Analysis of changes of saturation magnetization and specific volume during phase transformations of Fe-C alloys

被引：0

作者：

Belous, MV ^{[1
]}

Hryhoryeva, OV ^{[1
]}

Lakhnik, AM ^{[1
]}

Sidorenko, SI ^{[1
]}

Demchenko, LD ^{[1
]}

机构：

[1] Kievskii Politekhnicheskii Inst Natl Tech Univ, UA-03056 Kiev, Ukraine

来源：

METALLOFIZIKA I NOVEISHIE TEKHNOLOGII | 2004年 / 26卷 / 09期

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A given work is concerned with investigation of additive properties of alloys-saturation magnetization and specific volume. The method is proposed for calculation of additive properties of alloys using experimental data. The experimental data relate to the changes of properties during the phase transformations. Such a method permits to obtain the information about the distribution of carbon in steel over,the phases and states. The corresponding equations are obtained for description of the volume changes during the tempering of quenched steel and during the austenitization, for description of changes of a saturation magnetization during the different treatments and for the quantitative analysis of the data of measurements.

引用

页码：1171 / 1179

页数：9

共 50 条

[41] Changes of phase composition in nanocrystalline Fe-C and Fe-Ni-C induced by severe deformation
Schneeweiss, O., 1600, Trans Tech Publ, Aedermannsdorf, Switzerland (97-98):
[42] THERMODYNAMIC ANALYSIS OF THE FE-C AND FE-N PHASE-DIAGRAMS
AGREN, J
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1979, 10 (12): : 1847 - 1852
[43] Massive transformation from δ phase to γ phase in Fe-C alloys and strain induced in solidifying shell
Yasuda, H.
Nagira, T.
Yoshiya, M.
Sugiyama, A.
Nakatsuka, N.
Kiire, M.
Uesugi, M.
Uesugi, K.
Umetani, K.
Kajiwara, K.
MCWASP XIII: INTERNATIONAL CONFERENCE ON MODELING OF CASTING, WELDING AND ADVANCED SOLIDIFICATION PROCESSES, 2012, 33
[44] Redistribution of carbon during the austenite to ferrite transformation in pure Fe-C alloys
Onink, M.
Brakman, C.M.
Root, J.H.
Tichelaar, F.D.
Mittemeijer, E.J.
van der Zwaag, S.
Materials Science Forum, 1994, 163-6 (pt 1) : 63 - 68
[45] THERMODYNAMICS OF THE MASSIVE, BAINITIC AND MARTENSITIC TRANSFORMATIONS IN FE-C, FE-NI, FE-CR AND FE-CU ALLOYS
ZHAO, JC
JIN, ZP
ACTA METALLURGICA ET MATERIALIA, 1990, 38 (03): : 425 - 431
[46] CHROMIUM-SATURATION AND CARBON-SATURATION OF POWDER PRESSLINGS OF FE-C ALLOYS USING RAPID ELECTRIC-HEATING
BOYKO, LV
ANDRYUSHECHKIN, VI
RUSSIAN METALLURGY, 1981, (04): : 169 - 172
[47] Structural and phase transformations during isothermal annealing of mechanically alloyed iron-amorphous Fe-C phase nanocomposite: Formation of cementite
Elsukov, EP
Fomin, VM
Vytovtov, DA
Dorofeev, GA
Zagainov, AV
Arsent'eva, NB
Lomaeva, SF
PHYSICS OF METALS AND METALLOGRAPHY, 2005, 100 (03): : 251 - 269
[48] STUDY OF PHASE-TRANSFORMATIONS IN FE-C ALLOYS WITH CARBON CONTENT UP TO 2.0-PERCENT BY THE MAGNETIC-SUSCEPTIBILITY METHOD
LIAKUTKIN, AV
GRIGOROVICH, VK
IVAKHNENKO, IS
DOKLADY AKADEMII NAUK SSSR, 1984, 275 (06): : 1449 - 1451
[49] PHASE-TRANSFORMATIONS IN FE-MN-TI-C ALLOYS
TKACHENKO, FK
EFREMENKO, VG
MAISTRUK, AY
TKACHENKO, IF
RUSSIAN METALLURGY, 1988, (03): : 204 - 207
[50] CHANGES OF PHASE-COMPOSITION IN NANOCRYSTALLINE FE-C AND FE-NI-C INDUCED BY SEVERE DEFORMATION
SCHNEEWEISS, O
KOCOVA, M
PLASTICITY OF METALS AND ALLOYS - ISPMA 6, 1994, 97-9 : 73 - 77

← 1 2 3 4 5 →