Design of a novel parallel monolithic 6-DOF compliant micromanipulation mechanism

被引：0
|
作者：
Ghafarian, Mohammadali [1 ]
Shirinzadeh, Bijan [1 ]
Das, Tilok Kumar [1 ]
Al-Jodah, Ammar [1 ]
Wei, Weichen [1 ]
机构：
[1] Monash Univ, Dept Mech & Aerosp Engn, RMRL, Melbourne, Vic 3800, Australia
来源：
2018 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM) | 2018年
基金：
澳大利亚研究理事会;
关键词：
3-DOF; DISPLACEMENT;
D O I：
暂无
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
In this paper, a novel six degrees of freedom (DOF) monolithic micromanipulation system is proposed and investigated. The goal of this study is to develop a parallel micromanipulator with large workspace and natural frequency utilising piezoelectric actuators (PEAs). Specific attention is paid towards designing, finite element analysis (FEA) and investigating the effect of dominant parameters on the proposed mechanism. Further, the inverse kinematic model of the proposed design is developed via FEA and is used for the study of manipulation motion and the coupling effects. Results show the performance and capability of the proposed design.
引用
收藏
页码：997 / 1002
页数：6
相关论文
共 50 条
  • [1] The design and dynamic analysis of a novel 6-DOF parallel mechanism
    Xiuling Liu
    Qingquan Wang
    Alexander Malikov
    Hongrui Wang
    International Journal of Machine Learning and Cybernetics, 2012, 3 : 27 - 37
  • [2] The design and dynamic analysis of a novel 6-DOF parallel mechanism
    Liu, Xiuling
    Wang, Qingquan
    Malikov, Alexander
    Wang, Hongrui
    INTERNATIONAL JOURNAL OF MACHINE LEARNING AND CYBERNETICS, 2012, 3 (01) : 27 - 37
  • [3] Modeling and control system design of 6-DOF bionic parallel mechanism with compliant modules
    Li, Ruyue
    Zhu, Yaguang
    Zhou, Shuangjie
    He, Zhimin
    Sun, Junli
    Liu, Shaokui
    TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 2024, 46 (01) : 167 - 182
  • [4] PROTOTYPE DESIGN OF A 6-DOF COMPLIANT PARALLEL MICRO-MANIPULATOR
    Yue, Yi
    Gao, Feng
    Ge, Hao
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE - 2011, VOL 6, PTS A AND B, 2012, : 921 - 930
  • [5] Design of a novel parallel monolithic 3-DOF compliant micromanipulator
    Ghafarian, Mohammadali
    Shirinzadeh, Bijan
    Al-Jodah, Ammar
    Das, Tilok Kumar
    Wei, Weichen
    Tian, Yanling
    Zhang, Dawei
    PROCEEDINGS OF 2019 4TH INTERNATIONAL CONFERENCE ON MANIPULATION, AUTOMATION AND ROBOTICS AT SMALL SCALES (MARSS 2019), 2019,
  • [6] The Applications of Compliant Motion Control Technique on 6-DOF Hydraulic Parallel Mechanism
    Zheng, Shupeng
    Gao, Changhong
    Niu, Xinjian
    Cong, Dacheng
    Han, Junwei
    IEEE ACCESS, 2019, 7 : 90094 - 90105
  • [7] Design of a 6-DOF compliant manipulator based on serial-parallel architecture
    Chao, DH
    Zong, GH
    Liu, R
    2005 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS, VOLS 1 AND 2, 2005, : 765 - 770
  • [8] Design of a New 6-DOF Parallel Mechanism with a Suspended Platform
    Lim, Hoon
    Lee, Sang-Heon
    So, Byung-Rok
    Yi, Byung-Ju
    INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, 2015, 13 (04) : 942 - 950
  • [9] Design of a new 6-DOF parallel mechanism with a suspended platform
    Hoon Lim
    Sang-Heon Lee
    Byung-Rok So
    Byung-Ju Yi
    International Journal of Control, Automation and Systems, 2015, 13 : 942 - 950
  • [10] Mechanism design of a simplified 6-DOF 6-RUS parallel manipulator
    Liu, Xin-Jun
    Wang, Jinsong
    Gao, Feng
    Wang, Li-Ping
    Robotica, 2002, 20 (01) : 81 - 91
12345