Bio-drying of green waste with high moisture content

被引:28
|
作者
Mohammed, Mutala [1 ]
Ozbay, Ismail [1 ]
Durmusoglu, Ertan [1 ]
机构
[1] Kocaeli Univ, Dept Environm Engn, TR-41380 Izmit, Kocaeli, Turkey
关键词
Bio-drying; Green waste; Bulking agent; Moisture content; Calorific value; MUNICIPAL SOLID-WASTE; MECHANICAL-BIOLOGICAL TREATMENT; AIR-FLOW RATE; ORGANIC FRACTION; BULKING AGENT; BIODRYING PROCESS; RECOVERED FUEL; SEWAGE-SLUDGE; ENERGY; TECHNOLOGY;
D O I
10.1016/j.psep.2017.08.002
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In this study, the effect of bio-drying process on green waste was investigated. Four different sets of bio-drying processes were conducted and the impact of bulking agent (BA) evaluated. The laboratory experiment consisted of a 0.8 m(3) bio-drying reactor equipped with a matrix temperature measuring and air supply system. A 50 kg of green waste was placed in the reactor with an uninterrupted airflow rate of 0.3 m(3)/kg h. The results obtained indicated that the bio-drying process reduced the moisture content (MC) of waste with BA by 27% more than green waste alone after 7 days. Thus, allowing the production of bio-dried waste with a net calorific value of 6265 kJ/kg wet weight, 54% higher than its initial value with 37% decrease in weight in the original mass of the waste. Although on the average, bio-drying of green waste alone showed significant reduction in volume (87%), weight (54%) and increase in calorific value (118%), bio-dried matrix with BA was the most preferred option since the process produced no leachate and generated the highest calorific value. (C) 2017 Institution of Chemical Engineers. Published by Elsevier B.V. Ail rights reserved.
引用
收藏
页码:420 / 427
页数:8
相关论文
共 50 条
  • [22] Effects of sawdust addition on bio-drying efficiency and bacterial community of food waste
    Liu Y.
    Li W.
    Wang H.
    Tao Y.
    Chang Y.
    Zhou K.
    Ding X.
    Wei Y.
    Li J.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2023, 39 (15): : 208 - 216
  • [23] Sorting efficiency and combustion properties of municipal solid waste during bio-drying
    Zhang, Dong-Qing
    He, Pin-Jing
    Shao, Li-Ming
    WASTE MANAGEMENT, 2009, 29 (11) : 2816 - 2823
  • [24] Effect of sludge char addition on drying rate and decomposition rate of organic waste during bio-drying
    Kobayashi, Nobusuke
    Hamabe, Hisashi
    Yamaji, Satori
    Suami, Akira
    Itaya, Yoshinori
    JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2019, 21 (04) : 897 - 904
  • [25] Release of volatile organic compounds during bio-drying of municipal solid waste
    He, Pinjing
    Tang, Jiafu
    Zhang, Dongqing
    Zeng, Yang
    Shao, Liming
    JOURNAL OF ENVIRONMENTAL SCIENCES, 2010, 22 (05) : 752 - 759
  • [26] Synergistic Effects of Initial Moisture Content and Particle Size on Drying Rate and Heat Production during Bio-Drying of Sludge after Electro-Dewatering
    Li, Qian
    Yang, Zengjun
    Kong, Hao
    Zhang, Keqiang
    Guo, Haigang
    Zheng, Xiangqun
    ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2023, 11 (01) : 278 - 289
  • [27] Moisture variation associated with water input and evaporation during sewage sludge bio-drying
    Cai, Lu
    Gao, Ding
    Chen, Tong-Bin
    Liu, Hong-Tao
    Zheng, Guo-Di
    Yang, Qi-Wei
    BIORESOURCE TECHNOLOGY, 2012, 117 : 13 - 19
  • [28] Effect of sludge char addition on drying rate and decomposition rate of organic waste during bio-drying
    Nobusuke Kobayashi
    Hisashi Hamabe
    Satori Yamaji
    Akira Suami
    Yoshinori Itaya
    Journal of Material Cycles and Waste Management, 2019, 21 : 897 - 904
  • [29] Pre-treatment and utilization of food waste as energy source by bio-drying process
    Mohammed, Mutala
    Ozbay, Ismail
    Karademir, Aykan
    Isleyen, Mehmet
    INTERNATIONAL SCIENTIFIC CONFERENCE - ENVIRONMENTAL AND CLIMATE TECHNOLOGIES (CONECT 2017), 2017, 128 : 100 - 107
  • [30] Valorization of fruits, vegetables, and their by-products: Drying and bio-drying
    Tan, Choon Hui
    Hii, Ching Lik
    Borompichaichartkul, Chaleeda
    Phumsombat, Puttapong
    Kong, Ianne
    Pui, Liew Phing
    DRYING TECHNOLOGY, 2022, 40 (08) : 1514 - 1538