Micromechanical modeling of the constitutive response of FRCM composites

被引：20
|
作者：
Nerilli, Francesca [1 ]
Marfia, Sonia [2 ]
Sacco, Elio [3 ]
机构：
[1] Univ Niccola Cusano Telemat Roma, Via Don C Gnocchi 13, I-00166 Rome, Italy
[2] Univ Roma Tre, Dipartimento Ingn, Via Vito Volterra 62, I-00146 Rome, Italy
[3] Univ Napoli Federico II, Dipartimento Strutture Ingn & Architettura, Via Claudio 21, I-80125 Naples, Italy
来源：
CONSTRUCTION AND BUILDING MATERIALS | 2020年 / 236卷
关键词：
FRCM; Micromechanics; Nonlinear interface; TEXTILE REINFORCED-CONCRETE; COHESIVE MATERIAL LAW; MECHANICAL-PROPERTIES; TENSILE BEHAVIOR; BOND BEHAVIOR; SYSTEMS; FRP; SIMULATION; STRENGTH;
D O I：
10.1016/j.conbuildmat.2019.117539
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
In this paper, the tensile and shear constitutive behavior of Fiber Reinforced Cementitious Matrix (FRCM) composites is addressed. A nonlinear finite-element computational approach is developed, by accounting for the micromechanical mechanisms via the introduction of interface elements inside and between the FRCM constituents, i.e. fibers and mortar. The damage, the friction and the unilateral contact are considered for reproducing the mortar cracking and the slippage between the fibers and the mortar. The numerical approach is illustrated and it is validated with an available experimental result, highlighting the effectiveness of such proposed modeling approach for reproducing the constitutive tensile behavior of FRCM materials. Finally, the shear behavior is investigated, also considering cyclic loading patterns under different compressive load levels. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数：16
相关论文
共 50 条
  • [41] Micromechanical modeling of unidirectional composites with uneven interfacial strengths
    Vajari, Danial Ashouri
    Legarth, Brian Nyvang
    Niordson, Christian F.
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2013, 42 : 241 - 250
  • [42] A strain-rate dependent micromechanical constitutive model for glass/epoxy composites
    Shokrieh, Mahmood M.
    Mosalmani, Reza
    Omidi, Majid Jamal
    COMPOSITE STRUCTURES, 2015, 121 : 37 - 45
  • [43] A micromechanical cyclic constitutive model for ratchetting deformation of polymeric composites with imperfect interface
    Qin, Fangping
    Lu, Fucong
    Zhang, Chuanbiao
    Huang, Long
    Hou, Yuhang
    POLYMER COMPOSITES, 2024, 45 (01) : 893 - 913
  • [44] Micromechanical modeling of packing and size effects in particulate composites
    Marcadon, V.
    Herve, E.
    Zaoui, A.
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2007, 44 (25-26) : 8213 - 8228
  • [45] Micromechanical modeling of tensile behavior of short fiber composites
    Meddad, A
    Azaiez, J
    Ait-Kadi, A
    Guénette, R
    JOURNAL OF COMPOSITE MATERIALS, 2002, 36 (04) : 423 - 441
  • [46] Micromechanical deformation modeling and failure prediction of thermoplastic composites
    Song, Zhuoyu
    Li, Tong
    Wang, Haoqi
    Wang, Bo
    ENGINEERING FRACTURE MECHANICS, 2023, 288
  • [47] Modeling of anisotropic polydispersed composites by progressive micromechanical approach
    A.MOHYEDDIN
    A.FEREIDOON
    Applied Mathematics and Mechanics(English Edition), 2013, 34 (03) : 363 - 370
  • [48] Micromechanical modeling of particulate composites for damping of acoustic waves
    Haberman, Michael R.
    Berthelot, Yves H.
    Cherkaoui, Mohammed
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2006, 128 (03): : 320 - 329
  • [49] Micromechanical Modeling of Unidirectional CFRP Composites with Proportional Stressing
    Su, Zhoucheng
    Wang, Dan
    Guo, Tianfu
    Sridhar, N.
    JOURNAL OF MULTISCALE MODELLING, 2021, 12 (04)
  • [50] Micromechanical modeling of smart composites considering debonding of reinforcements
    Shabana, Yasser M.
    Ristinmaa, Matti
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2011, 48 (22-23) : 3209 - 3216
12345