Change in surface morphology of polytetrafluoroethylene by reactive ion etching

被引：23

作者：

Takahashi, Tomohiro ^{[1
]}

Hirano, Yuki ^{[1
]}

Takasawa, Yuya ^{[1
]}

Gowa, Tomoko ^{[1
]}

Fukutake, Naoyuki ^{[1
]}

Oshima, Akihiro ^{[2
]}

Tagawa, Seiichi ^{[1
,2
]}

Washio, Masakazu ^{[1
]}

机构：

[1] Waseda Univ, Res Inst Sci & Engn, Shinjuku Ku, Tokyo 1698555, Japan

[2] Osaka Univ, Inst Sci & Ind Res, Osaka 5670047, Japan

来源：

RADIATION PHYSICS AND CHEMISTRY | 2011年 / 80卷 / 02期

关键词：

Plasma; PTFE; Reactive ion etching; Water repellency;

D O I：

10.1016/j.radphyschem.2010.07.042

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Polytetrafluoroethylene (PTFE) was exposed to Ar, CF4, N-2 and O-2 plasmas using a reactive ion etching facility. After the exposure, the change in the surface morphology of PTFE was examined and characterization studies were performed for the etching rate, surface roughness, radical yields, chemical structures, water repellency and so on. The etching rates of Ar, CF4, N-2 and O-2 plasmas were 0.58, 7.2, 4.4 and 17 mu m/h, respectively. It was observed that needle-like nano-fiber structures on the surface were irregularly fabricated by the CF4 plasma. In addition, when the water repellency of exposed samples was evaluated by contact angle, they showed super-hydrophobic properties: contact angle over 150 degrees. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.

引用

页码：253 / 256

页数：4

共 50 条

[31] Reactive ion etching and ion beam etching for ferroelectric memories
Shao, TQ
Ren, TL
Liu, LT
Zhu, J
Li, ZJ
INTEGRATED FERROELECTRICS, 2004, 61 : 213 - 220
[32] MICROWAVE ETCHING DEVICE FOR REACTIVE ION ETCHING
SCHMID, H
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 139 : 408 - 411
[33] MEV HELIUM ION-BEAM ETCHING OF POLYTETRAFLUOROETHYLENE
TORRISI, L
CALCAGNO, L
FOTI, AM
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1988, 32 (1-4): : 142 - 144
[34] Dry etching of GaN using reactive ion beam etching and chemically assisted reactive ion beam etching
Lee, JW
Park, HS
Park, YJ
Yoo, MC
Kim, TI
Kim, HS
Yeom, GY
GALLIUM NITRIDE AND RELATED MATERIALS II, 1997, 468 : 373 - 377
[35] Effect of process parameters on the surface morphology and mechanical performance of silicon structures after deep reactive ion etching (DRIE)
Chen, KS
Ayón, AA
Zhang, X
Spearing, SM
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2002, 11 (03) : 264 - 275
[36] INVESTIGATION OF GAAS SURFACE-MORPHOLOGY INDUCED BY CL2 GAS REACTIVE ION-BEAM ETCHING
SUGATA, S
ASAKAWA, K
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1983, 22 (12): : L813 - L814
[37] REACTIVE ION ETCHING.
Gorowitz, Bernard
Saia, Richard J.
VLSI Electronics, Microstructure Science, 1984, 8 : 297 - 339
[38] REACTIVE-ION ETCHING
OEHRLEIN, GS
PHYSICS TODAY, 1986, 39 (10) : 26 - 33
[39] REACTIVE ION ETCHING OF DIAMOND
SANDHU, GS
CHU, WK
APPLIED PHYSICS LETTERS, 1989, 55 (05) : 437 - 438
[40] REACTIVE ION ETCHING WITH THE FLUOROCHLOROMETHANES
HO, YS
BOBBIO, SM
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1986, 133 (08) : C311 - C311

← 1 2 3 4 5 →