Experimental study on gearbox oil blended with composite additives

被引：0
|
作者：
Kamble, Dinesh N. [1 ]
Gadekar, Tushar D. [1 ]
Agrawal, Devendra P. [2 ]
机构：
[1] Vishwakarma Inst Informat Technol Pune, Mech Engn, Pune, India
[2] SVPM Coll Engn Malegaon, Mech Engn, Malegaon, India
来源：
JURNAL TRIBOLOGI | 2022年 / 33卷
关键词：
Composite additives; Gear box oil; Friction; Wear; TRIBOLOGICAL PROPERTIES; FRICTION REDUCTION; CU NANOPARTICLES; IONIC LIQUIDS; BEHAVIOR; WEAR; PERFORMANCE;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Friction and wear in moving kinematic links is a crucial cause for energy drop in a gearbox system. It can be governed by consuming modified lubricants or investigating the influence of additives on existing oil. The tribological performance of wind turbine Gearbox has unfavorably influenced by aspects such as nature of loading, type of oil and speed, etc. This paper presents an experimental investigation on oil mixed with Al2O3/ZrO2/SiO2 Nanocomposites in combination with Zinc DialkylDithio Phosphate for various conditions. The process variable levels for the four-ball tribometer are designed for concentration in the percentage of weight as 0.005, 0.01, and 0.02. Experimentation on a Fourball tester is performed to determine wear scar dia. and friction coefficient. It is observed that the addition of composite additives in combination with ZDDP reduces COF and wear scar diameter by 1.4 % and 13.4 % individually.
引用
收藏
页码：1 / 19
页数：19
相关论文
共 50 条
  • [21] Misalignment effect on gearbox failure: An experimental study
    Kumar, Paras
    Hirani, Harish
    MEASUREMENT, 2021, 169
  • [22] Theoretical and experimental study on fault diagnosis of gearbox
    Yang, P
    Yam, LH
    INTEGRATING DYNAMICS, CONDITION MONITORING AND CONTROL FOR THE 21ST CENTURY - DYMAC 99, 1999, : 117 - 121
  • [23] Operating-conservation motor oil with composite additives
    Palichev, T.
    Kramis, F. S.
    Petkov, P.
    OXIDATION COMMUNICATIONS, 2008, 31 (01): : 223 - 230
  • [24] Experimental Investigation to Enhance the Performance of High Speed Reduction Gearbox using Nano Blended Lubricants
    Rao, Isai Dharma
    Prasad, C. L. V. R. S. V.
    Santarao, K.
    JOURNAL OF SURFACE SCIENCE AND TECHNOLOGY, 2018, 34 (3-4) : 87 - 97
  • [25] Experimental Investigation on DICI Engine by Using Chemical and Nano Additives Blended Biodiesel
    Arun, R.
    Rao, Srinivasa M.
    Prabu, A.
    Anand, R. B.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 1575 - +
  • [26] Experimental study of effects of oil additives into coefficient of friction in journal bearings at different temperatures
    Durak, Ertugrul
    Kurbanoglu, Cahit
    Tunay, Recai Fatih
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2006, 58 (06) : 288 - 294
  • [27] Experimental investigation on DICI engine by using chemical and nano additives blended biodiesel
    Arun, R.
    Rao, Srinivasa M.
    Prabu, A.
    Anand, R.B.
    Applied Mechanics and Materials, 2014, 592-594 : 1575 - 1579
  • [28] Experimental Study on the Mechanical Properties of Green Lightweight Cement Composite Modified by Nano Additives
    Du, Yiying
    Korjakins, Aleksandrs
    ENVIRONMENTAL AND CLIMATE TECHNOLOGIES, 2023, 27 (01) : 878 - 888
  • [29] Experimental Study on Combustion Characteristics of Jatropha Oil/ RP-3 Kerosene Blended Fuel
    Wu Z.-L.
    Ma H.-A.
    Fu S.-Q.
    Liu Y.
    Zeng W.
    Tuijin Jishu/Journal of Propulsion Technology, 2019, 40 (10): : 2358 - 2365
  • [30] Experimental Study on Co-Combustion of Oil Sludge Pyrolysis Char Blended With Microalgae Residues
    Wang, Zhentong
    Gong, Zhiqiang
    Wang, Zhenbo
    Fang, Peiwen
    Meng, Fanzhi
    Han, Dong
    Shiyou Xuebao, Shiyou Jiagong/Acta Petrolei Sinica (Petroleum Processing Section), 2019, 35 (04): : 818 - 824
12345