The effect of poling conditions on the performance of piezoelectric energy harvesters fabricated by wet chemistry

被引：17

作者：

Fuentes-Fernandez, Erika M. A. ^{[1
]}

Gnade, Bruce E. ^{[1
]}

Quevedo-Lopez, Manuel A. ^{[1
]}

Shah, Pradeep ^{[2
]}

Alshareef, H. N. ^{[3
]}

机构：

[1] Univ Texas Dallas, Richardson, TX 75080 USA

[2] Texas Micro Power Inc, Dallas, TX 75254 USA

[3] King Abdullah Univ Sci & Technol, Thuwal 239556900, Saudi Arabia

来源：

JOURNAL OF MATERIALS CHEMISTRY A | 2015年 / 3卷 / 18期

关键词：

LEAD-ZIRCONATE-TITANATE; PB(ZR; TI)O3; THIN-FILMS; PZT CERAMICS; GENERATOR; LAYER; MEMS;

D O I：

10.1039/c5ta00447k

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The effect of poling conditions on the power output of piezoelectric energy harvesters using sol-gel based Pb(Zr-0.53, Ti-0.47)O-3-Pb(Zn-1/3, Nb-2/3)O-3 piezoelectric thin-films has been investigated. A strong correlation was established between the poling efficiency and harvester output. A method based on simple capacitance-voltage measurements is shown to be an effective approach to estimate the power output of harvesters poled under different conditions. The poling process was found to be thermally activated with an activation energy of 0.12 eV, and the optimum poling conditions were identified (200 kV cm(-1), 250 degrees C for 50 min). The voltage output and power density obtained under optimum poling conditions were measured to be 558 V cm(-2) and 325 mu W cm(-2), respectively.

引用

页码：9837 / 9842

页数：6

共 50 条

[21] Influence of NRMs on energy-generation performance of piezoelectric harvesters
Wang, S.-Y. (jutwsy@163.com), 1864, Chinese Academy of Sciences (22):
[22] Dynamic performance of piezoelectric energy harvesters with a multifunctional nanocomposite substrate
Moradi-Dastjerdi, Rasool
Behdinan, Kamran
APPLIED ENERGY, 2021, 293
[23] Performance enhancement of cantilever piezoelectric energy harvesters by sizing analysis
Hajheidari, Peyman
Stiharu, Ion
Bhat, Rama
INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS, 2020, 11 (02) : 93 - 116
[24] PERFORMANCE OF GALLOPING PIEZOELECTRIC ENERGY HARVESTERS WITH SQUARE BLUFF BODY
Ewere, Felix
Wang, Gang
PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS - 2013, VOL 2, 2014,
[25] Dynamic measurement setups for validating piezoelectric energy harvesters in driving conditions
Mangone, Carmela
Kaewsakul, Wisut
van Swaaij, Andries P. J.
Bandzierz, Katarzyna
Gunnewiek, Michel Klein
Blume, Anke
POLYMER TESTING, 2023, 119
[26] Determination of maximum power transfer conditions of bimorph piezoelectric energy harvesters
Al Ahmad, Mahmoud
Elshurafa, A. M.
Salama, K. N.
Alshareef, H. N.
JOURNAL OF APPLIED PHYSICS, 2012, 111 (10)
[27] Effect of elastic restraints in the modeling of prestressed piezoelectric energy harvesters
Osinaga, S. M.
Febbo, M.
Machado, S. P.
APPLIED MATHEMATICAL MODELLING, 2022, 101 : 573 - 585
[28] Modeling, validation, and performance of low-frequency piezoelectric energy harvesters
Abdelkefi, Abdessattar
Barsallo, Nilma
Tang, Lihua
Yang, Yaowen
Hajj, Muhammad R.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2014, 25 (12) : 1429 - 1444
[29] Maximum Performance of Piezoelectric Energy Harvesters When Coupled to Interface Circuits
Miller, Lindsay M.
Elliott, Alwyn D. T.
Mitcheson, Paul D.
Halvorsen, Einar
Paprotny, Igor
Wright, Paul K.
IEEE SENSORS JOURNAL, 2016, 16 (12) : 4803 - 4815
[30] Performance comparisons of piezoelectric energy harvesters under different stochastic noises
Zhou, Sha
Yu, Tianjun
AIP ADVANCES, 2020, 10 (03)

← 1 2 3 4 5 →