A MEMS Based Measurement System for Structure Health Monitoring Applications

被引：0
|
作者：
Majcherek, Soeren [1 ]
Hirsch, Soeren [1 ]
Schmidt, Bertram [2 ]
机构：
[1] Otto VonGuericke Univ Magdegurg, TEPROSA, Post Box 4120, D-39016 Magdeburg, Germany
[2] Otto von Guericke Univ Magdeburg IMOS, D-39016 Magdeburg, Germany
来源：
HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2010, PTS 1 AND 2 | 2010年 / 7650卷
关键词：
MEMS; experimental stress analysis; piezo resistive;
D O I：
10.1117/12.846736
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
The structure health monitoring becomes more and more important to increase the reliability of important assemblies and structures. Therefore, a silicon test chip was developed to analyse acting mechanical loads at critical structure locations. Standard MEMS technologies are used for manufacturing an array structure of stress sensitive elements. Up to 16 sections with each 6 stress sensitive resistors can be measured continuously by one measurement hardware unit. Interpretation and correction of the measured raw data is performed in proper computer software. The whole system can be utilized as a self-sufficient measurement chain for structure health monitoring.
引用
收藏
页数：9
相关论文
共 50 条
  • [11] MEMS based Inertial Measurement Units For strategic applications
    Chatterjee, Gaurav
    Latorre, Laurent
    Mailly, Frederick
    Nouet, Pascal
    Hachelef, Nacim
    Oudea, Coumar
    2015 SYMPOSIUM ON DESIGN, TEST, INTEGRATION AND PACKAGING OF MEMS/MOEMS (DTIP), 2015,
  • [12] MEMS based sensor system for environmental monitoring
    Daly, JT
    Johnson, EA
    Moelders, N
    McNeal, M
    Pralle, M
    Greenwald, AC
    Ho, B
    Puscasu, I
    George, T
    Choi, DS
    ADVANCED ENVIRONMENTAL SENSING TECHNOLOGY II, 2002, 4576 : 49 - 55
  • [13] Scalable and low-cost MEMS-based Structural Health Monitoring System
    Izquierdo, Alberto
    Villacorta, Juan J.
    del Val, Lara
    Magdaleno, Alvaro
    6TH INTERNATIONAL CONFERENCE ON MECHANICAL MODELS IN STRUCTURAL ENGINEERING, CMMOST 2021, 2 EDITION, 2022, : 2 - 16
  • [14] EVENT-BASED DISTRIBUTED MEASUREMENT SYSTEM FOR PQ MONITORING APPLICATIONS
    Ciancetta, Fabrizio
    Fiorucci, Edoardo
    Bucci, Giovanni
    Landi, Carmine
    XIX IMEKO WORLD CONGRESS: FUNDAMENTAL AND APPLIED METROLOGY, PROCEEDINGS, 2009, : 757 - 762
  • [15] An innovative measurement system based on MEMs for telerehabilitation
    Andria, G.
    Lanzolla, A. M. L.
    Russo, G.
    Parabita, M.
    Incalzi, R. Antonelli
    Cavallo, G.
    Benvenuto, M.
    2015 IEEE INTERNATIONAL SYMPOSIUM ON MEDICAL MEASUREMENTS AND APPLICATIONS (MEMEA) PROCEEDINGS, 2015, : 436 - 439
  • [16] Intelligent Data Acquisition System for MEMS Vibration Monitoring Applications
    Wu, Tsung-Hsun
    Sue, Chung-Yang
    Chen, Pei-Yin
    2018 13TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2018, : 252 - 255
  • [17] Mems-Based Sensing for Health Monitoring of Buildings
    Guidorzi, R.
    Diversi, R.
    Vincenzi, L.
    Simioli, V.
    STRUCTURAL HEALTH MONITORING 2010, 2010, : 901 - 906
  • [18] Structure health monitoring system based on virtual instrument and network
    Du, Yanliang
    Gao, Zhanfeng
    Yan, Yan
    Su, Mubiao
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON HEALTH MONITORING OF STRUCTURE, MATERIALS AND ENVIRONMENT, VOLS 1 AND 2, 2007, : 240 - +
  • [19] Subway structure health monitoring system based on internet of things
    Li, Zhao-qi
    Zhang, Jian-hua
    Dong, Jie
    STRUCTURES, 2024, 61
  • [20] Development of a wireless MEMS inertial system for health monitoring of structures
    Kok, R
    Furlong, C
    Pryputniewicz, RJ
    MATERIALS AND DEVICES FOR SMART SYSTEMS, 2004, 785 : 395 - 400
12345