Effect of thermo-mechanical processing on microstructure and electrochemical behavior of Ti-Nb-Zr-V new metastable β titanium biomedical alloy

被引:18
|
作者
Mohammed, Mohsin Talib [1 ]
Khan, Zahid A. [2 ]
Geetha, M. [3 ]
机构
[1] Kufa Univ, Dept Mech Engn, Fac Engn, Najaf 54001, Iraq
[2] Jamia Millia Islamia, Dept Mech Engn, New Delhi 110025, India
[3] VIT Univ, Ctr Biomat Sci & Technol, Vellore 632014, Tamil Nadu, India
关键词
titanium alloy; thermo-mechanical processing; biomedical application; microstructure; electrochemical behavior; corrosion; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; PHASE-TRANSFORMATION; TI-13NB-13ZR; RESISTANCE; AT.PERCENT; TI-29NB-13TA-4.6ZR; CYTOTOXICITY; TI-6AL-4V; EVOLUTION;
D O I
10.1016/S1003-6326(15)63661-5
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The influence of thermo-mechanical processing (TMP) on the microstructure and the electrochemical behavior of new metastable beta alloy Ti-20.6Nb-13.6Zr-0.5V (TNZV) was investigated. The TMP included hot working in below beta transus, solution heat treatments at the same temperature and different cooling rates in addition to aging. Depending upon the TMP conditions, a wide range of microstructures with varying spatial distributions and morphologies of equiaxed/elongated alpha and beta phases were attained, allowing for a wide range of electrochemical properties to be achieved. The corrosion behavior of the studied alloy was evaluated in a Ringer's solution at 37 degrees C via open circuit potential-time and potentiodynamic polarization measurements.
引用
收藏
页码:759 / 769
页数:11
相关论文
共 50 条
  • [21] Dependence of mechanical behavior on grain size of metastable Ti–Nb–O titanium alloy
    Junshuai Wang
    Wenlong Xiao
    Yu Fu
    Lei Ren
    Chaoli Ma
    Progress in Natural Science:Materials International, 2022, 32 (01) : 63 - 71
  • [22] Effect of deformation processing on microstructure and mechanical properties of Ti-42Nb-7Zr alloy
    Eroshenko, Anna
    Legostaeva, Elena
    Glukhov, Ivan
    Uvarkin, Pavel
    Tolmachev, Alexey
    Luginin, Nikita
    Bataev, Vladimir
    Ivanov, Ivan
    Sharkeev, Yurii
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2022, 24 (04): : 206 - 218
  • [23] Finding an Optimal Thermo-Mechanical Processing Scheme for a Gum-Type Ti-Nb-Zr-Fe-O Alloy
    Nocivin, Anna
    Cojocaru, Vasile Danut
    Raducanu, Doina
    Cinca, Ion
    Angelescu, Maria Lucia
    Dan, Ioan
    Serban, Nicolae
    Cojocaru, Mirela
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (09) : 4373 - 4380
  • [24] Finding an Optimal Thermo-Mechanical Processing Scheme for a Gum-Type Ti-Nb-Zr-Fe-O Alloy
    Anna Nocivin
    Vasile Danut Cojocaru
    Doina Raducanu
    Ion Cinca
    Maria Lucia Angelescu
    Ioan Dan
    Nicolae Serban
    Mirela Cojocaru
    Journal of Materials Engineering and Performance, 2017, 26 : 4373 - 4380
  • [25] Effect of thermo-mechanical processing on microstructure and creep properties of the foils of alloy 617
    Sharma, S. K.
    Jang, C.
    Kang, K. J.
    JOURNAL OF NUCLEAR MATERIALS, 2009, 389 (03) : 420 - 426
  • [26] MECHANICAL BEHAVIOR OF A THERMO-MECHANICAL PROCESSED TI-25TA-5ZR BIOCOMPATIBLE ALLOY
    Vulcan, Andreea
    Cojocaru, Dan
    Raducanu, Doina
    Cinca, Ion
    Dumitrescu, Cristiana
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND SYSTEMS, 2010, : 227 - 232
  • [27] Tailoring the Microstructure and Mechanical Properties of Titanium Alloy Ti6Al4V Forgings with Different Combinations of Thermo-Mechanical Processing and Heat Treatment Cycles
    Pravendra Pratap Singh
    R. K. Gupta
    V. Anil Kumar
    Ravi C. Gundakaram
    Satish Kumar Singh
    Transactions of the Indian National Academy of Engineering, 2021, 6 (3) : 839 - 855
  • [28] Effect of Thermo-Mechanical Deformation on the Microstructure Evolution in a High Temperature Ti Alloy with Erbium
    Wang, Tongbo
    Li, Bolong
    Qiao, Xu
    Qi, Peng
    Nie, Zuoren
    HIGH PERFORMANCE STRUCTURAL MATERIALS, 2018, : 413 - 419
  • [29] Effect of Aging Temperature on Microstructure and Mechanical Properties of Ti-Nb-Ta-Zr-Fe Alloy for Biomedical Applications
    Xu, Y. F.
    Yi, D. Q.
    Liu, H. Q.
    Wang, B.
    Yang, F. L.
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL III, 2012, : 2126 - 2129
  • [30] Dependence of mechanical behavior on grain size of metastable Ti-Nb-O titanium alloy
    Wang, Junshuai
    Xiao, Wenlong
    Fu, Yu
    Ren, Lei
    Ma, Chaoli
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2022, 32 (01) : 63 - 71