The Numerical Simulation of Rapidly Solidified Cu-Cr Alloys

被引：3
|
作者：
Zhou, Z. M. [1 ]
Xiao, Z. P. [1 ]
Wei, B. W. [1 ]
Hu, Y. [1 ]
Tang, L. W. [1 ]
Liu, C. [1 ]
机构：
[1] Chongqing Univ Technol, Sch Mat Sci & Engn, Chongqing 400054, Peoples R China
来源：
2012 INTERNATIONAL WORKSHOP ON INFORMATION AND ELECTRONICS ENGINEERING | 2012年 / 29卷
关键词：
Cu-Cr alloys; cooling rate; rapid solidification; simulation; MICROSTRUCTURE;
D O I：
10.1016/j.proeng.2012.01.599
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The simulation of rapidly solidified Cu-Cr alloys was studied in this paper. The rapidly solidified Cu-Cr alloys can be approximately modeled by one-dimensional heat conduction equation. The temperature distribution and the cooling rate of rapidly solidified Cu-Cr alloys are determined by integration of the equation. The cooling rate is inverse proportion to the square of the thickness of the alloys. The thermal diffusivity of the Cu-Cr melt and the coefficient of thermal storage of the cooling copper mediator are the most important factors that decide teh cooling rate of the alloys. The simulative results are coincident very well with the experimental results for the microstructure of rapid solidified Cu-Cr alloys prepared by melt-spinning. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of Harbin University of Science and Technology
引用
收藏
页码：3944 / 3948
页数：5
相关论文
共 50 条
  • [41] Electrochemical characterization of rapidly solidified Al-(Cr,Cu,Ni,Y,Zr)-Fe alloys
    Mlynarek-Żak, Katarzyna
    Wierzbicka-Miernik, Anna
    Kądziolka-Gawel, Mariola
    Czeppe, Tomasz
    Radoń, Adrian
    Babilas, Rafal
    Electrochimica Acta, 2022, 409
  • [42] Complete oxidation of benzene on Cu-Cr and Cu-Cr oxide catalysts
    Vass, M.I.
    Georgescu, V.
    1996, (29): : 1 - 4
  • [43] Solidification Characteristics and Microstructure Evolution of Rapidly Solidified Cu Alloys
    孔华野
    TANG Cheng
    HE Xibin
    YANG Jin'e
    XIE Jinpeng
    WANG Hongfu
    Journal of Wuhan University of Technology(Materials Science), 2022, 37 (06) : 1150 - 1154
  • [44] Solidification Characteristics and Microstructure Evolution of Rapidly Solidified Cu Alloys
    Kong Huaye
    Tang Cheng
    He Xibin
    Yang Jin'e
    Xie Jinpeng
    Wang Hongfu
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2022, 37 (06): : 1150 - 1154
  • [45] DECOMPOSITION STRUCTURES OF RAPIDLY SOLIDIFIED AL-CU ALLOYS
    SATO, T
    LONG, TT
    TEZUKA, H
    KAMIO, A
    TAKAHASHI, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1984, 48 (07) : 748 - 754
  • [46] Solidification Characteristics and Microstructure Evolution of Rapidly Solidified Cu Alloys
    Huaye Kong
    Cheng Tang
    Xibin He
    Jin’e Yang
    Jinpeng Xie
    Hongfu Wang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2022, 37 : 1150 - 1154
  • [47] Characterization of rapidly solidified Cu-Pb hypermonotectic alloys
    Xu Jin-Feng
    Fan Yu-Fang
    Chen Wei
    Zhai Qiu-Ya
    ACTA PHYSICA SINICA, 2009, 58 (01) : 644 - 649
  • [48] Internal oxidation of rapidly solidified Cu-Zr alloys
    Univ of Maribor, Slovenia
    Z Metallkd, 1 (38-44):
  • [49] Internal oxidation of rapidly solidified Cu-Zr alloys
    Anzel, I
    Kneissl, AC
    Kosec, L
    Krizman, A
    ZEITSCHRIFT FUR METALLKUNDE, 1997, 88 (01): : 38 - 44
  • [50] Undercooling and demixing in rapidly solidified Cu-Co alloys
    Battezzati, L.
    Curiotto, S.
    Johnson, E.
    Pryds, N. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 7 - 11
12345