Theoretical investigation of properties of InAsSb mid-wave infrared detectors

被引:0
|
作者
Gomolka, Emilia [1 ]
Kopytko, Malgorzata [1 ]
Martyniuk, Piotr [1 ]
机构
[1] Mil Univ Technol, Inst Appl Phys, 2 Urbanowicza Str, PL-00908 Warsaw, Poland
关键词
Infrared detector; Barrier detector; High-operating temperature;
D O I
10.1117/12.2503626
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
In this work we present the theoretical investigation of the electrical and optical properties of high operating temperature (HOT) mid-wavelength infrared detectors (5 m at 230 K) based on InAsSb/AlSb heterostructures [1]. In this work the performance comparison of barrier detectors with different doping concentration of n-type absorbing layer is presented. The barrier structure was simulated by commercially available software APSYS. We report on the dependence of the calculated current responsivity on the active layer thickness for a different doping concentration and doping concentration for optimal absorber thickness. Moreover, we show the influence of the bottom contact material on device's performance.
引用
收藏
页数:5
相关论文
共 50 条
  • [1] InGaAs/InAsSb strained layer superlattices for mid-wave infrared detectors
    Ariyawansa, Gamini
    Reyner, Charles J.
    Steenbergen, Elizabeth H.
    Duran, Joshua M.
    Reding, Joshua D.
    Scheihing, John E.
    Bourassa, Henry R.
    Liang, Baolai L.
    Huffaker, Diana L.
    APPLIED PHYSICS LETTERS, 2016, 108 (02)
  • [2] Proton irradiation effects on InGaAs/InAsSb mid-wave barrier infrared detectors
    Carrasco, Rigo A.
    George, James
    Maestas, Diana
    Alsaad, Zinah M.
    Garnham, David
    Morath, Christian P.
    Duran, Joshua M.
    Ariyawansa, Gamini
    Webster, Preston T.
    JOURNAL OF APPLIED PHYSICS, 2021, 130 (11)
  • [3] Simulation on the saturation properties of HgCdTe mid-wave infrared detectors
    Li Xiang-Yang
    Sang Mao-Sheng
    Xu Guo-Qing
    Qiao Hui
    Chu Kai-Hui
    Yang Xiao-yang
    Yang Peng-Ling
    Wang Da-Hui
    JOURNAL OF INFRARED AND MILLIMETER WAVES, 2023, 42 (02) : 143 - 148
  • [4] Study of the Effectiveness of Anodic Films as Surface Passivation for InAsSb Mid-Wave Infrared HOT Detectors
    Michalczewski, K.
    Gomolka, E.
    Ciosek, J.
    Kubiszyn, L.
    Benyahia, D.
    Lipski, K.
    Martyniuk, P.
    Piotrowski, J.
    Rogalski, A.
    ACTA PHYSICA POLONICA A, 2018, 134 (04) : 981 - 984
  • [5] High Temperature Mid-Wave Infrared InAsSb Barrier Photodetectors
    Xue, Ting
    Huang, Jianliang
    Zhang, Yanhua
    Ma, Wenquan
    IEEE JOURNAL OF QUANTUM ELECTRONICS, 2024, 60 (02) : 1 - 4
  • [6] Comparison of type II superlattice InAs/InAsSb barrier detectors operating in the mid-wave infrared range
    Kopytko, Malgorzata
    Madejczyk, Pawel
    Murawski, Krzysztof
    Kubiszyn, Lukasz
    Michalczewski, Krystian
    Seredynski, Bartlomiej
    Szlachetko, Kamil
    Jurenczyk, Jaroslaw
    Gawron, Waldemar
    Rutkowski, Jaroslaw
    JOURNAL OF APPLIED PHYSICS, 2024, 136 (01)
  • [7] Theoretical Modeling of HOT HgCdTe Barrier Detectors for the Mid-Wave Infrared Range
    P. Martyniuk
    W. Gawron
    A. Rogalski
    Journal of Electronic Materials, 2013, 42 : 3309 - 3319
  • [8] Dark current reduction in InAs/InAsSb superlattice mid-wave infrared detectors through restoration etch
    Plis, E. A.
    Schuler-Sandy, T.
    Ramirez, D. A.
    Myers, S.
    Krishna, S.
    ELECTRONICS LETTERS, 2015, 51 (24) : 2009 - +
  • [9] Theoretical Modeling of HOT HgCdTe Barrier Detectors for the Mid-Wave Infrared Range
    Martyniuk, P.
    Gawron, W.
    Rogalski, A.
    JOURNAL OF ELECTRONIC MATERIALS, 2013, 42 (11) : 3309 - 3319
  • [10] InAsSb-based detectors on GaSb for near-room-temperature operation in the mid-wave infrared
    Craig, A. P.
    Letka, V
    Carmichael, M.
    Golding, T.
    Marshall, A. R.
    APPLIED PHYSICS LETTERS, 2021, 118 (25)