Effect of Vacuum Arc Ion Beam Treatment on the Structure and Mechanical Properties of 30CrMnSiNi2A Steel

被引：1

作者：

Panin, S. V. ^{[1
,2
]}

Vlasov, I. V. ^{[1
,2
]}

Sergeev, V. P. ^{[1
,2
]}

Ovechkin, B. B. ^{[2
]}

Lyubutin, P. S. ^{[1
,2
]}

Ramasubbu, Sunder ^{[2
,3
]}

Mironov, Yu. P. ^{[1
]}

Maruschak, P. O. ^{[4
]}

机构：

[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk 634055, Russia

[2] Natl Res Tomsk Polytech Univ, Tomsk 634050, Russia

[3] Bangalore Integrated Syst Solut Pvt Ltd, Peenya Ind Area, Bangalore 560058, Karnataka, India

[4] Ternopil Ivan Puluj Natl Tech Univ, UA-46001 Ternopol, Ukraine

来源：

PHYSICAL MESOMECHANICS | 2016年 / 19卷 / 04期

关键词：

fatigue life; ion beam treatment; deformation; fracture;

D O I：

10.1134/S1029959916040068

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The paper reports on a study of the structure and mechanical properties of 3 OCrMnSiNi2A high-strength steel irradiated with a Zr+ ion beam. The effect of irradiation on the steel was assessed by optical, transmission, and scanning electron microscopy as well as by X-ray diffraction analysis of its irradiated and non-irradiated specimens 1 mm thick under static and cyclic tension, showing an increase in the fatigue life of the steel after irradiation. The deformation behavior and the mechanical properties of the specimens were compared, and the factors responsible for the increase in fatigue life were analyzed.

引用

页码：392 / 406

页数：15

共 50 条

[41] Study on the Influence of Repair Welding Process on the Microstructure and Mechanical Properties About 30CrMnSiNi2A High-Strength Steel Weld Joints
Min Zhang
Mingke Du
Bingxian Zhang
Longyu Lei
Zhiqiang Zhang
Zhao Guo
Chuandong Gou
Transactions of the Indian Institute of Metals, 2024, 77 : 457 - 467
[42] Study on the Influence of Repair Welding Process on the Microstructure and Mechanical Properties About 30CrMnSiNi2A High-Strength Steel Weld Joints
Zhang, Min
Du, Mingke
Zhang, Bingxian
Lei, Longyu
Zhang, Zhiqiang
Guo, Zhao
Gou, Chuandong
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 77 (2) : 457 - 467
[43] Surface characterization of plasma rotating electrode atomized 30CrMnSiNi2A steel powder
Liu, Wensheng
Duan, Youteng
Ma, Yunzhu
Cai, Qingshan
Li, Jie
Wen, Zhongliu
APPLIED SURFACE SCIENCE, 2020, 528
[44] Investigation on repairing 30CrMnSiNi2A steel with laser additive and subtractive hybrid remanufacturing technology
Xu, Zifa
Ouyang, Wentai
Jiao, Junke
Liu, Yufan
Gao, Xuehao
Luo, Wensheng
Zhang, Wenwu
Liu, Yongyue
OPTICS AND LASERS IN ENGINEERING, 2023, 160
[45] Microstructure Characteristics of 30CrMnSiNi2A Steel After Ultrasound-Aided Deep Rolling
Junfeng Xie
Youli Zhu
Yuanlin Huang
Chang Bai
Xionglin Ye
Journal of Materials Engineering and Performance, 2013, 22 : 1642 - 1648
[46] Microstructure Characteristics of 30CrMnSiNi2A Steel After Ultrasound-Aided Deep Rolling
Xie, Junfeng
Zhu, Youli
Huang, Yuanlin
Bai, Chang
Ye, Xionglin
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (06) : 1642 - 1648
[47] Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures
Qiu-lin Niu
Wei-wei Ming
Ming Chen
Si-wen Tang
Peng-nan Li
Journal of Iron and Steel Research(International), 2017, 24 (07) : 724 - 729
[48] Investigation on the Cutting Performance of High-Speed Dry Milling for 30CrMnSiNi2A Steel
Song, Lei
Yan, Chunping
Yang, Mao
Tu, Gan
STEEL RESEARCH INTERNATIONAL, 2024,
[49] Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures
Niu, Qiu-lin
Ming, Wei-wei
Chen, Ming
Tang, Si-wen
Li, Peng-nan
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2017, 24 (07) : 724 - 729
[50] Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures
Qiu-lin Niu
Wei-wei Ming
Ming Chen
Si-wen Tang
Peng-nan Li
Journal of Iron and Steel Research International, 2017, 24 : 724 - 729

← 1 2 3 4 5 →