Simultaneous improvement of strength and ductility in hypoeutectic Al-Si-Mg and Al-Mg alloys with high contents of Mg

被引：2
|
作者：
Ha, S. -H [1 ]
Lee, S. -Y [1 ]
Yoon, Y. -O [1 ]
Kim, B. -H [1 ]
Lim, H. -K [1 ]
Kim, S. -K [1 ]
机构：
[1] Korea Inst Ind Technol, 156 Gaetbeol Ro, Incheon 21999, South Korea
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 10卷
关键词：
Al-Si-Mg system; Al-Mg system; Ca; tensile property; Mg2Si; CAO;
D O I：
10.1016/j.matpr.2018.10.413
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Changes of strength and ductility in a hypoeutectic Al-7mass% Si-Mg with increasing Mg content and Al-7.5mass% Mg alloys with increasing Ca content were investigated. The elongation of Al-7.5mass% Mg alloy was improved with increasing Ca content up to 0.1mass% without trade-off with the strength. With increasing Mg and Ca contents simultaneously, the Al-7mass% Si alloys showed the modification of eutectic Si particles. After aging, the alloys had the distribution of residual Mg2Si in their grain boundaries with increasing Mg content over the Mg solubility. Al-7mass% Si-0.8mass% Mg alloy including a small amount of residual Mg2Si showed a significant improvement of strength after the aging. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码：327 / 331
页数：5
相关论文
共 50 条
  • [21] Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility
    Boesch, Dominik
    Pogatscher, Stefan
    Hummel, Marc
    Fragner, Werner
    Uggowitzer, Peter J.
    Goeken, Mathias
    Hoeppel, Heinz Werner
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (03): : 1035 - 1045
  • [22] Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility
    Dominik Bösch
    Stefan Pogatscher
    Marc Hummel
    Werner Fragner
    Peter J. Uggowitzer
    Mathias Göken
    Heinz Werner Höppel
    Metallurgical and Materials Transactions A, 2015, 46 : 1035 - 1045
  • [23] Hardness-strength relationships in cast Al-Si-Mg alloys
    Tiryakioglu, M
    Campbell, J
    Staley, JT
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 295 - 300
  • [24] High temperature deformation of Al-Mg and Al-Mg-Sc alloys
    Ihara, K
    Miura, Y
    ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 1377 - 1382
  • [25] Hereditary Influence of Deformed Waste on the Efficiency of Modification of Alloy Systems Al-Si-Mg and Al-Mg
    Nikitin, K., V
    Nikitin, V., I
    Timoshkin, I. Yu
    Biktimirov, R. M.
    Novikov, A. P.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2022, 63 (04) : 400 - 408
  • [26] ON OXIDATION AND REMOVAL BY DIFFUSION OF MG IN AL AND AL-MG ALLOYS
    FORSVOLL, K
    FOSS, D
    PHILOSOPHICAL MAGAZINE, 1967, 15 (134): : 329 - &
  • [27] Electrochemical oxidation of high-purity and homogeneous Al-Mg alloys with low Mg contents
    Brillas, E
    Cabot, PL
    Centellas, F
    Garrido, JA
    Perez, E
    Rodriguez, RM
    ELECTROCHIMICA ACTA, 1998, 43 (07) : 799 - 812
  • [28] Effect of the Mg contents on the annealing mechanism and shear texture of Al-Mg alloys
    Cho, Chang-Hee
    Son, Kwang-Tae
    Lee, Jae-Cheol
    Kim, Shae K.
    Yoon, Young-Ok
    Hyun, Soong-Keun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 786
  • [29] In Situ Investigations on the Ductility of an Al-Si-Mg Casting Alloy
    R. Doglione
    JOM, 2012, 64 : 51 - 57
  • [30] The effects of Mg amount on the microstructure and mechanical properties of Al-Si-Mg alloys
    Yildirim, Musa
    Ozyurek, Dursun
    MATERIALS & DESIGN, 2013, 51 : 767 - 774
12345