Study of Joint Formed by Tungsten Carbide Bearing Alloy through Microwave Welding

被引：38

作者：

Gupta, Prateek ^{[1
]}

Kumar, Sudhir ^{[1
]}

Kumar, Ajay ^{[1
]}

机构：

[1] Noida Inst Engn & Technol, Gr Noida 201308, India

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2013年 / 28卷 / 05期

关键词：

Microstructure and mechanical properties; Microwave welding; Mild steel; Ni-based powder; Stainless steel; XRD;

D O I：

10.1080/10426914.2013.763966

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Microwave welding process is almost in the league of joining the composite materials. But, it is really challenging to align with metals because they reflect the microwaves. In this paper, mild steel and stainless steel have been joined by the microwave welding at 2.45GHz and 900W. The joint has been formed at 600sec exposure time. Ni-based powder is used to join the metals. The characterizations of joint have been carried out through microstructural analysis, tensile strength, elongation, and microhardness. The results reveal that the joint formation is clearly visible in microstructure. Tensile strength, elongation, and microhardness are 340.16MPa, 11.67%, and 130 Hv, respectively.

引用

页码：601 / 604

页数：4

共 50 条

[31] Effect of Tungsten Carbide Particles on the Characteristics of PEO Coatings Formed on AZ31B Magnesium Alloy in Alkaline Electrolyte
Zhang, Yang
Xu, Yaling
Miao, Chengping
Tu, Xiaohua
Yu, Jianxing
Li, Jiayou
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2018, 13 (08): : 7923 - 7929
[32] Optimization of parameters and study of joint microstructure of resistance spot welding of magnesium alloy
王亚荣
张忠典
李冬青
China Welding, 2006, (02) : 34 - 39
[33] Parametric study of laser cladding of AS 21 magnesium alloy with aluminium silicon/tungsten carbide powder
Mandagie, M
Brandt, M
Durandet, Y
Jahedi, M
MAGNESIUM TECHNOLOGY 2003, 2003, : 81 - 87
[34] STUDY OF THE ZIRCONIUM CARBIDE-TUNGSTEN CARBIDOMETAL ALLOY BY THE ELECTRON AUGER-SPECTROSCOPY METHOD
KAZANTSEV, AP
ZHURNAL TEKHNICHESKOI FIZIKI, 1987, 57 (07): : 1450 - 1452
[35] A study on use of wobble features in laser welding of low alloy steel joint with butt joint configuration
Kankala, Timo
Salminen, Antti
18TH NORDIC LASER MATERIALS PROCESSING CONFERENCE (18TH NOLAMP), 2021, 1135
[36] Microstructure and Wear characteristics of Fe-based Hard-facing Alloy Claddings formed by gas tungsten arc welding
Lin, C. M.
Wu, W.
THERMEC 2011, PTS 1-4, 2012, 706-709 : 3028 - 3033
[37] MICROSTRUCTURE ANALYSIS OF INTERFACIAL LAYER WITH TUNGSTEN INERT GAS WELDING-BRAZING JOINT OF ALUMINUM ALLOY/STAINLESS STEEL
Lin Sanbao
Song Jianling
Yang Chunli
Ma Guangchao
ACTA METALLURGICA SINICA, 2009, 45 (10) : 1211 - 1216
[38] Grain refinement and high performance of titanium alloy joint using arc-ultrasonic gas tungsten arc welding
He, LB
Li, LM
Hao, HW
Wu, MS
Zhou, RL
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (01) : 72 - 74
[39] Study of the influence of friction stir processing on tungsten inert gas welding of different aluminum alloy
Husain Mehdi
R. S. Mishra
SN Applied Sciences, 2019, 1
[40] Study of the influence of friction stir processing on tungsten inert gas welding of different aluminum alloy
Mehdi, Husain
Mishra, R. S.
SN APPLIED SCIENCES, 2019, 1 (07):

← 1 2 3 4 5 →