Optimization of a phase change material wallboard for building use

被引：212
|
作者：
Kuznik, Frederic [1 ]
Virgone, Joseph [1 ]
Noel, Jean [2 ]
机构：
[1] Univ Lyon 1, INSA Lyon, CNRS, Thermal Sci Ctr Lyon,UMR 5008, F-69621 Villeurbanne, France
[2] Free Lance Sci Software Developer, F-69002 Lyon, France
来源：
APPLIED THERMAL ENGINEERING | 2008年 / 28卷 / 11-12期
关键词：
optimization; phase change material; wallboard; energy storage; thermal flow;
D O I：
10.1016/j.applthermaleng.2007.10.012
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In construction, the use of phase change materials (PCM) allows the storage/release of energy from the solar radiation and/or internal loads. The application of such materials for lightweight construction (e.g., a wood house) makes it possible to improve thermal comfort and reduce energy consumption. A wallboard composed of a new PCM material is investigated in this paper to enhance the thermal behavior of a lightweight internal partition wall. The paper focuses on the optimization of phase change material thickness. The in-house software CODYMUR is used to optimize the PCM wallboard by the means of numerical simulations. The results show that an optimal PCM thickness exists. The optimal PCM thickness value is then calculated for use in construction. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1291 / 1298
页数：8
相关论文
共 50 条
  • [1] An improved heat transfer model for building phase change material wallboard
    Jin, Xing
    Hu, Huoyan
    Shi, Xing
    Zhou, Xin
    Yang, Liu
    Yin, Yonggao
    Zhang, Xiaosong
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2018, 134 (03) : 1757 - 1763
  • [2] An improved heat transfer model for building phase change material wallboard
    Xing Jin
    Huoyan Hu
    Xing Shi
    Xin Zhou
    Liu Yang
    Yonggao Yin
    Xiaosong Zhang
    Journal of Thermal Analysis and Calorimetry, 2018, 134 : 1757 - 1763
  • [3] NUMERICAL SIMULATION OF PHASE CHANGE MATERIAL COMPOSITE WALLBOARD IN A MULTI-LAYERED BUILDING ENVELOPE
    Zwanzig, Stephen D.
    Lian, Yongsheng
    Brehob, Ellen G.
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 6, PTS A AND B, 2013, : 1143 - 1157
  • [4] OBTAINING AN ENERGY STORING BUILDING MATERIAL BY DIRECT INCORPORATION OF AN ORGANIC-PHASE CHANGE MATERIAL IN GYPSUM WALLBOARD
    FELDMAN, D
    BANU, D
    HAWES, D
    GHANBARI, E
    SOLAR ENERGY MATERIALS, 1991, 22 (2-3): : 231 - 242
  • [5] Numerical simulation of phase change material composite wallboard in a multi-layered building envelope
    Zwanzig, Stephen D.
    Lian, Yongsheng
    Brehob, Ellen G.
    ENERGY CONVERSION AND MANAGEMENT, 2013, 69 : 27 - 40
  • [6] Study on optimization of thermal property parameters of phase change wallboard and its application simulation in the building
    Zhao, Qing
    Shi, Chen
    Yang, Liu
    JOURNAL OF ENERGY STORAGE, 2023, 61
  • [7] Review on optimization of phase change parameters in phase change material building envelopes
    Cai, Ruonan
    Sun, Zhigao
    Yu, Hang
    Meng, Erlin
    Wang, Junqi
    Dai, Mengling
    JOURNAL OF BUILDING ENGINEERING, 2021, 35
  • [8] THE THERMAL PERFORMANCE OF SHAPE-STABILIZED PHASE CHANGE MATERIAL OF WALLBOARD APPLIED IN THE NORTHERN RESIDENTIAL BUILDING
    Chen, Zhanxiu
    Chen, Guanyi
    FIFTH INTERNATIONAL WORKSHOP ON ENERGY AND ENVIRONMENT OF RESIDENTIAL BUILDINGS AND THIRD INTERNATIONAL CONFERENCE ON BUILT ENVIRONMENT AND PUBLIC HEALTH, VOL I AND II, PROCEEDINGS, 2009, : 1432 - 1440
  • [9] In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard
    Kuznik, Frederic
    Virgone, Joseph
    Johannes, Kevyn
    RENEWABLE ENERGY, 2011, 36 (05) : 1458 - 1462
  • [10] Development and thermal performance of an expanded perlite-based phase change material wallboard for passive cooling in building
    Kong, Xiangfei
    Yao, Chengqiang
    Jie, Pengfei
    Liu, Yun
    Qi, Chengying
    Rong, Xian
    ENERGY AND BUILDINGS, 2017, 152 : 547 - 557
12345