Combined cyclic deformation and artificial ageing of an Al-Mg-Si alloy

被引：2
|
作者：
Oesterreicher, Johannes A. [1 ]
机构：
[1] Austrian Inst Technol, LKR Light Met Technol, A-5282 Ranshofen, Austria
来源：
MATERIALS LETTERS-X | 2021年 / 10卷
关键词：
Cyclic strengthening; Ageing kinetics; Hardening behavior; Precipitation; Aluminum alloys; Strain; ALUMINUM-ALLOY; HARDENING RESPONSE; BEHAVIOR; STRAIN; CU;
D O I：
10.1016/j.mlblux.2021.100072
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Room-temperature cyclic deformation of age-hardenable alloys can produce similar strength as artificial ageing in much shorter time, but industrial applicability is limited due to the high number of required cycles. As an alternative, fewer cyclic deformation steps can be combined with traditional artificial ageing: Introducing a small plastic deformation step every ten minutes during artificial ageing of AA6060 at 160 degrees C reduces ageing time up to a factor of nine, resulting in comparable yield strength yet slightly reduced ultimate tensile strength. (C) 2021 The Author(s). Published by Elsevier B.V.
引用
收藏
页数：3
相关论文
共 50 条
  • [21] Influence of cold deformation on the aging behavior of the Al-Mg-Si alloy
    Aouabdia, Y.
    Amiour, L.
    Boubertakh, A.
    JOURNAL OF NEW TECHNOLOGY AND MATERIALS, 2019, 9 (02) : 28 - 34
  • [22] The Effect of Preaging Deformation on the Precipitation Behavior of an Al-Mg-Si Alloy
    Teichmann, Katharina
    Marioara, Calin D.
    Andersen, Sigmund J.
    Marthinsen, Knut
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (11): : 4006 - 4014
  • [23] The Effect of Preaging Deformation on the Precipitation Behavior of an Al-Mg-Si Alloy
    Katharina Teichmann
    Calin D. Marioara
    Sigmund J. Andersen
    Knut Marthinsen
    Metallurgical and Materials Transactions A, 2012, 43 : 4006 - 4014
  • [24] Large strain deformation textures and microstructures of an Al-Mg-Si alloy
    Chovet, C
    Gourdet, S
    Montheillet, F
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 733 - 738
  • [25] The effect of cold deformation on the kinetics of the β" precipitates in an Al-Mg-Si alloy
    Yassar, RS
    Field, DP
    Weiland, H
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (08): : 2059 - 2065
  • [26] The fracture behavior of an Al-Mg-Si alloy during cyclic fatigue
    Azzam, Diya
    Menzemer, Craig C.
    Srivatsan, T. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (20): : 5341 - 5345
  • [27] Deformation and recrystallisation behaviour of a homogenised and a heterogenised Al-Mg-Si alloy
    Morgenstern, R.
    Videm, M.
    Marthinsen, K.
    Nes, E.
    Furu, T.
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 1611 - 1616
  • [28] EFFECT OF PLASTIC DEFORMATION ON THE PRECIPITATION IN AN Al-Mg-Si ALLOY.
    Hirata, Toshiya
    Matsuo, Shigeru
    Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 1972, 36 (12): : 1159 - 1163
  • [29] STRAIN DISTRIBUTION DURING INHOMOGENEOUS DEFORMATION IN AN AL-MG-SI ALLOY
    MUNZ, D
    SCRIPTA METALLURGICA, 1974, 8 (04): : 393 - 400
  • [30] Effects of Sn/In additions on natural and artificial ageing of Al-Mg-Si alloys
    Cheng, Tao
    Jia, Zhihong
    Weng, Yaoyao
    Hao, Longlong
    Liu, Qing
    MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34 (17) : 2136 - 2144
12345