Non-thermal effects on B4C ceramics sintering

被引：0

作者：

Mitsudo, S ^{[1
]}

Hoshizuki, H ^{[1
]}

Matsuura, K ^{[1
]}

Saji, T ^{[1
]}

Idehara, T ^{[1
]}

Kitano, A ^{[1
]}

Nishi, H ^{[1
]}

Ishibashi, J ^{[1
]}

Sano, S ^{[1
]}

机构：

[1] Univ Fukui, Fac Engn, Cryogen Lab, Fukui 9108507, Japan

来源：

IRMMW-THZ2005: THE JOINT 30TH INTERNATIONAL CONFERENCE ON INFRARED AND MILLIMETER WAVES AND 13TH INTERNATIONAL CONFERENCE ON TERAHERTZ ELECTRONICS, VOLS 1 AND 2 | 2005年

关键词：

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Boron carbide (B4C) is one of advanced materials and is being used in a wide rage of applications. The unique feature of this material is its large neutron-absorbing cross-section. Some of its most prominent applications are controlling rods in nuclear reactors and radiation protection. 24 GHz microwave processing for B4C ceramics were performed under flowing argon gas using the sintering system. Enhanced sintering was observed in B4C ceramics for sintering with the microwave power of 2.5 kW as compare to 1.5 kW one, even at the same sintering temperature and holding time. The experiment results in different sintering conditions are presented.

引用

页码：225 / 226

页数：2

共 50 条

[41] Investigation of the effect of B4C amount and sintering temperature on the thermal properties of the material in Al 1070-B4C composites
Pehlivanl, Zuhtu Onur
Pul, Muharrem
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2021, 235 (12) : 2746 - 2761
[42] In situ synthesis and sintering of B4C/ZrB2 composites from B4C and ZrH2 mixtures by spark plasma sintering
Rehman, Sahibzada Shakir
Ji, Wei
Fu, Zhengyi
Wang, Weimin
Wang, Hao
Asif, Muhammad
Zhang, Jinyong
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (04) : 1139 - 1145
[43] Thermal stability of Mo/B4C multilayers
Barthelmess, Miriam
Bajt, Sasa
DAMAGE TO VUV, EUV, AND X-RAY OPTICS III, 2011, 8077
[44] Effects of load on tribological properties of B4C and B4C-SiC ceramics sliding against SIC balls
Zhang, Wei
Yamashita, Seiji
Kita, Hideki
JOURNAL OF ASIAN CERAMIC SOCIETIES, 2020, 8 (03): : 586 - 596
[45] Thermal Plasma Production of B4C Nanopowders
Thakkar, Nirmal
Reddy, Ramana G.
JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2006, 7 (02) : 87 - 100
[46] Selective Laser Sintering of Cermet Mixtures Ti and B4C
Filippov, A. A.
Fomin, V. M.
Malikov, A. G.
Orishich, A. M.
INTERNATIONAL CONFERENCE ON THE METHODS OF AEROPHYSICAL RESEARCH (ICMAR 2016), 2016, 1770
[47] Viscous Sintering and Structural Stabilization of Amorphous B4C Powder
Kimura, Hiroshi
MATERIALS TRANSACTIONS, 2018, 59 (02) : 265 - 271
[48] Fabrication by pressureless sintering and evaluation of SiC/B4C composites
Yoshida, Tsuyoshi
Nakahira, Atsushi
Kijima, Kazunori
Choa, Yong-Ho
Niihara, Koichi
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1997, 44 (12): : 1078 - 1082
[49] Thermodynamic modeling and investigation of the oxygen effect on the sintering of B4C
Asadikiya, Mohammad
Rudolf, Christopher
Zhang, Cheng
Boesl, Benjamin
Agarwal, Arvind
Zhong, Yu
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 699 : 1022 - 1029
[50] Improving the dry sliding-wear resistance of B4C ceramics by transient liquid-phase sintering
Ojalvo, Cristina
Sanchez-Gonzalez, Estibaliz
Guiberteau, Fernando
Borrero-Lopez, Oscar
Ortiz, Angel L.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (15) : 5286 - 5292

← 1 2 3 4 5 →