Influence of design on mixing efficiency in the kneading disc region of co-rotating twin screw extruders

被引：6

作者：

Manas-Zloczower, I ^{[1
]}

Cheng, HF ^{[1
]}

机构：

[1] Case Western Reserve Univ, Dept Macromol Sci, Cleveland, OH 44106 USA

来源：

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES | 1998年 / 17卷 / 12期

关键词：

twin screw extruders; kneading discs; flow simulations; dispersive mixing;

D O I：

10.1177/073168449801701202

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Co-rotating, intermeshing twin screw extruders are widely used in polymer compounding and blending. In this work, a fluid dynamics analysis package-FIDAP, using the finite element method was employed to simulate the isothermal flow patterns of a non-Newtonial fluid in the kneading disc region of Werner & Pfleiderer ZSK-30 and ZSK-53 co-rotating twin screw extruders. Dispersive mixing efficiency was analyzed in terms of shear stresses generated and elongational flow characteristics. The influence of design variables (2 lobes versus 3 lobes discs) on the pumping characteristics and dispersive mixing efficiency is discussed.

引用

页码：1076 / 1086

页数：11

共 50 条

[31] Melting of homopolymers in co-rotating, intermeshing twin-screw extruders
Busby, F
McCullough, TW
Hughes, KR
Kirk, RO
ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 3571 - 3576
[32] STARVE-FED FLOW IN CO-ROTATING TWIN SCREW EXTRUDERS
BIGIO, D
CASSIDY, K
DELLAPA, M
BAIM, W
INTERNATIONAL POLYMER PROCESSING, 1992, 7 (02) : 111 - 115
[33] Method for the optimisation of screw elements for tightly intermeshing, co-rotating twin screw extruders
Potente, H
Thümen, A
INTERNATIONAL POLYMER PROCESSING, 2006, 21 (02) : 149 - 154
[34] Experimental analysis of the kneading disk region in a co-rotating twin screw extruder .1. Flow characteristics of the kneading disk region
Shimizu, Y
Arai, S
Itoyama, T
Kawamoto, H
ADVANCES IN POLYMER TECHNOLOGY, 1996, 15 (04) : 307 - 314
[35] Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co-rotating twin-screw extruders
Bravo, VL
Hrymak, AN
Wright, JD
POLYMER ENGINEERING AND SCIENCE, 2004, 44 (04): : 779 - 793
[36] Melt Conveying in Co-rotating Twin Screw Extruders Experiment and Numerical Simulation
Mours, M.
Reinelt, D.
Wagner, H-G
Gilbert, N.
Hofmann, J.
INTERNATIONAL POLYMER PROCESSING, 2022, 15 (02) : 124 - 132
[37] Sigma -: A simulation tool for tightly intermeshing, co-rotating twin screw extruders
Potente, Helmut
Thuemen, Anne
WMSCI 2005: 9th World Multi-Conference on Systemics, Cybernetics and Informatics, Vol 6, 2005, : 261 - 266
[38] RESIDENCE TIME CHARACTERISTICS OF TIGHTLY INTERMESHING CO-ROTATING TWIN SCREW EXTRUDERS
POTENTE, H
ANSAHL, J
KUNSTSTOFFE-GERMAN PLASTICS, 1990, 80 (08): : 926 - 932
[39] Conveying behaviour of closely intermeshing, co-rotating, twin-screw extruders
Michaeli, W.
Grefenstein, A.
Kunststoffe Plast Europe, 1995, 85 (02):
[40] Melting model for modular self wiping co-rotating twin screw extruders
Bawiskar, S
White, JL
POLYMER ENGINEERING AND SCIENCE, 1998, 38 (05): : 727 - 740

← 1 2 3 4 5 →