Modelling and Optimization of Process Parameters for Strawberry Osmotic Dehydration Using Central Composite Rotatable Design

被引：9

作者：

Liu, Bei ^{[1
]}

Peng, Bangzhu ^{[1
]}

机构：

[1] Huazhong Agr Univ, Coll Food Sci & Technol, Minist Educ, Key Lab Environm Correlat Dietol, Wuhan 430070, Hubei, Peoples R China

来源：

JOURNAL OF FOOD QUALITY | 2017年

关键词：

MASS-TRANSFER KINETICS; STRUCTURE-PROPERTY RELATIONSHIPS; RESPONSE-SURFACE METHODOLOGY; PRETREATMENT; TOMATO; FRUITS; COLOR;

D O I：

10.1155/2017/2593213

中图分类号：

TS2 [食品工业];

学科分类号：

0832 ;

摘要：

Osmotic dehydration conditions for strawberry were optimized using central composite rotatable design. The optimal conditions included osmotic dehydration temperature of 59.5 degrees C, osmotic dehydration time of 245.6 min, and sorbitol concentration of 66.8%. Water loss (WL) exhibited a response value of 52.5% and was mainly influenced by sorbitol concentration (p = 0.01), followed by osmotic dehydration temperature (p = 0.01) and time (p = 0.01). The optimal condition was validated and found to be fitted well with the experimental data. The osmotic dehydration of strawberry was significantly influenced by osmotic dehydration temperature and time and sorbitol concentration. Based on the parameters of ANOVA, the predicted model for WL rate established by response surface quadratic regression provided an adequate mathematical description of the osmotic dehydration of strawberry.

引用

页数：7

共 50 条

[11] Kojic acid production from glycerol: Optimization using central composite rotatable design
Coelho, R. S.
Anschau, A.
Monte-Alegre, R.
JOURNAL OF BIOTECHNOLOGY, 2010, 150 : S84 - S84
[12] Optimization of transesterification of castor oil with ethanol using a central composite rotatable design (CCRD)
Cavalcante, Kiany S. B.
Penha, Maria N. C.
Mendonca, Karlene K. M.
Louzeiro, Hilton C.
Vasconcelos, Antonio C. S.
Maciel, Adeilton P.
de Souza, Antonio G.
Silva, Fernando C.
FUEL, 2010, 89 (05) : 1172 - 1176
[13] Optimization and synthesis process of biodiesel production from coconut oil using central composite rotatable design of response surface methodology
Kannan, Rajesh
Ramalingam, Sathiyamoorthi
Sampath, Senthil
Nedunchezhiyan, Mukilarasan
Dillikannan, Damodharan
Jayabal, Ravikumar
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
[14] Lipae-catalyzed synthesis of isoamyl isobutyrate - optimization using a central composite rotatable design
Krishna, SH
Sattur, AP
Karanth, NG
PROCESS BIOCHEMISTRY, 2001, 37 (01) : 9 - 16
[15] Modeling and optimization of catalytic dehydration of ethanol to ethylene using central composite design
Kong H.
Qi E.
Li G.
He S.
Zhang X.
Transactions of Tianjin University, 2009, 15 (5) : 366 - 370
[16] Modeling and Optimization of Catalytic Dehydration of Ethanol to Ethylene Using Central Composite Design
孔海宁
齐二石
李钢
何曙光
张宪
Transactions of Tianjin University, 2009, 15 (05) : 366 - 370
[17] Modeling and Optimization of Catalytic Dehydration of Ethanol to Ethylene Using Central Composite Design
孔海宁
齐二石
李钢
何曙光
张宪
Transactions of Tianjin University, 2009, (05) : 366 - 370
[18] Application of MIL-101(Cr) for biofuel dehydration and process optimization using the central composite design method
Parak, Parya
Nikseresht, Ahmad
Mohammadi, Masoud
Emaminia, Mohammad Saeid
NANOSCALE ADVANCES, 2024, 6 (18): : 4625 - 4634
[19] Optimization of photo-Fenton process parameters on carbofuran degradation using central composite design
Lu, Li A.
Ma, Ying S.
Daverey, Achlesh
Lin, Jih G.
JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART B-PESTICIDES FOOD CONTAMINANTS AND AGRICULTURAL WASTES, 2012, 47 (06) : 553 - 561
[20] Optimization of elecrospinning process of zein using central composite design
Mohammad Amin Miri
Jebrail Movaffagh
Mohammad B. Habibi Najafi
Masoud Najaf Najafi
Behrouz Ghorani
Arash Koocheki
Fibers and Polymers, 2016, 17 : 769 - 777

← 1 2 3 4 5 →