Graphical Addenda in the Technological Area of the Nodular Iron Cast Rolls Production

被引:0
|
作者
Kiss, Imre [1 ]
Maksay, Stefan [1 ]
机构
[1] Univ Politehn Timisoara, Fac Engn Hunedoara, RO-331128 Hunedoara, Romania
关键词
iron rolls; alloying elements; hardness; modelling; graphical addenda;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The technical conditions, which are imposed to the cast iron rolls in the exploitation period, are very different and often contradictory. The obtaining of various physical and mechanical properties in the different points of the same foundry product meets difficult technological problems in the industrial condition. One of the parameters, which determine the structure of the irons destined for rolls casting, is the chemical composition. If we not respect this composition, which guaranties the exploitation properties of the each roll in the stand of rolling mill, it will lead to rejection. Alloying elements have in principle the same influence on structure and properties. This paper suggest a mathematical interpretation of the influence of the main alloy elements over the mechanical characteristics (the hardness on the crust and on the necks of the rolls) of this nodular irons, resulting the average values and average square aberration of the variables HB, and the main alloying elements (Cr, Ni, Mo), the equations of the hyper surface in the four dimensional space. For the statistical and mathematical analysis, there were used 23 industrial cases. The resulted surfaces, belonging to the three-dimensional space, can be represented and, therefore, interpreted by technologists. Knowing these level curves allows the correlation of the values of the twos independent variables so that the hardness can be obtained in between the requested limits. The paper presents the results of some researches regarding the chemical composition of the nodular irons destined for casting half-hard rolls. It is presented, in graphical form, used the Matlab area, the influence of the main alloying elements upon the hardness, and measured on the necks and the core of the rolls, respectively on the working surface (body) of these very important rolling mill components The realization of an optimal chemical composition can constitute a technical efficient mode to assure the exploitation properties, the material from which the rolling mills cylinders are manufactured having an important role in this sense. From this point of view is applied the mathematical molding, which is achieved starting from the differentiation on rolls component parts, taking into consideration the industrial data obtained from the hardness mensuration on rolls, which recommends the hardness, for different chemical compositions.
引用
收藏
页码:15 / 27
页数:13
相关论文
共 50 条
  • [21] Production of Hot-Worked Bars and Tubes of Nodular Cast Iron
    A. G. Suslov
    G. I. Kats
    Metallurgist, 2002, 46 : 205 - 207
  • [22] SHELL MOLDING WITH THE DISAMATIC FOR PRODUCTION OF NODULAR CAST-IRON PARTS
    LEJARDI, JA
    FONDERIE, 1979, 34 (386): : 49 - 50
  • [23] PROFITIBILITY IN PRODUCTION OF CRUDE NODULAR CAST-IRON PARTS ON THE DISAMATIC
    SCHNEIDER, L
    FONDERIE, 1979, 34 (386): : 64 - 64
  • [24] Evaluation of the Metallurgical Quality of Nodular Cast Iron in the Production Conditions of a Foundry
    Dwulat, Rafal
    Janerka, Krzysztof
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2023, 7 (01):
  • [25] Difficulties in the Production of Ausferritic Nodular Cast Iron without Heat Treatment
    Stawarz, M.
    Lenert, M.
    Piasecki, K.
    ARCHIVES OF FOUNDRY ENGINEERING, 2023, 23 (03) : 5 - 11
  • [26] Production of hot-worked bars and tubes of nodular cast iron
    Suslov, AG
    Kats, GI
    METALLURGIST, 2002, 46 (7-8) : 205 - 207
  • [27] Magnetodynamic pouring of nodular cast iron
    Nisenboim, Z.B.
    Soviet Castings Technology (English translation of Liteinoe Proizvodstvo), 1989, (08): : 21 - 25
  • [28] Plate Fracture of Nodular Cast Iron
    Heckmann, C. J.
    Stets, W.
    Wolf, G.
    SCIENCE AND PROCESSING OF CAST IRON IX, 2011, 457 : 367 - 373
  • [29] Hydrogen embrittlement of nodular cast iron
    Sahiluoma, Patrik
    Yagodzinskyy, Yuriy
    Forsstrom, Antti
    Hanninen, Hannu
    Bossuyt, Sven
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2021, 72 (1-2): : 245 - 254
  • [30] On the application of beinite nodular cast iron
    Agapova, L.I.
    Alikina, E.S.
    Ivliev, V.S.
    Kokina, T.V.
    Pol', V.B.
    Liteinoe Proizvodstvo, 1994, (01): : 8 - 9