Influence of substrate temperature on structural, morphological and electrical properties of La0.6Sr0.4Co0.2Fe0.8O3 thin films for IT-SOFCs

被引:14
|
作者
Jamale, A. P. [1 ]
Dubal, S. U. [1 ]
Patil, S. P. [1 ]
Bhosale, C. H. [1 ]
Jadhav, L. D. [2 ]
机构
[1] Shivaji Univ, Dept Phys, Kolhapur 416004, Maharashtra, India
[2] Rajaram Coll, Dept Phys, Kolhapur 416004, Maharashtra, India
关键词
Nanocrystalline; Spray pyrolysis technique; Electrical conductivity; Microstructure; OXIDE FUEL-CELLS; SPRAY-PYROLYSIS; YSZ; CATHODE; MICROSTRUCTURE; CONDUCTIVITY; MECHANISMS; ELECTRODES; MEMBRANES;
D O I
10.1016/j.apsusc.2013.09.020
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The crack free, homogeneous, nanocrystalline La0.6Sr0.4Co0.2Fe0.8O3 thin films have been deposited on Ce0.9Gd0.1O1.95 electrolyte by the spray pyrolysis technique. The films with typically 1-2 pin thickness, get crystallized on annealing at 800 degrees C. In the present work, the effect of substrate temperature on microstructure, crystallization and conductivity has been systematically studied. The deposition of film at 300 degrees C shows higher in plane electrical conductivity of 26.6 S cm(-1) with activation energy, E-a = 0.23 eV. The higher conductivity attributes to uniform, thin and dense microstructure of thin films. No interfacial reaction products between La0.6Sr0.4Co0.2Fe0.8O3 and Ce-0.9 Gd0. 1O1.95 were detected upon annealing at 800 degrees C/4 h. The uniformity and porosity distribution as a function of deposition temperature clarified from Scanning Electron micrograph. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:78 / 82
页数:5
相关论文
共 50 条
  • [31] Strontium surface segregation in La0.6Sr0.4Co0.2Fe0.8O3 - δ subjected to mechanical stress
    Araki, W.
    Miyashita, M.
    Arai, Y.
    SOLID STATE IONICS, 2016, 290 : 18 - 23
  • [32] Effect of Cathode Porosity of Mixed Conducting La0.6Sr0.4Co0.2Fe0.8O3 on the Power Generating Characteristics of Anode Supported SOFCs
    Yun, Joong-Cheul
    Kim, Woo Sik
    Kim, Hyoungchul
    Lee, Jong-Ho
    Kim, Joosun
    Lee, Hae-Weon
    Kim, Byong-Ho
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2005, 42 (04) : 269 - 275
  • [33] Structural and electrical properties of selected La1-xSrxCo0.2Fe0.8O3 and La0.6Sr0.4CO0.2Fe0.6Ni0.2O3 perovskite type oxides
    Swierczek, Konrad
    Gozu, Makoto
    JOURNAL OF POWER SOURCES, 2007, 173 (02) : 695 - 699
  • [34] Silver infiltrated La0.6Sr0.4Co0.2Fe0.8O3 cathodes for intermediate temperature solid oxide fuel cells
    Sakito, Y.
    Hirano, A.
    Imanishi, N.
    Takeda, Y.
    Yamamoto, O.
    Liu, Y.
    JOURNAL OF POWER SOURCES, 2008, 182 (02) : 476 - 481
  • [35] Citrate-hydrothermal Synthesis and Electrochemical Characterization of La0.6Sr0.4Co0.2Fe0.8O3 for Intermediate Temperature SOFC
    Garcia, Laurenia M. P.
    Souza, Graziele L.
    Nascimento, Rubens M.
    Macedo, Daniel A.
    Motta, Fabiana V.
    Paskocimas, Carlos A.
    20TH BRAZILIAN CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING, 2014, 775-776 : 673 - +
  • [36] Influence of sulfur impurities on the stability of La0.6Sr0.4Co0.2Fe0.8O3 cathode for solid oxide fuel cells
    Xie, Jing
    Ju, Young-Wan
    Ishihara, Tatsumi
    SOLID STATE IONICS, 2013, 249 : 177 - 183
  • [37] Densification of La0.6Sr0.4Co0.2Fe0.8O3 ceramic by flash sintering at temperature less than 100 A°C
    Gaur, Anshu
    Sglavo, Vincenzo M.
    JOURNAL OF MATERIALS SCIENCE, 2014, 49 (18) : 6321 - 6332
  • [38] The impact of sulfur contamination on the performance of La0.6Sr0.4Co0.2Fe0.8O3 - δ oxygen transport membranes
    Alqaheem, Yousef
    Thursfield, Alan
    Zhang, Guangru
    Metcalfe, Ian S.
    SOLID STATE IONICS, 2014, 262 : 262 - 265
  • [39] Tailoring the microstructure of La0.6Sr0.4Co0.2Fe0.8O3−α cathode material: the role of dispersing agent
    Ismariza Ismail
    Nafisah Osman
    Abdul Mutalib Md Jani
    Journal of Sol-Gel Science and Technology, 2016, 80 : 259 - 266
  • [40] La0.6Sr0.4Co0.2Fe0.8O3阴极材料的微波合成工艺研究
    孟祥林
    邱凯
    石为喜
    辽宁科技学院学报, 2019, 21 (01) : 7 - 8+39