EFFECT OF POWDER TYPE ON STRUCTURE AND PROPERTIES OF CARBON BASED COATINGS

被引：0

作者：

Marcinauskas, L. ^{[1
,2
]}

Kezelis, R. ^{[1
]}

Kavaliauskas, Z. ^{[1
]}

Zunda, A. ^{[3
]}

Milieska, M. ^{[1
]}

机构：

[1] Lithuanian Energy Inst, Breslaujos 3, LT-44403 Kaunas, Lithuania

[2] Kaunas Univ Technol, Studentu 50, LT-51368 Kaunas, Lithuania

[3] Aleksandras Stulginskis Univ, Studentu 15, LT-53362 Akademija, Kaunas Distr, Lithuania

来源：

ROMANIAN JOURNAL OF PHYSICS | 2017年 / 62卷 / 5-6期

关键词：

Atmospheric plasma spraying; carbon composite; microstructure; microhardness; GRAPHITE OXIDE; ALUMINA COATINGS; PYROLYTIC CARBON; PLASMA; MICROSTRUCTURE; WEAR; CAPACITORS; RESISTANCE; PARTICLES; ELECTRODE;

D O I：

暂无

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

Carbon composite coatings were prepared using an atmospheric pressure plasma spraying on the steel substrate from different feedstock powders. The effect of the various powder types on the surface morphology and structure of the sprayed coatings was investigated. The prepared coatings surface morphology depends on the initial powder morphology and chemical composition. The coating sprayed from the P1 powder (wood waste) demonstrated the lowest surface roughness value. The oxygen concentration in the sprayed coatings increased. The highest oxidation was observed when the graphite flake-like powder (P4) were used. The C/O atomic ratio in the P3 coating (deposited using activated carbon powder), decreased 5.4 times, while the Cu concentration increased 2.4 times compared to the initial powder. The highest specific surface area (similar to 25.94 m(2)/g) and microhardness value (202 HV) were observed for the coating deposited using P1 powder.

引用

页数：13

共 50 条

[41] Effect of carbon on the structure and superconducting properties of Nb3Sn coatings produced by electrocodeposition
Kolosov, VN
INORGANIC MATERIALS, 2004, 40 (12) : 1287 - 1294
[42] Effect of structure and composition of solid carbon coatings of steel parts on the lubricating properties of synthetic oil
Buyanovskii, I. A.
Levchenko, V. A.
Bol'shakov, A. N.
Zelenskaya, M. N.
Ignatieva, Z. V.
Matveenko, V. N.
JOURNAL OF FRICTION AND WEAR, 2013, 34 (05) : 358 - 361
[43] EFFECT OF CARBON POWDER ON THE FLUID PROPERTIES OF PAM SOLUTION
Zhang, Meng
Zhang, Hong-Na
Li, Si-Ning
Li, Xiao-Bin
Li, Feng-Chen
PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE, 2016, VOL 1, 2016,
[44] Effect of powder morphology on the microstructure and properties of cold sprayed Ni coatings
Goral, A.
Zorawski, W.
Czaja, P.
Litynska-Dobrzynska, L.
Makrenek, M.
Kowalski, S.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (01) : 49 - 59
[45] Effect of medium on protective properties and adhesion of powder polyethylene coatings on steel
Panasyuk, VS
Prots, SR
Barinov, VY
MATERIALS SCIENCE, 1995, 31 (03) : 405 - 407
[46] Properties of inorganically pigmented powder coatings as a function of the type and surface pretreatment of the pigments
Thometzek, P.
Farbe und Lack, 1996, 102 (02):
[47] Effect of Iron Powder Type on Friction and Wear Properties of Copper-Based Friction Powder Metallurgy Material
Wu, Shen
Si, Qufan
Pan, Shengli
Liu, Jianxiu
Jiang, Aiyun
Fan, Jianglei
Li, Ying
Wang, Yan
TRIBOLOGY TRANSACTIONS, 2023, 66 (06) : 1019 - 1025
[48] Effect of CVD carbon coatings on properties of SiC fibres
Cao, S. Y.
Wang, J.
Wang, H.
SURFACE ENGINEERING, 2017, 33 (08) : 573 - 577
[49] Structure and properties of detonation coatings based on γ-TiN
Oliker, V.E.
Kresanov, V.S.
Poroshkovaya Metallurgiya, 2000, (11-12): : 82 - 88
[50] Structure and Properties of Detonation Coatings Based on γ-TiAl
Valerii E. Oliker
Powder Metallurgy and Metal Ceramics, 2000, 39 : 590 - 593

← 1 2 3 4 5 →