Low velocity impact behaviour of a hybrid carbon-epoxy/cork laminate

被引：8
|
作者：
Silva, F. G. A. [1 ,2 ]
de Moura, M. F. S. F. [2 ]
Magalhaes, A. G. [3 ]
机构：
[1] INEGI Inst Engn Mecan & Gestao Ind, Rua Dr Roberto Frias 400, P-4200465 Oporto, Portugal
[2] Univ Porto, FEUP, DEMec, Rua Dr Roberto Frias, P-4200465 Oporto, Portugal
[3] ISEP, Rua Dr Antonio Bernardino de Almeida 431, P-4200072 Oporto, Portugal
来源：
STRAIN | 2017年 / 53卷 / 06期
关键词：
carbon-epoxy laminates; cohesive zone modelling; cork; hybrid; impact behaviour; COMPOSITES; CORK;
D O I：
10.1111/str.12241
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
This work addresses low velocity impact behaviour of monolithic cross-ply carbon-epoxy and hybrid carbon-epoxy/cork laminates. The [0(4), 90(4)](s) layup was selected due to its high mismatch bending between different oriented layers, which is a critical aspect concerning large delamination development at these critical interfaces. The effect of a cork layer inserted at the most critical interface on low velocity impact behaviour of the carbon-epoxy laminate is discussed. Impact response and resulting damage profiles of monolithic and hybrid laminates are compared, and advantages of the hybrid solution are underlined. A numerical analysis including cohesive zone modelling was also performed to assess the damage profiles obtained for the two laminates analysed. The model revealed to be effective for a better comprehension of damage mechanism for both studied cases.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Mode II fracture characterization of a hybrid cork/carbon-epoxy laminate
    de Moura, M. F. S. F.
    Fernandes, R.
    Silva, F. G. A.
    Dourado, N.
    COMPOSITES PART B-ENGINEERING, 2015, 76 : 44 - 51
  • [2] Mode I fracture characterization of a hybrid cork and carbon-epoxy laminate
    Fernandes, R.
    de Moura, M. F. S. F.
    Silva, F. G. A.
    Dourado, N.
    COMPOSITE STRUCTURES, 2014, 112 : 248 - 253
  • [3] Prediction of low velocity impact damage in carbon-epoxy laminates
    de Moura, MFSF
    Marques, AT
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (03) : 361 - 368
  • [4] Residual strength after low velocity impact in carbon-epoxy laminates
    Amaro, A. M.
    Reis, P. N. B.
    Moura, M. F. S. F.
    ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 : 624 - 628
  • [5] Low-Velocity Impact Behaviour of Titanium-Based Carbon-Fibre/Epoxy Laminate
    Sun, Jing
    Chen, Weilin
    Luo, Hongjie
    Xie, Xingfang
    Zhang, Jingzhou
    Ding, Chao
    MATERIALS, 2024, 17 (21)
  • [6] LOW VELOCITY IMPACT RESISTANCE OF ALUMINUM/CARBON-EPOXY FIBER METAL LAMINATES
    Bienias, Jaroslaw
    Jakubczak, Patryk
    COMPOSITES THEORY AND PRACTICE, 2012, 12 (03): : 193 - 197
  • [7] Impact velocity effect on the delamination of woven carbon-epoxy plates subjected to low-velocity equienergetic impact loads
    Zabala, H.
    Aretxabaleta, L.
    Castillo, G.
    Urien, J.
    Aurrekoetxea, J.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 94 : 48 - 53
  • [8] Oblique Low-Velocity Impact Response and Damage Behavior of Carbon-Epoxy Composite Laminates
    Sun, Jin
    Huang, Linhai
    Zhao, Junhua
    MATERIALS, 2022, 15 (15)
  • [9] Acoustic emission to model the fatigue behaviour of quasi-isotropic carbon-epoxy laminate composites
    Tsamtsakis, D
    Wevers, M
    INSIGHT, 1999, 41 (08) : 513 - 516
  • [10] Mixed-mode I plus II fracture characterization of a hybrid carbon-epoxy/ cork laminate using the Single-Leg Bending test
    de Moura, M. F. S. F.
    Cavaleiro, P. M. L. C.
    Silva, F. G. A.
    Dourado, N.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 141 : 24 - 31
12345