The effect of poling conditions on the performance of piezoelectric energy harvesters fabricated by wet chemistry

被引：17

作者：

Fuentes-Fernandez, Erika M. A. ^{[1
]}

Gnade, Bruce E. ^{[1
]}

Quevedo-Lopez, Manuel A. ^{[1
]}

Shah, Pradeep ^{[2
]}

Alshareef, H. N. ^{[3
]}

机构：

[1] Univ Texas Dallas, Richardson, TX 75080 USA

[2] Texas Micro Power Inc, Dallas, TX 75254 USA

[3] King Abdullah Univ Sci & Technol, Thuwal 239556900, Saudi Arabia

来源：

JOURNAL OF MATERIALS CHEMISTRY A | 2015年 / 3卷 / 18期

关键词：

LEAD-ZIRCONATE-TITANATE; PB(ZR; TI)O3; THIN-FILMS; PZT CERAMICS; GENERATOR; LAYER; MEMS;

D O I：

10.1039/c5ta00447k

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The effect of poling conditions on the power output of piezoelectric energy harvesters using sol-gel based Pb(Zr-0.53, Ti-0.47)O-3-Pb(Zn-1/3, Nb-2/3)O-3 piezoelectric thin-films has been investigated. A strong correlation was established between the poling efficiency and harvester output. A method based on simple capacitance-voltage measurements is shown to be an effective approach to estimate the power output of harvesters poled under different conditions. The poling process was found to be thermally activated with an activation energy of 0.12 eV, and the optimum poling conditions were identified (200 kV cm(-1), 250 degrees C for 50 min). The voltage output and power density obtained under optimum poling conditions were measured to be 558 V cm(-2) and 325 mu W cm(-2), respectively.

引用

页码：9837 / 9842

页数：6

共 50 条

[1] Effect of piezoelectric layer thickness and poling conditions on the performance of cantilever piezoelectric energy harvesters on Ni foils
Yeo, Hong Goo
Trolier-McKinstry, Susan
SENSORS AND ACTUATORS A-PHYSICAL, 2018, 273 : 90 - 97
[2] Performance of galloping piezoelectric energy harvesters
Ewere, Felix
Wang, Gang
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2014, 25 (14) : 1693 - 1704
[3] JOINT CHARACTERISTIC EFFECT ON THE PERFORMANCE OF NONLINEAR PIEZOELECTRIC ENERGY HARVESTERS
Jahani, Kamal
Aghazadeh, Parisa
PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2016, VOL 2, 2016,
[4] Effect of Electrode Structure on the Performance of Fully Printed Piezoelectric Energy Harvesters
Montero, Karem Lozano
Laurila, Mika-Matti
Mäntysalo, Matti
IEEE Journal on Flexible Electronics, 2022, 1 (01): : 24 - 31
[5] Performance of microfabricated piezoelectric vibration energy harvesters
duToit, Noel E.
Wardle, Brian L.
INTEGRATED FERROELECTRICS, 2006, 83 : 13 - 32
[6] Performance comparison of implantable piezoelectric energy harvesters
Mo, Changki
Radziemski, Leon J.
Clark, William W.
ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2008, 2008, 6928
[7] Effect of Poling Orientation in Performance of Piezoelectric Materials
Adhikari, Jitendra
Kumar, Rajeev
Narain, Vikas
Jain, Satish Chandra
MACHINES, MECHANISM AND ROBOTICS, INACOMM 2019, 2022, : 1721 - 1732
[8] Effect of length/width ratio of tapered beams on the performance of piezoelectric energy harvesters
Matova, S. P.
Renaud, M.
Jambunathan, M.
Goedbloed, M.
Van Schaijk, R.
SMART MATERIALS AND STRUCTURES, 2013, 22 (07)
[9] High-Performance Piezoelectric Energy Harvesters and Their Applications
Yang, Zhengbao
Zhou, Shengxi
Zu, Jean
Inman, Daniel
JOULE, 2018, 2 (04) : 642 - 697
[10] Scaling and Performance Analysis of MEMS Piezoelectric Energy Harvesters
Sriramdas, Rammohan
Pratap, Rudra
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2017, 26 (03) : 679 - 690

← 1 2 3 4 5 →