Influence of heat treatment on microstructure and mechanical properties of titanium alloy grade TI6AL4V

被引：1
|
作者：
Bogucki, R. [1 ]
Hytros, E. [1 ]
机构：
[1] Cracow Univ Technol, Fac Mat Sci & Phys, Inst Mat Engn, Al Jana Pawla II 37, PL-31864 Krakow, Poland
来源：
DEVELOPMENT OF ECO-FRIENDLY COMPOSITE MATERIALS BASED ON GEOPOLYMER MATRIX AND REINFORCED WITH WASTE FIBERS | 2019年 / 706卷
关键词：
PHASE-TRANSFORMATIONS; KINETICS;
D O I：
10.1088/1757-899X/706/1/012014
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
In this work, the effect of heat treatment on the control of the volume share of a phase in a two-phase titanium alloy alpha + beta from the Ti6Al4V grade was analyzed. The applied heat treatments resulted in obtaining a volume share of alpha phase in the range of 60% to 96%. The highest hardness was obtained with a sample share 88% a phase, which was characterized by a microstructure consisting of grains of alpha phase and beta. phase regions of the phase precipitates of alpha'.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Mechanical Properties and Microstructure of a High-Power Laser-Welded Ti6Al4V Titanium Alloy
    Zhen Chen
    Bingfeng Wang
    Bohua Duan
    Journal of Materials Engineering and Performance, 2020, 29 : 2296 - 2304
  • [32] Study on microstructure and mechanical properties of LDM-SLM hybrid manufactured Ti6Al4V titanium alloy
    Wang W.
    Zhang L.
    Li C.
    Qin L.
    Yang G.
    Liu Y.
    Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering, 2019, 48
  • [33] The Effect of Rotary Friction Welding Conditions on the Microstructure and Mechanical Properties of Ti6Al4V Titanium Alloy Welds
    Gavalec, Matus
    Barenyi, Igor
    Krbata, Michal
    Kohutiar, Marcel
    Balos, Sebastian
    Pecanac, Milan
    MATERIALS, 2023, 16 (19)
  • [34] Mechanical Properties and Microstructure of a High-Power Laser-Welded Ti6Al4V Titanium Alloy
    Chen, Zhen
    Wang, Bingfeng
    Duan, Bohua
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (04) : 2296 - 2304
  • [35] Influence of heat treatment conditions on the mechanical properties of Ti-6Al-4V alloy
    El-Hadad, S.
    Nady, M.
    Khalifa, W.
    Shash, A.
    CANADIAN METALLURGICAL QUARTERLY, 2018, 57 (02) : 186 - 193
  • [36] Characterization and Properties of Boriding Titanium Alloy Ti6Al4V
    Kaouka, A.
    Benarous, K.
    ACTA PHYSICA POLONICA A, 2020, 137 (04) : 493 - 495
  • [37] Vacuum Oxidation Treatment on Ti6Al4V Titanium Alloy
    Yang, Chuang
    Liu, Jing
    Ma, Ya-Qin
    Xiao, Fa-Qin
    Surface Technology, 2017, 46 (05): : 165 - 170
  • [38] INFLUENCE OF THERMOMECHANICAL TREATMENT ON THE MECHANICAL-PROPERTIES OF TI6AL4V
    GRUNDHOFF, KJ
    SCHURMANN, H
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1989, 20 (08) : 284 - 289
  • [39] Cryogenic treatment on Ti6Al4V alloy fabricated by electron beam melting: microstructure and mechanical properties
    Huang, Xina
    Ding, Shoubin
    Yue, Wen
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 3323 - 3332
  • [40] Microstructural Influence on Mechanical Properties in Plasma Microwelding of Ti6Al4V Alloy
    M. Baruah
    S. Bag
    Journal of Materials Engineering and Performance, 2016, 25 : 4718 - 4728
12345