Optimization of a phase change material wallboard for building use

被引：212
|
作者：
Kuznik, Frederic [1 ]
Virgone, Joseph [1 ]
Noel, Jean [2 ]
机构：
[1] Univ Lyon 1, INSA Lyon, CNRS, Thermal Sci Ctr Lyon,UMR 5008, F-69621 Villeurbanne, France
[2] Free Lance Sci Software Developer, F-69002 Lyon, France
来源：
APPLIED THERMAL ENGINEERING | 2008年 / 28卷 / 11-12期
关键词：
optimization; phase change material; wallboard; energy storage; thermal flow;
D O I：
10.1016/j.applthermaleng.2007.10.012
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In construction, the use of phase change materials (PCM) allows the storage/release of energy from the solar radiation and/or internal loads. The application of such materials for lightweight construction (e.g., a wood house) makes it possible to improve thermal comfort and reduce energy consumption. A wallboard composed of a new PCM material is investigated in this paper to enhance the thermal behavior of a lightweight internal partition wall. The paper focuses on the optimization of phase change material thickness. The in-house software CODYMUR is used to optimize the PCM wallboard by the means of numerical simulations. The results show that an optimal PCM thickness exists. The optimal PCM thickness value is then calculated for use in construction. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1291 / 1298
页数：8
相关论文
共 50 条
  • [21] Optimization of Phase Change Material Properties for Enhanced Thermal Performance in Building Envelopes
    Jasurjon Akbar Halimov
    Zafar Akhatov
    undefined Iskandarov
    Applied Solar Energy, 2024, 60 (4) : 636 - 648
  • [22] Experimental investigation of wallboard containing phase change material: Data for validation of numerical modeling
    Kuznik, F.
    Virgone, J.
    ENERGY AND BUILDINGS, 2009, 41 (05) : 561 - 570
  • [23] Experimental thermal performance of wallboard with hybrid microencapsulated phase change materials for building application
    Li, Chaoen
    Yu, Hang
    Song, Yuan
    Tang, Yin
    Chen, Pengda
    Hu, Huixin
    Wang, Meng
    Liu, Zhiyuan
    JOURNAL OF BUILDING ENGINEERING, 2020, 28
  • [24] A review on phase change material application in building
    Cui, Yaping
    Xie, Jingchao
    Liu, Jiaping
    Wang, Jianping
    Chen, Shuqin
    ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (06)
  • [25] Energy saving potential of a novel phase change material wallboard in typical climate regions of China
    Zhu, Na
    Liu, Fuli
    Liu, Pengpeng
    Hu, Pingfang
    Wu, Mengdu
    ENERGY AND BUILDINGS, 2016, 128 : 360 - 369
  • [26] Phase Change Material Wallboard (PCMW) melting temperature optimisation for passive indoor temperature control
    Zhou, Dan
    Eames, Philip
    RENEWABLE ENERGY, 2019, 139 : 507 - 514
  • [27] Energy consumption of a building with phase change material walls-The effect of phase change material properties
    Imafidon, Oselen J.
    Ting, David S. -K.
    JOURNAL OF ENERGY STORAGE, 2022, 52
  • [28] Micro-/macro-level optimization of phase change material panel in building envelope
    Liu, Yan
    Wang, Mengyuan
    Cui, Hongzhi
    Yang, Liu
    Liu, Jiaping
    ENERGY, 2020, 195 (195)
  • [29] Numerical and experimental research of cold storage for a novel expanded perlite-based shape-stabilized phase change material wallboard used in building
    Yao, Chengqiang
    Kong, Xiangfei
    Li, Yantong
    Du, Yaxing
    Qia, Chengying
    ENERGY CONVERSION AND MANAGEMENT, 2018, 155 : 20 - 31
  • [30] Reduced-scale experiments on the thermal performance of phase change material wallboard in different climate conditions
    Qiao, Yuhao
    Yang, Liu
    Bao, Jiayang
    Liu, Yan
    Liu, Jiaping
    BUILDING AND ENVIRONMENT, 2019, 160
12345