Novel composite solid state electrolytes on the base of BaCeO3 and CeO2 for intermediate temperature electrochemical devices

被引:56
|
作者
Medvedev, D. [1 ]
Maragou, V. [2 ]
Pikalova, E. [1 ]
Demin, A. [1 ]
Tsiakaras, P. [2 ]
机构
[1] Inst High Temp Electrochem, Lab Solid Oxide Fuel Cells, Ekaterinburg 620990, Russia
[2] Univ Thessaly, Sch Engn, Dept Mech Engn, Volos 38334, Volos, Greece
基金
俄罗斯基础研究基金会;
关键词
Mixed ion conductor; Composite electrolyte; Doped ceria; Doped barium cerate; IT-SOFCs; Combustion synthesis; OXIDE FUEL-CELL; DOPED CERIA; COMBUSTION SYNTHESIS; PROTONIC CONDUCTION; ELECTRICAL-CONDUCTIVITY; ELECTRONIC CURRENT; SOFC; TRANSPORT; SYSTEM; FILM;
D O I
10.1016/j.jpowsour.2012.07.120
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In the present work, nano-sized powders of (1-x)Ce0.8Sm0.2O2-delta-xBaCe(0.8)Sm(0.2)O(3-delta) (x = 0, 0.3, 0.5, 0.7 and 1) were obtained by solution combustion synthesis (self-combustion synthesis, SCS) method of nitrate and various types of organic fuels (glycine, glycerin, citric acid and a mixture of citric acid and ethylene glycol). The research results indicate that the finest powders by using the SCS process are formed when the perovskite concentration is decreased in the system under study, as well as when as the fuel glycerin or a mixture of citric acid and ethylene glycol are used. The use of the specific method allows the preparation of dense composite ceramics at 1500 degrees C. The investigation of the electrical properties of the composites at a wide range of temperatures and oxygen partial pressures shows that 0.5Ce(0.8)Sm(0.2)O(0.2-delta)-0.5BaCe(0.8)Sm(0.2)O(3-delta) material is characterized by relatively good stability against CO2, acceptable value of total conductivity and the lowest contribution of electron conductivity in both oxidizing and reducing atmospheres. (C) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码:217 / 227
页数:11
相关论文
共 50 条
  • [31] Novel chemical route for CeO2/MWCNTs composite towards highly bendable solid-state supercapacitor device
    Pandit, Bidhan
    Sankapal, Babasaheb R.
    Koinkar, Pankaj M.
    SCIENTIFIC REPORTS, 2019, 9 (1)
  • [32] X-RAY CE L(III) ABSORPTION IN CEO2 AND BACEO3 - EXPERIMENT AND INTERPRETATION ON THE BASIS OF LMTO BAND-STRUCTURE CALCULATIONS
    FINKELSTEIN, LD
    POSTNIKOV, AV
    EFREMOVA, NN
    KURMAEV, EZ
    MATERIALS LETTERS, 1992, 14 (2-3) : 115 - 118
  • [33] COMPOSITE SOLID ELECTROLYTES BASED ON CaZrO3 AS COMPONENTS FOR ELECTROCHEMICAL DEVICES APPLIED IN METALLURGY
    Dudek, Magdalena
    Rog, Grzegorz
    Bogusz, Wladyslaw
    COMPOSITES THEORY AND PRACTICE, 2005, 5 (04): : 14 - U277
  • [34] Silicon dioxide coating of CeO2 nanoparticles by solid state reaction at room temperature
    Cui, HT
    Hong, GY
    Wu, XY
    Hong, YJ
    MATERIALS RESEARCH BULLETIN, 2002, 37 (13) : 2155 - 2163
  • [35] Boosting electrochemical performance of Ho3+and Sm3+co-doped CeO2 intermediate-temperature solid oxide membrane fuel cells by NiO
    Wang, Hongtao
    Wang, Shouyue
    Huang, Yanting
    Yang, Haodong
    Zhang, Zhen
    CERAMICS INTERNATIONAL, 2023, 49 (22) : 36123 - 36129
  • [36] 3D-printed solid-state electrolytes for electrochemical energy storage devices
    Meng Cheng
    Yizhou Jiang
    Journal of Materials Research, 2021, 36 : 4547 - 4564
  • [37] 3D-printed solid-state electrolytes for electrochemical energy storage devices
    Cheng, Meng
    Jiang, Yizhou
    JOURNAL OF MATERIALS RESEARCH, 2021, 36 (22) : 4547 - 4564
  • [38] Effect of Ag and CeO2 on friction and wear properties of Ni-base composite at high temperature
    Li, Jianliang
    Xiong, Dangsheng
    Huang, Zhongjia
    Kong, Jian
    Dai, Jihui
    WEAR, 2009, 267 (1-4) : 576 - 584
  • [39] An Interface Heterostructure of NiO and CeO2 for Using Electrolytes of Low-Temperature Solid Oxide Fuel Cells
    Li, Junjiao
    Xie, Jun
    Li, Dongchen
    Yu, Lei
    Xu, Chaowei
    Yan, Senlin
    Lu, Yuzheng
    NANOMATERIALS, 2021, 11 (08)
  • [40] Solid state sintering of lime in presence of La2O3 and CeO2
    Bhattacharya, TK
    Ghosh, A
    Tripathi, HS
    Das, SK
    BULLETIN OF MATERIALS SCIENCE, 2003, 26 (07) : 703 - 706