Curing and mechanical properties of nitrile and natural rubber blends

被引:40
|
作者
Ismail, H [1 ]
Tan, S [1 ]
Poh, BT [1 ]
机构
[1] Univ Sains Malaysia, Sch Ind Technol, Minden 11800, Penang, Malaysia
来源
JOURNAL OF ELASTOMERS AND PLASTICS | 2001年 / 33卷 / 04期
关键词
acrylonitrile butadiene rubber; natural rubber; blend; curing characteristics; mechanical properties;
D O I
10.1106/DQN6-QXA0-UC3W-U45H
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The curing and mechanical properties of nitrile (NBR) and natural rubber (NR) blends were carried out. Two series of blends were prepared, i.e., NBR/SMR L and NBR/ENR 50 blends. Blends were prepared using a Brabender at a temperature of 60degreesC. Results indicate that the scorch time, t(2) and cure time, t(90) increase with increasing NBR content in both blends, In NBR/ENR 50 blends the increasing content of NBR increases the maximum elastic torque, torque difference, tan delta @, MH and viscous torque. However, in NBR/SMR L blends the opposite trend is observed for maximum elastic torque and torque difference. In both blends modulus at 100% elongation (M100) and at 300% elongation (M300) increases with increasing NBR content, whereas tensile strength and elongation at break show a decreasing trend.
引用
收藏
页码:251 / 262
页数:12
相关论文
共 50 条
  • [31] Gamma radiation curing of nitrile rubber/high density polyethylene blends
    E. Elshereafy
    Maysa A. Mohamed
    M. M. EL-Zayat
    A. A. El Miligy
    Journal of Radioanalytical and Nuclear Chemistry, 2012, 293 : 941 - 947
  • [32] Evaluation of blends of natural rubber and hydrogenated nitrile rubber containing chemically modified natural rubber
    Elizabeth, K. I.
    Alex, R.
    Varghese, S.
    PLASTICS RUBBER AND COMPOSITES, 2008, 37 (08) : 359 - 366
  • [33] Mechanical and electrical properties of natural rubber and nitrile rubber blends filled with multi-wall carbon nanotube: Effect of preparation methods
    Kueseng, Pattana
    Sae-oui, Pongdhorn
    Rattanasom, Nittaya
    POLYMER TESTING, 2013, 32 (04) : 731 - 738
  • [34] Gamma radiation curing of nitrile rubber/high density polyethylene blends
    Elshereafy, E.
    Mohamed, Maysa A.
    EL-Zayat, M. M.
    El Miligy, A. A.
    JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY, 2012, 293 (03) : 941 - 947
  • [35] Mechanical properties and curing characteristics of shape memory natural rubber
    Setyadewi, N. M.
    Indrajati, I. N.
    Darmawan, N.
    INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS, 2019, 541
  • [36] The effect of adding carbon black to natural rubber/butadiene rubber blends on curing, morphological, and mechanical characteristics
    Kaliyathan, Abitha Vayyaprontavida
    Rane, Ajay Vasudeo
    Huskic, Miroslav
    Kanny, Krishnan
    Kunaver, Matjaz
    Kalarikkal, Nandakumar
    Thomas, Sabu
    JOURNAL OF APPLIED POLYMER SCIENCE, 2022, 139 (16)
  • [37] Influence of Curing Systems on Mechanical, Dynamic, and Morphological Properties of Dynamically Cured Epoxidized Natural Rubber/Copolyamide Blends
    Romin, Rawviyanee
    Nakason, Charoen
    Thitithammawong, Anoma
    ADVANCES IN RUBBER, 2014, 844 : 81 - 84
  • [38] Effect of modified graphite nanoflakes on curing, mechanical and dielectric properties of nitrile rubber nanocomposites
    E. M. Sadek
    S. M. Ahmed
    D. E. El-Nashar
    N. A. Mansour
    Polymer Bulletin, 2023, 80 : 847 - 863
  • [39] Control by the curing time of the strain induced crystallization and elastocaloric properties in natural rubber and natural/waste rubber blends
    Candau, Nicolas
    Navarrete, Albert Fernandez
    Casanova, German Lara
    Utrera-Barrios, Saul
    Santana, Marianella Hernandez
    Stoclet, Gregory
    Maspoch, Maria Lluisa
    POLYMER, 2024, 312
  • [40] Effect of modified graphite nanoflakes on curing, mechanical and dielectric properties of nitrile rubber nanocomposites
    Sadek, E. M.
    Ahmed, S. M.
    El-Nashar, D. E.
    Mansour, N. A.
    POLYMER BULLETIN, 2023, 80 (01) : 847 - 863