Analysis of crack kinking in foam core sandwich beams

被引：17
|
作者：
Yokozeki, Tomohiro [1 ]
机构：
[1] Univ Tokyo, Dept Aeronaut & Astronaut, Bunkyo Ku, Tokyo 1138656, Japan
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2011年 / 42卷 / 10期
关键词：
Layered structures; Debonding; Residual/internal stress; Analytical modeling; FRACTURE; DELAMINATION; MECHANICS; SPECIMEN;
D O I：
10.1016/j.compositesa.2011.06.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The crack kink angle and the steady state crack location of the core crack in sandwich beams are predicted by using the analytical formulation of energy release rates associated with core cracking in a double cantilever sandwich beam. The predicted analytical results are compared with experimental results available in the literature. It is demonstrated that the present analysis is in good agreement with overall crack kinking behavior in foam core sandwich beams. Finally, the effect of residual thermal stresses in sandwich beams on crack kinking is discussed using the present analytical method. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1493 / 1499
页数：7
相关论文
共 50 条
  • [31] Modeling of interfacial crack propagation and kinking in sandwich panels
    Odessa, Itay
    Rabinovitch, Oded
    Frostig, Yeoshua
    ENGINEERING FRACTURE MECHANICS, 2021, 242
  • [32] Peel strength improvement of foam core sandwich beams by epoxy resin impregnation on the foam surface
    Lee, CS
    Lim, TS
    Kwon, JW
    Lee, DG
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2003, 17 (05) : 687 - 701
  • [33] Failure analysis of sandwich beams with Balsa core
    Wan, Li
    Liu, Wei-Qing
    Zhou, Ding
    Fang, Hai
    Gongcheng Lixue/Engineering Mechanics, 2011, 28 (02): : 134 - 140
  • [34] Vibrations Analysis of Sandwich Beams with Viscoelastic Core
    Huang, Zhi-Cheng
    Qin, Zhao-Ye
    Chu, Fu-Lei
    INTERNATIONAL CONFERENCE ON MECHANISM SCIENCE AND CONTROL ENGINEERING (MSCE 2014), 2014, : 357 - 363
  • [35] A theoretical study of plastic analysis of fully clamped geometrical asymmetric sandwich beams with a metal foam core
    Zhang, Jianxun
    Qin, Qinghua
    Wang, Zhengjin
    Ai, Weilong
    Wang, T. J.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 99 : 98 - 111
  • [36] Analysis and optimization of foam core mid-plane asymmetric sandwich beams under lateral loads
    Vinson, Jack R.
    Satapathy, Nihar R.
    American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 2000, 245 : 181 - 189
  • [37] SIMULATION OF CRACK PATH IN FOAM-CORE CRACKED SANDWICH BEAM SPECIMEN
    Limpitipanich, Paiboon
    SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY, 2019, 26 (03): : 336 - 345
  • [38] Effects of material uncertainty in the structural response of metal foam core sandwich beams
    Beckmann, Carla
    Hohe, Joerg
    COMPOSITE STRUCTURES, 2014, 113 : 382 - 395
  • [39] Fatigue of foam core sandwich beams .2. effect of initial damage
    Burman, M
    Zenkert, D
    INTERNATIONAL JOURNAL OF FATIGUE, 1997, 19 (07) : 563 - 578
  • [40] Mixed-Mode II/III Fracture in Foam Core Sandwich Beams
    Rizov, V.
    CELLULAR POLYMERS, 2014, 33 (06) : 287 - 300
12345