Monomode Optical Waveguides in Yb3+-Doped Silicate Glasses Produced by Low-Dose Carbon Ion Implantation

The planar waveguide has been fabricated in the Yb3+-doped silicate glass by 4.0 MeV C2+ ion implantation at a dose of 2 x 10(14) ions/cm(2). The guided modes are measured using a model 2010 prism coupler at 633 nm. The near-field profiles of the planar waveguide are obtained with an end-face coupling system. The refractive index profile of the waveguide is reconstructed by the intensity calculation method, which shows a typical "enhanced well + barrier" distribution. The SRIM'2006 code is carried out to simulate the energy loss during the implantation in order to obtain a better understanding of the waveguide formation. After post-implantation treatment at 260 degrees C for 1 h, the waveguide possesses a propagation loss of similar to 1.42 dB/cm. The acceptable guiding properties suggest that further waveguide lasers may be realized on the C-implanted Yb3+-doped silicate glass waveguides. (C) 2012 The Japan Society of Applied Physics