Engineering Society of China. and Chemical Industry Press Co., Ltd. All rights reserved.
引用
收藏
页码:2337 / 2351
页数:15
相关论文
共 50 条
  • [41] Mixing Performance of a 3D Micro T-Mixer with Swirl-Inducing Inlets and Rectangular Constriction
    Zhang, Jinxin
    Luo, Xiaoping
    MICROMACHINES, 2018, 9 (05)
  • [42] Characterization of laminar transient flow regimes and mixing in T-shaped micromixers
    Dreher, Simon
    Kockmann, Norbert
    Woias, Peter
    HEAT TRANSFER ENGINEERING, 2009, 30 (1-2) : 91 - 100
  • [43] Structural and petrographic characterization of the Fotouni-Kekem Shear Zone: implication for P–T-t regional metamorphism and mylonitic evolutions along the Central Cameroon Shear Zone
    Tcheumenak Kouémo Jules
    Fozing Eric Martial
    Zagalo Al-hadj Hamid
    Noudiedie Kamgang Julie Agathe
    Kwékam Maurice
    Njonfang Emmanuel
    Arabian Journal of Geosciences, 2023, 16 (1)
  • [44] Characterization of microgels by Brookfield viscometry with cylindrical, t-bar, and flags impeller spindles
    Wu, CS
    Kwak, YT
    JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 71 (01) : 67 - 74
  • [45] Fly Ash Characterization for Rare Earth Elements (REEs) Beneficiation in Türkiye
    Cincin, Yasin
    Bayat, Oktay
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2024,
  • [46] Characterization of the mixing regimes of Newtonian fluid flows in asymmetrical T-shaped micromixers
    Calado, Bernardo
    dos Santos, Aires
    Semiao, Viriato
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2016, 72 : 218 - 227
  • [47] Numerical simulation for electro-osmotic mixing under three types of periodic potentials in a T-shaped micro-mixer
    Cheng, Youliang
    Jiang, Yan
    Wang, Wenyang
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2018, 127 : 93 - 102
  • [48] DEVELOPMENT AND CHARACTERIZATION OF FUSION PROTEINS FOR IDENTIFYING CYTOKINE-OPTIMIZED CART-T CELLS
    Kelly, W. J.
    Fisher, J.
    Dessain, S.
    CYTOTHERAPY, 2023, 25 (06) : S231 - S232
  • [49] Effect of channel aspect ratio of 3-D T-mixer on flow patterns and convective mixing for a wide range of Reynolds number
    Cortes-Quiroz, C. A.
    Azarbadegan, A.
    Zangeneh, M.
    SENSORS AND ACTUATORS B-CHEMICAL, 2017, 239 : 1153 - 1176
  • [50] Application of pressure-sensitive paint for the characterization of mixing with various gases in T-type micromixers
    Huang, Chih-Yung
    Hu, Yu-Hsiang
    Wan, Shaw-An
    Nagai, Hiroki
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 156 (156)