PRESSURE SENSOR BASED ON SAW RESONATORS

被引：0

作者：

Benetti, M. ^{[1
]}

Cannata, D. ^{[1
]}

Di Pietrantonio, F. ^{[1
]}

Verona, E. ^{[1
]}

Marchiori, C. ^{[2
]}

Persichetti, P. ^{[2
]}

机构：

[1] CNR, Ist Acust Om Corbino, Via Fosso Cavaliere 100, I-00133 Rome, Italy

[2] D Marchiori Srl, I-04011 Aprilia, Italy

来源：

PROCEEDINGS OF THE 13TH ITALIAN CONFERENCE ON SENSORS AND MICROSYSTEMS | 2009年

关键词：

CELLULAR NEURAL-NETWORKS;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this work, we present a pressure sensor based on surface acoustic wave (SAW) resonators operating in the pressure range from 0 to 3 bar. The sensing mechanism is related to changes in the elastic constants of the substrate and, hence, in SAW phase velocity, induced by the applied pressure. In order to determine the radius of the membrane, we used a finite element method (FEM) program, using the elastic constants of the anisotropic ST-x quartz, A differential configuration has been designed to reduce parasitic phenomena due to temperature variations. The SAW elements are two 2-ports resonators operating at approximately 393 MHz and opportunely positioned on the designed circular diaphragm. SAW resonators are used as frequency-control element in the feedback branch of a Pierce oscillator circuit. The frequency shifts of the oscillators, as consequence of pressure variations, are easily measured and reported. A resolution better than 4 Pa and a linear response curve are obtained.

引用

页码：313 / +

页数：3

共 50 条

[41] SAW Pressure Sensor Based on Single-Crystal Quartz Layer Transferred on Silicon
Grousset, S.
Augendre, E.
Benaissa, L.
Signamarcheix, T.
Baron, T.
Courjon, E.
Ballandras, S.
2013 JOINT EUROPEAN FREQUENCY AND TIME FORUM & INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM (EFTF/IFC), 2013, : 980 - +
[42] Modeling and performance evaluation of 2.4GHz SAW-based pressure sensor
Wang, Wen
Lee, Keekeun
Kim, Taehyun
Park, Ikmo
Yang, Sangsik
2006 IEEE SENSORS, VOLS 1-3, 2006, : 1031 - +
[43] Frequency and Pressure Conversion Optimization Algorithm of SAW Based on a Micro Force Sensor WSN
Li, Yuanyuan
Wang, Ju
2017 CHINESE AUTOMATION CONGRESS (CAC), 2017, : 1432 - 1436
[44] Design and Simulation of the Tire Pressure Sensor Based on the SAW Resonator and the Tire Capacitor Impedance
Zhang, Xiangwen
Wang, Fei-Yue
2009 IEEE INTELLIGENT VEHICLES SYMPOSIUM, VOLS 1 AND 2, 2009, : 1173 - 1178
[45] Synthesis of ladder-type filters based on SAW resonators
V. F. Dmitriev
Technical Physics, 2002, 47 : 1024 - 1031
[46] SCATTERING LOSS OF SAW RESONATORS
HAUS, HA
ELECTRONICS LETTERS, 1976, 12 (09) : 214 - 215
[47] SAW GaN/Si BASED RESONATORS: MODELING AND EXPERIMENTAL VALIDATION
Stefanescu, A.
Muller, A.
Konstantinidis, G.
Buiculescu, V.
Dinescu, A.
Stavrinidis, A.
Neculoiu, D.
Cismaru, A.
2012 INTERNATIONAL SEMICONDUCTOR CONFERENCE (CAS), VOLS 1 AND 2, 2012, 2 : 193 - 196
[48] Cryogenic Characterization of SAW Resonators
Gugliandolo, Giovanni
Capra, Pier Paolo
Campobello, Giuseppe
Donato, Nicola
2019 14TH INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES, SYSTEMS AND SERVICES IN TELECOMMUNICATIONS (TELSIKS 2019), 2019, : 311 - 314
[49] Non-contact torque sensors based on saw resonators
Beckley, J
Kalinin, V
Lee, M
Voliansky, K
PROCEEDINGS OF THE 2002 IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM & PDA EXHIBITION, 2002, : 202 - 213
[50] Synthesis of ladder-type filters based on SAW resonators
Dmitriev, VF
TECHNICAL PHYSICS, 2002, 47 (08) : 1024 - 1031

← 1 2 3 4 5 →