A feasibility study of ferro-boron as in-core shield material in fast breeder reactors

Shields around core and blankets form major part of reactor assembly in fast reactors as the incident neutron spectrum is hard with negligible thermal component and has anisotropic angular distribution. In this paper, a study is presented on the use of ferro-boron as neutron shield material in pool type fast reactors. The reference case chosen is the Prototype Fast Breeder Reactor (PFBR), a 500 MWe which is sodium cooled, pool type, mixed oxide (MOX) fuelled reactor, which is under construction at Kalpakkam, India. It is shown through 2D transport calculations, carried out using 175 neutron multigroup cross-sections, that this low cost material as shield is capable of satisfying the radiological safety criteria as well as the shields in the reference case. The secondary sodium activity and dose in steam generator building are marginally lower than the reference case. The total shield material weight will be lower by about 50 tonnes and the material cost lower by a factor 5 as compared to PFBR shields comprising of stainless steel and B(4)C. (C) 2010 Elsevier B.V. All rights reserved.