Strength Properties of Ultrasonic-Assisted Laser Welded Stainless Steel 321

被引：8

作者：

Kalashnikov, K. N. ^{[1
]}

Zhukov, L. L. ^{[1
]}

Kalashnikova, T. A. ^{[1
]}

Dmitriev, A. V. ^{[1
]}

机构：

[1] RAS, Inst Strength Phys & Mat Sci SB, Tomsk 634055, Russia

来源：

PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES | 2018年 / 2051卷

关键词：

D O I：

10.1063/1.5083356

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Mechanical characteristics of laser welded stainless steel 321 joints are mainly determined by the welding process parameters such as welding speed and shielding gas feed rate. Small deviation from their optimal values may result in formation of a defect and reducing the joint strength. The use of ultrasonic-assisted laser welding procedure allows expanding the optimal range of the process parameters without affecting the joint strength. In this paper, it is revealed that the stainless steel samples obtained by the laser welding at various regimes have tensile strength from 579 to 592 MPa. In turn, the use of ultrasonic made it possible to obtain welds with a strength changes from 607 to 612 MPa.

引用

页数：4

共 50 条

[11] Preliminary Investigation on Ultrasonic-Assisted Brazing of Titanium and Titanium/Stainless Steel Joints
Elrefaey, A.
Wojarski, L.
Pfeiffer, J.
Tillmann, W.
WELDING JOURNAL, 2013, 92 (05) : 148S - 153S
[12] Experimental investigation on surface quality in ultrasonic-assisted honing of 304 stainless steel
Ma, Kai
Zhu, Xijing
Cui, Xueliang
Wang, Jianqing
Yu, Ruien
Xiao, Longyong
Alamir, Mazin
Ye, Linzheng
Li, Xiangmeng
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2020, 63 (148-158): : 148 - 158
[13] Microstructure and mechanical properties of friction stir welded AISI321 stainless steel
Johnson, Pradeep
Murugan, N.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 3967 - 3976
[14] Ultrasonic vibration-assisted laser atomization of stainless steel
Alavi, S. Habib
Harimkar, Sandip P.
POWDER TECHNOLOGY, 2017, 321 : 89 - 93
[15] Corrosion of hermetically welded 321 stainless steel in aqueous solutions
Sorokina, Lioudmila V.
Aviles, Carlos E. Negrete
Higgins, Thomas B.
Gupta, Prateek
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2014, 247
[16] Mechanical Properties of Ferrite-Pearlite Steel 09G2S Welded Joints Obtained Using Ultrasonic-Assisted Laser Welding
Kalashnikova, T. A.
Vorontsov, A. V.
Beloborodov, V. A.
Kalashnikov, K. N.
PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES, 2018, 2051
[17] Investigation of microstructure and properties of low-carbon steel during ultrasonic-assisted laser welding and cladding
Gorunov, A. I.
Nyukhlaev, O. A.
Gilmutdinov, A. Kh.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (9-12): : 2467 - 2479
[18] Microstructure evolution and mechanical properties of SUS301L stainless steel sheet welded joint in ultrasonic vibration assisted laser welding
Liu, Zuguo
Jin, Xiangzhong
Zhang, Junyi
Hao, Zhongjia
Li, Junhao
OPTICS AND LASER TECHNOLOGY, 2022, 153
[19] Mechanical Properties of Laser Welded 2205 Duplex Stainless Steel
Kose, Ceyhun
Kacar, Ramazan
MATERIALS TESTING, 2014, 56 (10) : 779 - 785
[20] Investigation of microstructure and properties of low-carbon steel during ultrasonic-assisted laser welding and cladding
A. I. Gorunov
O. A. Nyukhlaev
A. Kh. Gilmutdinov
The International Journal of Advanced Manufacturing Technology, 2018, 99 : 2467 - 2479

← 1 2 3 4 5 →