Impact of Payload Spectra of Heavy Vehicles on Pavement Based on Weigh-in-Motion Data

被引:9
|
作者
Ren, Jing [1 ,2 ]
Thompson, Russell G. [2 ]
Zhang, Lihai [2 ]
机构
[1] City Univ Hong Kong, Dept Architecture & Civil Engn, Kowloon Tong, Hong Kong 999077, Peoples R China
[2] Univ Melbourne, Dept Infrastruct Engn, Melbourne, Vic 3010, Australia
关键词
Road freight transport; Pavement damage; Weigh-in-motion (WIM) technology; Mathematical model;
D O I
10.1061/JPEODX.0000099
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Truck traffic is a crucial factor that results in pavement damage. The increasing demand of freight transport contributes to rising truck volumes. In some countries there is a trend toward using larger vehicles, and road authorities are concerned about their effect on pavement because of the lack of pavement maintenance funding. This paper investigates the efficiency of freight transport by comparing the effect of six-axle articulated trucks (semi-trailers) and nine-axle articulated trucks (B-doubles) with regard to pavement performance when carrying various payloads based on weigh-in-motion data. Mathematical models were developed to help decision makers consider how to distribute road freight, to minimize pavement damage induced by the different types of trucks. It was found that there is reduced pavement damage when one or more of the following conditions are met: The payload of the trucks gets closer to their optimum value, the percentage of the empty vehicles is decreased, and more freight is undertaken by B-doubles. In addition, a simplified pavement performance prediction model was used as a basis to determine the future pavement maintenance and rehabilitation (M&R) schedules, and therefore help in comparing the long-term pavement treatment costs for different traffic loading scenarios. The outcome from the economic analysis shows that there would be significant benefits in the pavement M&R costs over the pavement service life by improving the distribution of freight.
引用
收藏
页数:13
相关论文
共 50 条
  • [41] Analysis of Weigh-in-Motion Data for Truck Weight Grouping in Mechanistic-Empirical Pavement Design Guide
    Kweon, Young-Jun
    Cottrell, Benjamin H., Jr.
    TRANSPORTATION RESEARCH RECORD, 2011, (2256) : 169 - 178
  • [42] Use of stochastic optimization in the analysis of weigh-in-motion data
    Chehade, F. El Hajj
    Younes, R.
    Mroueh, H.
    Chehade, F. Hage
    MAINTENANCE, SAFETY, RISK, MANAGEMENT AND LIFE-CYCLE PERFORMANCE OF BRIDGES, 2018, : 2581 - 2586
  • [43] Estimation of Average Payloads from Weigh-in-Motion Data
    Hernandez, Sarah
    TRANSPORTATION RESEARCH RECORD, 2017, (2644) : 39 - 47
  • [44] Recommended Procedure to Adjust Inaccurate Weigh-in-Motion Data
    Chou, Chih-Sheng
    Nichols, Andrew P.
    TRANSPORTATION RESEARCH RECORD, 2016, (2593) : 110 - 122
  • [45] NCDOT Quality Control Methods for Weigh-in-Motion Data
    Ramachandran, Aditya N.
    Taylor, Kent L.
    Stone, John R.
    Sajjadi, Soheil S.
    PUBLIC WORKS MANAGEMENT & POLICY, 2011, 16 (01) : 3 - 19
  • [46] A weigh-in-motion system with automatic data reliability estimation
    Brzozowski, Krzysztof
    Maczynski, Andrzej
    Rygula, Artur
    Konior, Tomasz
    MEASUREMENT, 2023, 221
  • [47] Procedure to estimate loading from weigh-in-motion data
    North Carolina Dep of Transportation, Raleigh, United States
    Transp Res Rec, 1536 (19-24):
  • [48] Sampling Schemes for Weigh-in-Motion Traffic Data Collection
    Hong, Feng
    Prozzi, Jorge A.
    Leung, Arthur
    TRANSPORTATION RESEARCH RECORD, 2008, 2049 (2049) : 38 - 44
  • [49] Development of a bridge weigh-in-motion method considering the presence of multiple vehicles
    Chen, Shi-Zhi
    Wu, Gang
    Feng, De-Cheng
    ENGINEERING STRUCTURES, 2019, 191 : 724 - 739
  • [50] Intelligent Weigh-in-Motion System Using Embedded MEMS Sensors for Pavement Monitoring
    Dong, Zejiao
    Song, Hongyang
    Ma, Xianyong
    Li, Yiheng
    Wang, Donghao
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2024, 73