A novel as-cast precipitation-strengthened Al0.5V0.1FeCrMnNi0.9 high-entropy alloy with high strength and plasticity

被引：5

作者：

Li ChunHui ^{[1
]}

Wang MingLiang ^{[1
]}

Zhang HuanZhi ^{[1
]}

Zhang GuoJia ^{[1
]}

Li TianXin ^{[1
]}

Lu YiPing ^{[1
]}

Li TingJu ^{[1
]}

机构：

[1] Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Solidificat Control & Digital Preparat Te, Dalian 116024, Peoples R China

来源：

SCIENCE CHINA-TECHNOLOGICAL SCIENCES | 2021年 / 64卷 / 09期

基金：

中国博士后科学基金;

关键词：

high-entropy alloy; microstructure; mechanical properties; precipitation strengthening; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; CORROSION-RESISTANCE; MICROSTRUCTURE; BEHAVIOR; DESIGN;

D O I：

10.1007/s11431-021-1866-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A novel Al0.5V0.1FeCrMnNi0.9 high-entropy alloy was designed to achieve enhanced strength and plasticity. The as-cast Al0.5V0.1FeCrMnNi0.9 alloy shows a typical dendritic microstructure consisting of a body-centered cubic-structured matrix phase and a B2-structured nanoprecipitate phase. Nanoprecipitates are homogeneous and dispersed in the matrix. The as-cast Al0.5V0.1FeCrMnNi0.9 alloy exhibits a compressive yield strength of 1.104 GPa, a fracture strength of 2.926 GPa, and a fracture strain of 45.7%. The product of strength and plasticity of this alloy is 133.72 GPa%, which is superior to that of most of the reported high-entropy alloys. The strengthening mechanisms were evaluated in detail, which indicates that the coherent precipitation enhancement contributes to the unusually high strength and plasticity.

引用

页码：1920 / 1926

页数：7

共 50 条

[21] Fully Recrystallized Al0.5CoCrFeNi High-Entropy Alloy Strengthened by Nanoscale Precipitates
Yang, Haoxue
Li, Jinshan
Guo, Tong
Wang, William Yi
Kou, Hongchao
Wang, Jun
METALS AND MATERIALS INTERNATIONAL, 2019, 25 (05) : 1145 - 1150
[22] Fully Recrystallized Al0.5CoCrFeNi High-Entropy Alloy Strengthened by Nanoscale Precipitates
Haoxue Yang
Jinshan Li
Tong Guo
William Yi Wang
Hongchao Kou
Jun Wang
Metals and Materials International, 2019, 25 : 1145 - 1150
[23] Enhancing the yield strength of Ni-Co-Cr-Fe-Al as-cast hypoeutectic high-entropy alloys by introducing γ′ precipitation
Jia, Yuhao
Wang, Zhijun
Wu, Qingfeng
He, Feng
Li, Junjie
Wang, Jincheng
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 858
[24] Effect of Al content on microstructure and mechanical properties of as-cast AlxFeMnNiCrCu0.5 high-entropy alloys
Thanhung Nguyen
Huang, Ming
Li, Hongjun
Hong, Lin
Yang, Sen
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 832
[25] Initial weldability study on Al0.5CrCoCu0.1FeNi high-entropy alloy
Martin, Alexander C.
Fink, Carolin
WELDING IN THE WORLD, 2019, 63 (03) : 739 - 750
[26] Initial weldability study on Al0.5CrCoCu0.1FeNi high-entropy alloy
Alexander C. Martin
Carolin Fink
Welding in the World, 2019, 63 : 739 - 750
[27] Enhanced radiation tolerance and plasticity in nanochannel Al0.1CoCrFeNi high-entropy alloy
Cheng, Tao
Qin, Wenjing
Wang, Hui
Cai, Guangxu
Jin, Suoxue
Wang, Yongqiang
Jiang, Changzhong
Ren, Feng
MATERIALS TODAY COMMUNICATIONS, 2023, 34
[28] Promoting strength-ductility synergy by mitigating heterogeneity in precipitation-strengthened FCC/B2 dual-phase high-entropy alloy
Jia, Yuhao
Wu, Qingfeng
He, Feng
Yang, Zhongsheng
Liu, Linxiang
Liu, Xin
Bai, Xiaoyu
Guo, Bojing
Kim, Hyoung Seop
Li, Junjie
Wang, Jincheng
Wang, Zhijun
INTERNATIONAL JOURNAL OF PLASTICITY, 2025, 184
[29] Room-Temperature Superformability in Novel As-Cast High-Entropy Alloy During Compressive Loading
Dutta, A.
Tung, Shu-Yi
Gupta, Saurabh Kumar
Tsai, Ming-Hung
Nene, Saurabh S. S.
ADVANCED ENGINEERING MATERIALS, 2023, 25 (08)
[30] Enhanced ductility via high-density nanoprecipitates driven by chemical supersaturation in a flash-heated precipitation-strengthened high-entropy alloy
Liu, Liyuan
Zhang, Yang
Rogozhkin, Sergey
Klauz, Artem
Li, Caiju
Li, Junpeng
Zhang, Zhongwu
ACTA MATERIALIA, 2024, 281

← 1 2 3 4 5 →