Experimental Investigation on Modal Characteristics of Plain Woven Glass/Carbon Hybrid Composite Beams with Fixed-Free End Condition

被引：0

作者：

Suman, M. L. J. ^{[1
]}

Murigendrappa, M. ^{[1
]}

Kattimani, S. ^{[1
]}

机构：

[1] Natl Inst Technol Karnataka, Dept Mech Engn, Surathkal 575025, India

来源：

ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS | 2019年 / 2057卷

关键词：

D O I：

10.1063/1.5085582

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

This paper presents an investigation on modal characteristics of plane woven glass/carbon hybrid composite beams with fixed-free end condition by experimentally. The composite beam specimens are extracted from composite laminates of 16 layers with different hybrid configurations fabricated using vacuum bagging technique. Experimentations have been performed to measure vibrational characteristics of beams. Based on the investigation, it has been revealed that hybridisation affects the vibration characteristics. First two natural frequencies of beam are increased by the use of higher stiffness fibres in the upper layer. The damping effect in the beam with carbon fibre as middle layer is found to be higher as compared to the dedicated plain woven glass composites.

引用

页数：6

共 36 条

[21] Experimental and numerical study on the modal characteristics of hybrid carbon fiber composite foam filled corrugated sandwich cylindrical panels
Yang, Jin-Shui
Ma, Li
Schroeder, Kai-Uwe
Chen, Yun-Long
Li, Shuang
Wu, Lin-Zhi
Schmidt, Ruediger
POLYMER TESTING, 2018, 68 : 8 - 18
[22] Experimental Investigation of Influence of Fibre Orientation on the Dynamic Properties of Carbon Fibre and Intra-Ply Woven Carbon-Kevlar/Epoxy Hybrid Composite
Poojary, Umanath R.
Hegde, Sriharsha
JOURNAL OF COMPOSITES SCIENCE, 2024, 8 (02):
[23] Experimental investigation of low-velocity impact characteristics of woven glass fiber epoxy matrix composite laminates of EP3 grade
Mathivanan, N. Rajesh
Jerald, J.
MATERIALS & DESIGN, 2010, 31 (09) : 4553 - 4560
[24] Influence of graphene fillers on vibration characteristics of tapered hybrid GFRP composite beams under elevated temperature condition: Numerical and experimental study
Pawgi, Akshay
Krishna, Akshay Bharadwaj
Gupta, Shikhar
Praveen, Paul A.
Arumugam, Ananda Babu
Sudhagar, Edwin P.
JOURNAL OF VIBRATION AND CONTROL, 2023, 29 (1-2) : 200 - 213
[25] Numerical prediction and experimental validation of free vibration responses of hybrid composite (Glass/Carbon/Kevlar) curved panel structure
Sahu, Pruthwiraj
Sharma, Nitin
Panda, Subrata Kumar
COMPOSITE STRUCTURES, 2020, 241
[26] Experimental investigation of the quasi-static and dynamic axial crushing behavior of carbon/glass epoxy hybrid composite tubes
Luo, Haibo
Zhang, Donghui
He, Zeqing
Li, Xin
Li, Zhaojie
MATERIALS TODAY COMMUNICATIONS, 2021, 26
[27] Experimental investigation on the study of mechanical and microstructural properties of hybrid composite cement beams reinforced with multi-walled carbon nanotubes and carbon fibres
Hunashyal, Anand M.
Quadri, Sayed S.
Banapurmath, Nagaraj R.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART N-JOURNAL OF NANOMATERIALS NANOENGINEERING AND NANOSYSTEMS, 2012, 226 (03) : 135 - 142
[28] Effect of similar and dissimilar interface layers on delamination in hybrid plain woven glass/carbon epoxy laminated composite double cantilever beam under Mode-I loading
Suman, M. L. J.
Murigendrappa, S. M.
Kattimani, Subhaschandra
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2021, 114
[29] Experimental Investigation on Low-Velocity Impact Strength of E-Glass/Carbon Fiber Reinforced Hybrid Polymer Composite
Prasad M.
Ahmed N.
Pasha A.
Manjunath A.C.
International Journal of Vehicle Structures and Systems, 2022, 14 (02) : 219 - 222
[30] Experimental Investigation on the Ductility of Concrete Deep Beams Reinforced with Basalt-Carbon and Basalt-Steel Wire Hybrid Composite Bars
Mirdarsoltany, Mohammadamin
Rahai, Alireza
Hatami, Farzad
SHOCK AND VIBRATION, 2021, 2021

← 1 2 3 4 →