Finite element simulation of A-TIG welding of duplex stainless steel 2205 using SYSWELD

被引：8
|
作者：
Naik, K. Nanda [1 ]
Balasubramanian, K. R. [1 ]
Vasudevan, M. [2 ]
机构：
[1] Natl Inst Technol, Dept Mech Engn, Tiruchirappalli 620015, Tamil Nadu, India
[2] Indira Gandhi Ctr Atom Res, Met & Mat Grp, Mat Technol Div, Kalpakkam 603102, Tamil Nadu, India
来源：
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH | 2014年 / 592-594卷
关键词：
finite element analysis; A-TIG welding; temperature distribution; duplex stainless steel; weld bead profile; heat source; activated flux; DISTORTION;
D O I：
10.4028/www.scientific.net/AMM.592-594.374
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Bead on plate activated tungsten inert gas (A-TIG) welding of duplex stainless steel (DSS) 2205 was performed to determine the thermal history, temperature distribution and the weld bead geometry. Finite element (FE) simulations were carried out using the software, SYSWELD considering the temperature dependent thermal and mechanical properties of the base material. A 3D double ellipsoidal heat source was employed for the non-linear thermal analysis. The transient temperature distribution, weld bead profile, weld bead dimensions, depth of penetration and bead width were calculated by FE simulation. The simulated weld bead profile was compared with the experimentally measured profile and found to be in agreement.
引用
收藏
页码：374 / +
页数：3
相关论文
共 50 条
  • [31] Study on Welding Parameters Optimization of Duplex Stainless Steel 2205 Based on Orthogonal
    Wang, Zhenglun
    Wang, Zhixiang
    Zhang, Yu
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 1305 - +
  • [32] Studies on the Parametric Effects of Plasma Arc Welding of 2205 Duplex Stainless Steel
    Bharathi, R. Selva
    Shanmugam, N. Siva
    Kannan, R. Murali
    Vendan, S. Arungalai
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2018, 37 (03) : 219 - 232
  • [33] Performance of weld bead profile during A-TIG welding on nitrogen alloyed stainless steel
    Deep, Akash
    Singh, Vivek
    Ashutosh, Som
    Chandrasekaran, M.
    Patel, Dixit
    ENGINEERING RESEARCH EXPRESS, 2021, 3 (04):
  • [34] INFLUENCE OF PARAMETERS OF LASER BEAM WELDING ON STRUCTURE OF 2205 DUPLEX STAINLESS STEEL
    Landowski, M.
    ADVANCES IN MATERIALS SCIENCE, 2019, 19 (01): : 21 - 31
  • [35] Laser beam welding of 2205 duplex stainless steel with metal powder additions
    Wu, HC
    Tsay, LW
    Chen, C
    ISIJ INTERNATIONAL, 2004, 44 (10) : 1720 - 1726
  • [36] The microstructure and impact toughness of simulated welding HAZ in 2205 duplex stainless steel
    Zhang Jianxun
    Li Qingyan
    Li Weiwei
    Zhang Tianhong
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (11) : 1822 - 1825
  • [37] Influence of M-TIG and A-TIG Welding Process on Microstructure and Mechanical Behavior of 409 Ferritic Stainless Steel
    R. S. Vidyarthy
    D. K. Dwivedi
    M. Vasudevan
    Journal of Materials Engineering and Performance, 2017, 26 : 1391 - 1403
  • [38] Simulation on Variable Thickness Rolling Process of 2205 Duplex Stainless Steel
    Ji Y.-F.
    Niu J.
    Wang X.-J.
    Sun J.
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2022, 43 (08): : 1097 - 1104+1133
  • [39] Evaluation of a duplex stainless steel coating deposited on a carbon steel by the TIG welding process
    Xavier, CR
    Baptista, ALB
    Vieira, LCA
    Luiz, EL
    Ribas, PRF
    ELEVATED TEMPERATURE COATINGS: SCIENCE AND TECHNOLOGY III, 1999, : 243 - 251
  • [40] Influence of M-TIG and A-TIG Welding Process on Microstructure and Mechanical Behavior of 409 Ferritic Stainless Steel
    Vidyarthy, R. S.
    Dwivedi, D. K.
    Vasudevan, M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (03) : 1391 - 1403
12345