Mechanical Behavior of Alpha Titanium Alloys at High Strain Rates, Elevated Temperature, and under Stress Triaxiality

被引：6

作者：

Skripnyak, Vladimir V. ^{[1
]}

Skripnyak, Vladimir A. ^{[1
]}

机构：

[1] Natl Res Tomsk State Univ, Dept Deformable Solid Body Mech, Tomsk 634050, Russia

来源：

METALS | 2022年 / 12卷 / 08期

基金：

俄罗斯科学基金会;

关键词：

high strain rates; damage; fracture under tension; the stress triaxiality factor; elevated temperatures; titanium alloys; DYNAMIC TENSILE BEHAVIOR; DEFORMATION-BEHAVIOR; PURE TITANIUM; MODEL; FRACTURE; IDENTIFICATION; INTERMEDIATE; CRITERION; STEEL; PARAMETERS;

D O I：

10.3390/met12081300

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper presents the experimental results of the mechanical behavior of Ti-5Al-2.5Sn alloy at high strain rates and elevated temperature. Flat smooth and notched specimens with notch radii of 10 mm, 5 mm, and 2.5 mm were used. The experimental studies were carried out using the high-velocity servo hydraulic test machine Instron VHS 40/50-20. The samples were heated with flat ceramic infrared emitters on average between 60 s and 160 s. The temperature control in the working part of specimens was carried out in real time using a chromel-alumel thermocouple. The digital image correlation (DIC) method was employed to investigate the evolution of local fields in the gauge section of the specimen. Data on the influence of stress triaxiality on the ductility of Ti-5Al-2.5Sn alloy were obtained under tension with strain rates ranging from 0.1 to 10(3) s(-1) at a temperature of 673 K. It was found that, at 673 K, the ductility of Ti-5Al-2.5Sn alloy increases with the increasing strain rate for both smooth and notched specimens.

引用

页数：15

共 50 条

[31] Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels
Peng, Lei
Yang, Lu
Wang, Meng
Han, Yawei
Yan, Qiushi
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2023, 35 (05)
[32] STRESS CORROSION CRACKING OF ALPHA TITANIUM ALLOYS AT ROOM TEMPERATURE
POWELL, DT
SCULLY, JC
CORROSION, 1968, 24 (06) : 151 - &
[33] The dynamic response of a β titanium alloy to high strain rates and elevated temperatures
Zhan, Hongyi
Kent, Damon
Wang, Gui
Dargusch, Matthew S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 607 : 417 - 426
[34] Stress-strain behavior of sand at high strain rates
Omidvar, Mehdi
Iskander, Magued
Bless, Stephan
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2012, 49 : 192 - 213
[35] HIGH-STRENGTH ALLOYS UNDER STRESS IN CORROSIVE ENVIRONMENTS (STRESS-CORROSION-CRACKING BEHAVIOR IN TITANIUM ALLOYS)
JUDY, RW
GOODE, RJ
REPORT OF NRL PROGRESS, 1967, (JUL): : 38 - &
[36] Mechanical properties of near alpha titanium alloys for high-temperature applications-a review
Tabie, Vitus Mwinteribo
Li, Chong
Saifu, Wang
Li, Jianwei
Xu, Xiaojing
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2020, 92 (04): : 521 - 540
[37] Deformation of PC/ABS alloys at elevated temperatures and high strain rates
Yin, Z. N.
Wang, T. J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 494 (1-2): : 304 - 313
[38] Characterization of Material Ductility of PP/EPR/talc Blend Under Wide Range of Stress Triaxiality at Intermediate and High Strain Rates
Mae, Hiroyuki
JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 111 (02) : 854 - 868
[39] Influence of stress triaxiality on the failure behavior of Ti-6A1-4V alloy under a broad range of strain rates
Huang, Jia
Guo, Yazhou
Qin, Dongyang
Zhou, Zhanxuan
Li, Dongdong
Li, Yulong
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2018, 97 : 48 - 61
[40] Mechanical Behavior of Titanium Alloys under Different Conditions of Loading
Markovsky, Pavlo E.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 839 - 844

← 1 2 3 4 5 →