Experimental study on thermo-mechanical properties of Beishan granite under mild temperature

被引:11
|
作者
Tian, Yunlei [1 ]
Chen, Shiwan [1 ,2 ]
Zuo, Shuangying [1 ,2 ]
Yang, Fubo [1 ]
He, Qi [1 ]
Zheng, Kexun [3 ]
机构
[1] Guizhou Univ, Coll Resources & Environm Engn, Guiyang 50025, Peoples R China
[2] Guizhou Univ, Key Lab Karst Georesources & Environm, Minist Educ, Guiyang 50025, Peoples R China
[3] Hydrochina Guiyang Engn Corp Geotech Engn Ltd, Guiyang 550081, Guizhou, Peoples R China
基金
中国国家自然科学基金;
关键词
Thermal healing; Acoustic emission; Load/unload response ratio (LURR); Felicity ratio (FR); MECHANICAL-PROPERTIES; ACOUSTIC-EMISSION; THERMAL-DAMAGE; TENSILE-STRENGTH; FG PLATES; BEHAVIOR; ROCK; PERMEABILITY; POROSITY; CRACKING;
D O I
10.1016/j.csite.2022.102271
中图分类号
O414.1 [热力学];
学科分类号
摘要
Temperature is believed to have an important influence on the mechanics behavior of granite. To investigate thermo-mechanical properties of Beishan granite, the host rock of China's preselected underground laboratory of high-level radioactive waste (HLW) geological repository, mechanical tests including uniaxial compression test and incremental cyclic loading-unloading test under mild temperature range (mom temperature to 300 degrees C) were carried out with Acoustic emission (AE) activity monitoring. Results show: (1) The temperature threshold for Beishan granite is 150 degrees C. The UCS (uniaxial compressive strength) is increasing and pore is healing with increasing temperature in the range of room temperature to 150 degrees C, while the UCS is decreasing and pore is enlarging with increasing temperature in the range of 150 degrees C-300 degrees C. (2) The cracking activity in the compression process is significantly influenced by the ambient temperature. The AE activity of Beishan granite under different temperature exhibits three patterns (inactive-active for granite under room temperature, active-inactive-active under 60 degrees C-150 degrees C, active-inactive for granite under 200 degrees C and 300 degrees C). (3) Results of incremental cyclic loading-unloading compression tests show that the peak stress, peak strain and AE energy of granite increase with the elevated temperature. The strength and ductility are enhanced with increasing temperature in the mild range. (4) AE activity during the incremental cyclic loading-unloading test is used for loading-unloading response ratio (LURR) and felicity ratio (FR) analysis. The LURR value keeps increasing before pre-failure stress under lower temperature, but shows decrease trend before failure under higher temperature. The stress corresponding to the sharp drop on FR is identified as the stress threshold for rock damage, which are 0.57.7, to 0.66.7, for Beishan granite under the mild temperature conditions. This work will provide support for the long-term safety assessment for the HLW geological disposal engineering.
引用
收藏
页数:11
相关论文
共 50 条
  • [41] Experimental study of thermo-mechanical behavior of SiC composite tubing under high temperature gradient using solid surrogate
    Alva, Luis
    Shapovalov, Kirill
    Jacobsen, George M.
    Back, Christina A.
    Huang, Xinyu
    JOURNAL OF NUCLEAR MATERIALS, 2015, 466 : 698 - 711
  • [42] An Experimental Study on the Mechanical Properties of High-Temperature Granite under Natural Cooling and Water Cooling
    Gao, Yanan
    Wang, Yunlong
    Lu, Taiping
    Li, Liuzhou
    Wu, Jinwen
    Zhang, Zetian
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [43] Experimental study of mechanical properties of granite under high/low temperature freeze-thaw cycles
    Jiang Li-hao
    Chen You-liang
    Liu Ming-liang
    ROCK AND SOIL MECHANICS, 2011, 32 : 319 - 323
  • [44] Mild acids facilitate functional dentin remineralization under thermo-mechanical stimuli
    Toledano-Osorio, Manuel
    Cabello, Inmaculada
    Lynch, Christopher D.
    Aguilera, Fatima S.
    AMERICAN JOURNAL OF DENTISTRY, 2018, 31 (03): : 155 - 165
  • [45] Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model
    Pingye Guo
    Mohua Bu
    Peng Zhang
    Jiamin Wang
    Zhaolong Luan
    Manchao He
    Rock Mechanics and Rock Engineering, 2023, 56 : 6411 - 6435
  • [46] Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model
    Guo, Pingye
    Bu, Mohua
    Zhang, Peng
    Wang, Jiamin
    Luan, Zhaolong
    He, Manchao
    ROCK MECHANICS AND ROCK ENGINEERING, 2023, 56 (09) : 6411 - 6435
  • [47] Effect of temperature on physical, mechanical and acoustic emission properties of Beishan granite, Gansu Province, China
    Yun Wu
    Xiao-Zhao Li
    Zhen Huang
    Sen Xue
    Natural Hazards, 2021, 107 : 1577 - 1592
  • [48] Effect of temperature on physical, mechanical and acoustic emission properties of Beishan granite, Gansu Province, China
    Wu, Yun
    Li, Xiao-Zhao
    Huang, Zhen
    Xue, Sen
    NATURAL HAZARDS, 2021, 107 (02) : 1577 - 1592
  • [49] Comparative experimental and modelling study of the thermal and thermo-mechanical properties of LLDPE/wax blends
    Mosoabisane, Mafereka F. T.
    Luyt, Adriaan S.
    van Sittert, Cornelia G. C. E.
    JOURNAL OF POLYMER RESEARCH, 2022, 29 (07)
  • [50] Comparative experimental and modelling study of the thermal and thermo-mechanical properties of LLDPE/wax blends
    Mafereka F. T. Mosoabisane
    Adriaan S. Luyt
    Cornelia G. C. E. van Sittert
    Journal of Polymer Research, 2022, 29